Fabrication and Thermal Characterization of Composite Cu-CNT Micropillars for Capillary-driven Phase-Change Cooling Devices
Source abstract
Abstract
This paper presents the fabrication, testing, and modeling of an array of composite copper-carbon nanotubes (Cu-CNT) micropillars as a wick structure for potential application in passive phase-change cooling systems. This novel wick structure has a larger spacing at the base of the micropillars to provide a higher liquid permeability and mushroom-like structures on the top surface of the micropillars with a smaller spacing to provide a greater capillary pressure. The composite Cu-CNT micropillars were fabricated by an electrochemical deposition method on a patterned copper template. Cauliflower-like nanostructures were then grown on the top surface of the micropillars using chronoamperometry technique to improve the capillary pressure and thermal performance of the wick structure. After successful fabrication of the micropillars, a series of tests were conducted to quantify the thermal performance of the wick structures. The results demonstrate superior thermal and corrosion performances for composite Cu-CNT micropillars compared to those of copper micropillars. Additionally, a thermal resistance network analysis was conducted to model the thermal performance of the fabricated mushroom-shaped micropillar array. Model predictions were compared with the experimental results and good agreement was observed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Heat Transfer and Optimization · Phase Change Materials Research · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Southern Illinois University Edwardsville, Edwardsville, IL, USA
References (30)
Show source-provided references
1. Peterson G. P. · 1994
2. Reay D. · 2013
3. 10.1016/j.ijheatmasstransfer.2017.03.03410.1016/j.ijheatmasstransfer.2017.03.034 ↗
4. 10.1016/j.expthermflusci.2016.12.00610.1016/j.expthermflusci.2016.12.006 ↗
5. 10.1016/j.applthermaleng.2017.01.08910.1016/j.applthermaleng.2017.01.089 ↗
6. 10.1080/15567265.2013.87841910.1080/15567265.2013.878419 ↗
7. Vadakkan U. · 2007
8. 10.1016/j.ijheatmasstransfer.2007.01.03010.1016/j.ijheatmasstransfer.2007.01.030 ↗
9. 10.1088/0957-4484/17/19/01110.1088/0957-4484/17/19/011 ↗
10. 10.1115/1.400046910.1115/1.4000469 ↗
11. 10.1080/15567265.2011.64600010.1080/15567265.2011.646000 ↗
12. 10.1109/JMEMS.2010.204392210.1109/JMEMS.2010.2043922 ↗
13. 10.1109/JMEMS.2010.205101910.1109/JMEMS.2010.2051019 ↗
14. 10.1016/j.icheatmasstransfer.2017.05.02710.1016/j.icheatmasstransfer.2017.05.027 ↗
15. 10.1080/15567265.2011.59749210.1080/15567265.2011.597492 ↗
16. 10.1115/1.316053810.1115/1.3160538 ↗
17. 10.1016/j.ijheatmasstransfer.2011.10.05310.1016/j.ijheatmasstransfer.2011.10.053 ↗
18. 10.1109/TCPMT.2011.213272110.1109/TCPMT.2011.2132721 ↗
19. 10.1016/j.ijheatmasstransfer.2016.04.10710.1016/j.ijheatmasstransfer.2016.04.107 ↗
20. 10.1021/acs.langmuir.5b0450210.1021/acs.langmuir.5b04502 ↗
21. 10.1038/s41378-018-0004-710.1038/s41378-018-0004-7 ↗
22. Wu H. · IEEE Rev. Adv. Micro/Nano Mol. Syst. · 2006 · 1 · 211
23. Kline S. J. · Mech. Eng. · 1953 · 75 · 3
24. 10.1016/S0017-9310(02)00541-010.1016/S0017-9310(02)00541-0 ↗
25. Park K. · 2002
26. 10.1016/S0009-2614(03)00956-410.1016/S0009-2614(03)00956-4 ↗
27. 10.1063/1.179437010.1063/1.1794370 ↗
28. 10.1088/2053-1591/2/7/07550110.1088/2053-1591/2/7/075501 ↗
29. 10.1016/j.jallcom.2009.02.05310.1016/j.jallcom.2009.02.053 ↗
30. 10.1016/j.jallcom.2009.04.01410.1016/j.jallcom.2009.04.014 ↗