Characterization of curve ribbon boride with blocks in a Ti–45Al–2Nb–2Mn–1B alloy
Source abstract
Abstract
Abstract Borides are very important in cast TiAl alloys. Among various morphologies and structures, the long curve ribbon borides are harmful to mechanical properties and need to be avoided or refined. The knowledge on curve ribbon is relatively less than fine boride particles. In the present work, a long ribbon with blocky borides at both ends is studied by SEM, HRTEM, and STEM-EDS method. The ribbon consists of nanoflakes of 4 boride structures and a B2 layer. The blocky boride is Ti3B4 with a D7b structure. The ribbon contains flakes with the structures of D7b, B27, Bf, C32, and B2. The block is adhesive to the ribbon by a B2 layer with a width of several nanometers. Mn is found to segregate to B2/borides interfaces inside the ribbon. Nb is rich in borides but poor in the B2 phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Appel · 2011
2. Huang · 2000
3. Intermetallic alloys based on gamma titanium aluminide
4. Status of investment cast gamma titanium aluminides in the USA10.1016/0921-5093(96)10234-3 ↗
5. Advances and challenges of TiAl base alloys
6. Bewlay · 2013
7. Smarsly · 2015
8. Progress in the understanding of gamma titanium aluminides
9. The mechanism of grain refinement in TiAl alloys by boron addition- an alternative hypothesis10.1016/S0966-9795(99)00063-1 ↗
10. Effect of composition on grain refinement in TiAl-based alloys10.1016/S0966-9795(01)00079-6 ↗
11. Advances in optimization of mechanical properties in cast TiAl alloys10.1016/j.intermet.2004.12.002 ↗
12. Carbide precipitation in γ-TiAl alloys10.1016/0956-716X(92)90564-U ↗
13. Structure of perovskite carbide and nitride precipitates in L10-ordered TiAl10.1080/01418619308219379 ↗
14. Chen · 1993
15. Tracer solute diffusion of Nb, Zr, Cr, Fe, and Ni in g-TiAl: effect of preferential site occupation10.1016/S0966-9795(01)00025-5 ↗
16. Effects of niobium on phase composition and improving mechanical properties in TiAl alloy reinforced by Ti2AlC10.1016/j.intermet.2019.106630 ↗
17. Solidification and grain refinement in Ti(48–50)Al2Mn2Nb1B alloys10.1016/j.intermet.2018.07.018 ↗
18. Role of boron in TiAl alloy development: a review10.1007/s12598-015-0615-1 ↗
19. Effect of TiB2 additions on the colony size of near gamma titanium aluminides10.1016/0956-716X(90)90562-U ↗
20. Larsen · 2011
21. Kremmer · 2007
22. Bewlay · 2013
23. Kim · 2014
24. Structuralstability and the alloying effect of TiB polymorphs in TiAl alloys10.1016/j.intermet.2017.07.002 ↗
25. The structure of ribbon borides in a Ti–44Al–4Nb–4Zr–1B alloy10.1016/j.intermet.2005.11.013 ↗
26. Evolution of boride morphologies in TiAl–B alloys10.1007/BF02667377 ↗
27. Boride formation behaviour and their effect on tensile ductility in cast TiAl-based alloys10.1016/j.matdes.2020.109064 ↗
28. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
29. Effect of boron addition on tensile ductility in lamellar TiAl alloys10.1016/S0966-9795(02)00087-0 ↗
30. Microstructure and tensile properties of investment cast Ti–46Al–8Nb–1B alloy10.1016/S1359-6462(02)00140-9 ↗
31. Effect of yttria inclusion on room temperature tensile properties ofinvestment cast TiAl10.1016/j.msea.2017.11.100 ↗
32. Effect of cooling rate on boride and room temperature tensile properties of β-solidifying γ-TiAl alloys
33. Diffraction artefacts from twins and stacking faults, and the mirage of hexagonal, polytypes or other superstructures10.1016/j.scriptamat.2020.11.014 ↗
34. Investigation on the 1000, 1150 and 1400oC is othermal section of the Ti-Al-Nb system10.1016/0966-9795(95)00012-N ↗
35. Phase equilibria and microstructural control of gamma TiAl based alloys10.1016/S0966-9795(98)00049-1 ↗
36. Deformability and microstructure transformation of pilot ingot of Ti-45Al-(8-9)Nb-(W,B,Y) alloy10.1016/j.msea.2005.09.110 ↗
37. Murray · 1986
38. B2 precipitates and distribution of W in a Ti–47Al–2W–0.5Si alloy10.1016/S0966-9795(02)00043-2 ↗