Silane modified Cr2O3/polyimide nanocomposite films with excellent surface insulation performance for space applications
Source abstract
Abstract
Abstract The exploration of deep space significantly increases the probability of spacecraft failures due to surface electrostatic discharge, which imposes higher vacuum insulation protection requirements on polyimide (PI), the external insulation material of spacecrafts. To address this challenge, this study proposes using silane coupling agent KH550 for organic grafting treatment of Cr2O3 nanoparticles, which are then used to dope and modify PI to enhance the vacuum surface insulation of PI films. The KH550 grafting improves the interface strength between the fillers and the matrix, allowing the fillers to be uniformly dispersed in the matrix. Compared to pure PI films, the prepared PI-Cr2O3@KH550 composite films exhibit significantly enhanced vacuum surface flashover voltage, improved surface/volume resistivity, and dielectric properties. The results demonstrate that PI composite films with 0.8% by mass of Cr2O3@KH550 show the most notable performance improvement, with the DC flashover voltage and impulse flashover voltage in vacuum increasing by 20.7% and 27.8%, respectively. The doping of chromium oxide nanoparticles introduces more deep traps into the PI films and reduce the surface resistivity. The higher deep trap density inhibits charge migration, thereby alleviating secondary electron emission and surface electric field distortion. Simultaneously, the lower surface resistivity facilitates dissipating surface charges and improves the surface insulation. These findings are of significant reference value for promoting the enhancement of aerospace insulation performance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High voltage insulation and dielectric phenomena · Silicone and Siloxane Chemistry · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Tailoring organic/inorganic interface trap states of metal oxide/polyimide toward improved vacuum surface insulation10.1021/acsami.3c07998 ↗
2. Advances in polyimide‐based materials for space applications10.1002/adma.201807738 ↗
3. Double‐layer nacre‐inspired polyimide‐mica nanocomposite films with excellent mechanical stability for LEO environmental conditions10.1002/adma.202105299 ↗
4. Scalable polyimide‐organosilicate hybrid films for high‐temperature capacitive energy storage10.1002/adma.202211487 ↗
5. The solar probe plus mission: humanity’s first visit to our star10.1007/s11214-015-0211-6 ↗
6. Vacuum recovery of polyimide films damaged with high energy electron radiation10.1007/s40295-022-00336-w ↗
7. A review of the space environment effects on spacecraft in different orbits10.1109/ACCESS.2019.2927811 ↗
8. Design of 100kW distributed reconfigurable electrical power system for spacecraft10.3969/j.issn.1673-8748.2021.01.013 ↗
9. Development of 400 V solar array technology for low earth orbit plasma environment10.1109/TPS.2006.883287 ↗
10. Research on electrostatic discharge test of high-voltage solar array for LEO spacecraft10.3969/j.issn.1673-8748.2021.01.018 ↗
11. Experimental study on the flashover characteristics of typical medium materials of spacecraft along the surface10.54097/ajst.v2i3.1580 ↗
12. Gases released by surface flashover of insulators10.1063/1.340055 ↗
13. Mechanism of vacuum flashover on surface roughness10.1088/1361-6463/ab05a0 ↗
14. Tailoring the vacuum flashover characteristics of insulation by 3D printed random surface microstructures10.13336/j.1003-6520.hve.20220378 ↗
15. Flashover of insulators in vacuum: the last twenty years10.1109/TDEI.2015.004702 ↗
16. Effects of Cr2O3 addition on microstructure and vacuum flashover performance of glass-ceramics10.1109/TDEI.2014.004296 ↗
17. Significantly improved surface flashover characteristics of insulators in vacuum by direct fluorination10.1016/j.colsurfa.2014.04.061 ↗
18. Surface modifications of polystyrene and their stability: a comparison of DBD plasma deposition and direct fluorination10.1016/j.apsusc.2018.07.211 ↗
19. Mechanism of F2/N2 fluorination mitigating vacuum flashover of polymers10.1088/1361-6463/ab2583 ↗
20. Unraveling the role of surface molecular structure on vacuum flashover for fluorinated copolymers10.1016/j.apsusc.2019.144432 ↗
21. Surface modification of epoxy resin using He/CF4 atmospheric pressure plasma jet for flashover withstanding characteristics improvement in vacuum10.1016/j.apsusc.2017.03.278 ↗
22. Atmospheric-pressure plasma jet deposition of bumpy coating improves polypropylene surface flashover performance in vacuum10.1016/j.surfcoat.2020.125511 ↗
23. Surface flashover performance of epoxy resin microcomposites infulenced by ozone treatment10.23919/ISEIM.2017.8088730 ↗
24. Mechanism of ozone-improved surface flashover performance of epoxy composites10.1016/j.matchemphys.2022.126426 ↗
25. DC surface flashover characteristics of polyimide in vacuum under electron beam irradiation10.1109/TDEI.2014.004104 ↗
26. Improvement and mechanism of surface flashover performances of epoxy nanocomposites treated by electron beam irradiation10.13334/j.0258-8013.pcsee.201267 ↗
27. Pulsed vacuum flashover of TiO2, Al2O3, Cr2O3 and their coextruded films on epoxy substrate10.1109/ISEIM.2008.4664574 ↗
28. Novel spacer coated with functionally graded ZnO film for HVDC gas insulated line10.1109/TDEI.2019.008396 ↗
29. Ultralow secondary electron emission and improved vacuum surface insulation of polyimide with scalable nanocomposite coating10.1016/j.apsusc.2022.153221 ↗
30. Effects of surface “micro-holes” on the flashover properties of a disk-type ceramic-vacuum insulator10.1016/j.vacuum.2017.03.036 ↗
31. Sharp improvement of flashover strength from composite micro-textured surfaces10.1063/1.4991934 ↗
32. Design and 3D printing of porous cavity insulation structure for ultra‐high electrical withstanding capability10.1049/hve2.12326 ↗
33. Improvement of surface flashover in vacuum10.1049/hve.2020.0021 ↗
34. Microstructures and electrical properties of nanostructured Cr2O3 thin films deposited by dual-target reactive high-power impulse magnetron sputtering10.1016/j.vacuum.2019.03.035 ↗
35. Electrical and thermal properties of polyimide/silica nanocomposite10.1080/17458080.2010.547950 ↗
36. Physical mechanism analysis of improvement of vacuum surface flashover performance by nano-TiO2 composite modification10.13334/j.0258-8013.pcsee.230540 ↗
37. DC surface flashover characteristics of Al2O3/epoxy composites at cryogenic temperature10.1016/j.cryogenics.2024.103782 ↗
38. Charge transport characteristics of ZnO/polyimide nanocomposite under vacuum DC flashover10.1109/CEIDP50766.2021.9705326 ↗
39. Surface flashover characteristics in polyimide/ZnO nanocomposite under DC voltage in vacuum10.1109/TDEI.2015.004318 ↗
40. Epoxy-based high-k composite vitrimer: with low dielectric loss, high breakdown strength and surface electrical damage repairability10.1016/j.cej.2023.145199 ↗
41. Identification of electron and hole trap based on isothermal surface potential decay model10.1063/1.4792491 ↗
42. DC electrical treeing characteristics for the epoxy resin composites doped with different Al2O3 particle sizes10.13334/j.0258-8013.pcsee.212241 ↗
43. Layer-by-layer self-assembly strategy for surface modification of aramid fibers to enhance interfacial adhesion to epoxy resin10.3390/polym 10080820 ↗
44. Solution combustion synthesis of nano-chromia as catalyst for the dehydrofluorination of 1, 1-difluoroethane10.1007/s10853-016-0313-x ↗
45. X-ray photoelectron spectroscopy studies of reactions on chromium metal and chromium oxide surfaces10.1016/j.elspec.2010.12.001 ↗
46. Fabrication of microsphere-like nano-MoO2 modified with silane coupling agent KH55010.1088/2053-1591/ab4b7e ↗
47. The effect of Mn/Ti surface treatment on voltage‐holdoff performance of alumina insulators in vaccum10.1063/1.324498 ↗
48. Depositing chromium oxide film on alumina ceramics enhances the surface flashover performance in vacuum via PECVD10.1016/j.surfcoat.2020.126509 ↗
49. The role of interfacial H-bonding on the electrical properties of UV-cured resin filled with hydroxylated Al2O3 nanoparticles10.1088/1361-6528/ab824f ↗
50. Impulsive flashover characteristics and Weibull statistical analysis of gas-solid interfaces with varying relative humidity10.1109/ACCESS.2020.3046088 ↗
51. Optical studies of surface discharge under dc voltage in vacuum10.1109/94.993734 ↗
52. Flashover strength improvement and multipactor suppression in vacuum using surface charge pre-conditioning on insulator10.1063/1.5048063 ↗
53. Molecular modeling of electron traps in polymer insulators: chemical defects and impurities10.1063/1.1385160 ↗
54. Trap energy distribution in polymeric insulating materials through surface potential decay method10.1109/TDEI.2017.006886 ↗
55. Charging and flashover induced by surface polarization relaxation process10.1063/1.348832 ↗
56. Nanoparticle surface modification induced space charge suppression in linear low density polyethylene10.1063/1.3275732 ↗
57. Mechanism of highly improved electrical properties in polypropylene by chemical modification of grafting maleic anhydride10.1088/0022-3727/49/41/415301 ↗
58. Influence of functionalized MgO nanoparticles on electrical properties of polyethylene nanocomposites10.1109/TDEI.2015.7116346 ↗
59. Vlasov simulation of the emissive plasma sheath with energy-dependent secondary emission coefficient and improved modeling for dielectric charging effects10.3389/fphy.2022.1006451 ↗
60. Integrated modelling of vacuum flashover development: above‐surface processes and breakdown threshold analyses10.1049/hve2.12386 ↗
61. A new potential barrier model in epoxy resin nanodielectrics10.1109/TDEI.2011.6032822 ↗
62. Proposal of a multi-core model for polymer nanocomposite dielectrics10.1109/TDEI.2005.1511092 ↗
63. Effect of different nanoparticles on tuning electrical properties of polypropylene nanocomposites10.1109/TDEI.2017.006183 ↗