journal article·2020-06-03Open access

Cellulose hydrogel skeleton by extrusion 3D printing of solution

Xiangzhou Hu, Zhijie Yang, Senxian Kang, Man Jiang, Zuowan Zhou, Jihua Gou, David Hui, Jing He

Nanotechnology Reviews· Volume 9· Issue 1

Abstract

Abstract Cellulose is the most abundant natural polymer on earth, which has obtained increasing interest in the field of functional materials development for its renewable, high mechanical performance and environmental benign. In this study, the traditional processing method (wet spinning and film production) of cellulose-based materials was applied by using cellulose solution for 3D printing, which can directly build complex 3D patterns. Herein, a natural cellulose is dissolved in an effective mixed aqueous solution of dimethyl sulfoxide (DMSO) and tetrabutylammonium hydroxide (TBAH). The cellulose solution extrusion was controlled by a modified fused deposition modeling (FDM) 3D printer. During the controlled extrusion 3D printing process, the viscous cellulose solution will gelifies and further solidifies into a predetermined 3D pattern at room temperature in air. Subsequently, a cellulose hydrogel skeleton was obtained, when the 3D pattern was solvent-exchanged with deionized water. Finally, the mechanical and swelling performance of the cellulose hydrogel scaffold was improved by a cross-linking agent treatment method. With treatment of the 3D printed scaffolds in 0.8 wt% cross-linking agent solution, the obtained cellulose hydrogel could absorb 28 g/g water, and the compression strength was 96 kPa. This work provided an efficient way to prepare natural cellulose hydrogel by 3D printing under room temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Advanced Technologies of Materials (Ministry of Education), School of Materials Science and Engineering, Southwest Jiaotong University , Chengdu , 610031 , China

Department of Mechanical and Aerospace Engineering, University of Central Florida , Orlando , FL 32816 , United States of America

Composite Material Research Laboratory, Department of Mechanical Engineering, University of New Orleans , New Orleans , LA 70148 , United States of America

Key Laboratory of Development and Application of Rural Renewable Energy, Biogas Institute of Ministry of Agriculture and Rural Affairs , Chengdu 610041 , China

References (44)

Show source-provided references
1. Kelly BE, Bhattacharya I, Heidari H, Shusteff M, Spadaccini CM, Taylor HK. Volumetric additive manufacturing via tomographic reconstruction. Science. 2019 Mar;363(6431):1075–9.10.1126/science.aau7114 ↗
2. Saha SK, Wang D, Nguyen VH, Chang Y, Oakdale JS, Chen SC. Scalable submicrometer additive manufacturing. Science. 2019 Oct;366(6461):105–9.10.1126/science.aax8760 ↗
3. Walker DA, Hedrick JL, Mirkin CA. Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface. Science. 2019 Oct;366(6463):360–4.10.1126/science.aax1562 ↗
4. Kelly CN, Miller AT, Hollister SJ, Guldberg RE, Gall K. Design and Structure-Function Characterization of 3D Printed Synthetic Porous Biomaterials for Tissue Engineering. Adv Healthc Mater. 2018 Apr;7(7):e1701095.10.1002/adhm.201701095 ↗
5. Li RQ, McCarthy A, Zhang YS, Xie JW. Decorating 3D Printed Scaffolds with Electrospun Nanofiber Segments for Tissue Engineering. Adv. Biosys. 2019;3(12):1900137.
6. Richards DJ, Tan Y, Jia J, Yao H, Mei Y. 3D Printing for Tissue Engineering. Isr J Chem. 2013 Oct;53(9-10):805–14.10.1002/ijch.201300086 ↗
7. Pearre BW, Michas C, Tsang JM,Gardner TJ, Otchy TM. Fast micron-scale 3D printing with a resonant-scanning two-photon microscope. Addit. Manuf. 2019;30:100887.
8. Kalms M, Narita R, Thomy C, Vollertsen F, Bergmann RB. New approach to evaluate 3D laser printed parts in powder bed fusion-based additive manufacturing in-line within closed space. Addit. Manuf. 2019;26:161–5.
9. Gelber MK, Hurst G, Comi TJ, Bhargava R. Model-guided design and characterization of a high-precision 3D printing process for carbohydrate glass. Addit. Manuf. 2018;22:38–50.
10. Grigoryan B, Paulsen SJ, Corbett DC, Sazer DW, Fortin CL, Zaita AJ, et al. Multivascular networks and functional intravascular topologies within biocompatible hydrogels. Science. 2019 May;364(6439):458–64.10.1126/science.aav9750 ↗
11. Lee A, Hudson AR, Shiwarski DJ, Tashman JW, Hinton TJ, Yerneni S, et al. 3D bioprinting of collagen to rebuild components of the human heart. Science. 2019 Aug;365(6452):482–7.10.1126/science.aav9051 ↗
12. Bose S, Vahabzadeh S, Bandyopadhyay A. Bone tissue engineering using 3D printing. Mater Today. 2013;16(12):496–504.10.1016/j.mattod.2013.11.017 ↗
13. Murphy SV, Atala A. 3D bioprinting of tissues and organs. Nat Biotechnol. 2014 Aug;32(8):773–85.10.1038/nbt.2958 ↗
14. Mannoor MS, Jiang Z, James T, Kong YL, Malatesta KA, Soboyejo WO, et al. 3D printed bionic ears. Nano Lett. 2013 Jun;13(6):2634–9.10.1021/nl4007744 ↗
15. Rai M, dos Santos JC, Soler MF, Marcelino PR, Brumano LP, Ingle AP, et al. Strategic role of nanotechnology for production of bioethanol and biodiesel. Nanotechnol Rev. 2016;5(2):231–50.10.1515/ntrev-2015-0069 ↗
16. Lemée L, Kpogbemabou D, Pinard L, Beauchet R, Laduranty J. Biological pretreatment for production of lignocellulosic biofuel. Bioresour Technol. 2012 Aug;117:234–41.10.1016/j.biortech.2012.04.056 ↗
17. Zhao X, Luo K, Zhang Y, Zheng Z, Cai Y, Wen B, et al. Improving the methane yield of maize straw: focus on the effects of pretreatment with fungi and their secreted enzymes combined with sodium hydroxide. Bioresour Technol. 2018 Feb;250:204–13.10.1016/j.biortech.2017.09.160 ↗
18. Li ZH, Xu K, Pan YS. Recent development of Supercapacitor Electrode Based on Carbon Materials. Nanotechnol Rev. 2019;8(1):35–49.10.1515/ntrev-2019-0004 ↗
19. Gao T, Xu C, Li R, Zhang R, Wang B, Jiang X, et al. Biomass-Derived Carbon Paper to Sandwich Magnetite Anode for Long-Life Li-Ion Battery. ACS Nano. 2019 Oct;13(10):11901–11.10.1021/acsnano.9b05978 ↗
20. Sultan S, Mathew AP. 3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel. Nanoscale. 2018 Mar;10(9):4421–31.10.1039/C7NR08966J ↗
21. Li VC, Kuang X, Hamel CM, Roach D, Deng YL, Qi HJ. Cellulose nanocrystals support material for 3D printing complexly shaped structures via multi-materials-multi-methods printing. Addit. Manuf. 2019;28:14–22.
22. Hausmann MK, Rühs PA, Siqueira G, Läuger J, Zimmermann T, Studart AR. 3D printed cellulose nanocrystal composites through digital light processing. ACS Nano. 2018;12(7):6926–37.10.1021/acsnano.8b02366 ↗
23. Hakansson KM, Henriksson IC, Vazquez CD, Kuzmenko V, Markstedt K, Enoksson P, et al. Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures, Adv. Mater Technol. 2016;1(7):1600096.
24. Xu C, Zhang Molino B, Wang X, Cheng F, Xu W, Molino P, et al. 3D printing of nanocellulose hydrogel scaffolds with tunable mechanical strength towards wound healing application. J Mater Chem B Mater Biol Med. 2018 Nov;6(43):7066–75.10.1039/C8TB01757C ↗
25. Huang L, Du X, Fan S, Yang G, Shao H, Li D, et al. Bacterial cellulose nanofibers promote stress and fidelity of 3D-printed silk based hydrogel scaffold with hierarchical pores. Carbohydr Polym. 2019 Oct;221:146–56.10.1016/j.carbpol.2019.05.080 ↗
26. Giordano RA, Wu BM, Borland SW, Cima LG, Sachs EM, Cima MJ. Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing. J Biomater Sci Polym Ed. 1996;8(1):63–75.10.1163/156856297X00588 ↗
27. Kiendl J, Gao C. Controlling toughness and strength of FDM 3D-printed PLA components through the raster layup, Compos. Pt. B-Eng. 2020;180:107562.
28. Kaygusuz B, Ozerinc S. Improving the ductility of polylactic acid parts produced by fused deposition modeling through polyhydroxyalkanoate additions. J Appl Polym Sci. 2019;136(43):48154.10.1002/app.48154 ↗
29. Tian XY, Liu TF, Wang QR, Dilmurat A, Li DC, Ziegmann G. Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites. J Clean Prod. 2017;142(4):1609–18.10.1016/j.jclepro.2016.11.139 ↗
30. Torrado AR, Shemelya CM, English JD, Lin YR, Wicker RB, Roberson DA. Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing. Addit. Manuf. 2015;6:16–29.
31. Dilberoglu UM, Simsek S, Yaman U. Shrinkage compensation approach proposed for ABS material in FDM process. Mater Manuf Process. 2019;34(9):993–8.10.1080/10426914.2019.1594252 ↗
32. Samykano M, Selvamani SK, Kadirgama K, Ngui WK, Kanagaraj G, Sudhakar K. Mechanical property of FDM printed ABS: influence of printing parameters. Int J Adv Manuf Technol. 2019;102(9-12):2779–96.10.1007/s00170-019-03313-0 ↗
33. Levenhagen NP, Dadmun MD. Improving Interlayer Adhesion in 3D Printing with Surface Segregating Additives: Improving the Isotropy of Acrylonitrile-Butadiene-Styrene Parts. ACS Appl. Polym. Mater. 2019;1(4):876–84.
34. Park SJ, Lee JE, Park JH, Lyu MY, Park K, Koo MS, et al. FDM 3D Printing of Environmental Friendly and High Strength Bio-based PC Filaments for Baby Toys. Elastom. Compos. 2017;52(2):99–104.
35. Yap YL, Toh W, Koneru R, Lin KH, Yeoh KM, Lim CM, et al. A non-destructive experimental-cum-numerical methodology for the characterization of 3D-printed materialspolycarbonate-acrylonitrile butadiene styrene (PC-ABS). Mech Mater. 2019;132:121–33.10.1016/j.mechmat.2019.03.005 ↗
36. Shi Q, Yu K, Kuang X,Mu XM, Dunn CK, Dunn ML, et al. Recyclable 3D printing of vitrimer epoxy. Mater Horiz. 2017;4(4):598–607.10.1039/C7MH00043J ↗
37. Pierson HA, Celik E, Abbott A, De Jarnette H, Gutierrez LS, Johnson K, et al. Mechanical Properties of Printed Epoxy-Carbon Fiber Composites. Exp Mech. 2019;59(6):843–57.10.1007/s11340-019-00498-z ↗
38. Wang X, Jiang M, Zhou ZW, Gou JH, Hui D. 3D printing of polymer matrix composites: A review and prospective, Compos. Pt. B-Eng. 2017;110:442–58.
39. Lei M, Chen Z, Lu HB, Yu K. Recent progress in shape memory polymer composites: methods, properties, applications and prospects. Nanotechnol Rev. 2019;8(1):327–51.10.1515/ntrev-2019-0031 ↗
40. Yang H, Leow WR, Wang T, Wang J, Yu J, He K, et al. 3D Printed Photoresponsive Devices Based on Shape Memory Composites. Adv Mater. 2017 Sep;29(33):1701627.10.1002/adma.201701627 ↗
41. Wu W, Ye W, Wu Z, Geng P, Wang Y, Zhao J. Influence of Layer Thickness, Raster Angle, Deformation Temperature and Recovery Temperature on the Shape-Memory Effect of 3D-Printed Polylactic Acid Samples. Materials (Basel). 2017 Aug;10(8):E970.10.3390/ma10080970 ↗
42. Cao J, Wei W, Gou GJ, Jiang M, Cui YH, Zhang SL, et al. Cellulose films from the aqueous DMSO/TBAH-system. Cellulose. 2018;25(3):1975–86.10.1007/s10570-017-1639-5 ↗
43. Bu D, Hu X, Yang Z, Yang X, WeiW, Jiang M, et al. Elucidation of the Relationship between Intrinsic Viscosity and Molecular Weight of Cellulose Dissolved in Tetra-N-Butyl Ammonium Hydroxide/Dimethyl Sulfoxide. Polymers (Basel). 2019 Oct;11(10):E1605.10.3390/polym11101605 ↗
44. Geng H. A one-step approach to make cellulose-based hydrogels of various transparency and swelling degrees. Carbohydr Polym. 2018 Apr;186:208–16.10.1016/j.carbpol.2018.01.031 ↗