journal article·2022-10-12Open access

Performance and overall evaluation of nano-alumina-modified asphalt mixture

Yangsen Cao, Zhuangzhuang Liu, Wenjia Song

Nanotechnology Reviews· Volume 11· Issue 1

Abstract

Abstract The performance of asphalt mixture affects the service of pavement. Nano-alumina was employed as asphalt mixture modification to improve pavement performances. Properties of asphalt mixtures including high-temperature properties, low-temperature properties, water stability properties, and fatigue properties were investigated through rutting tests, dynamic creep tests, low-temperature bending tests, indirect tensile tests, Marshall stability tests, freeze-thaw splitting tests, and indirect tensile fatigue tests. Considering the various performance of nano-alumina-modified asphalt mixture, the optimization decision was made based on 21 sets of performance data, and the optimal dosage of nano-alumina was further clarified. The results demonstrate that nano-alumina improved all properties of asphalt mixtures, except for low-temperature properties. The decision revealed that the performance of the modified asphalt mixture was the most balanced when the content of nano-alumina is 9%. When the optimal dosage of nano-alumina was 9%, the dynamic stability of the asphalt mixture at 60°C was increased by 34.2%, the cumulative permanent strain was reduced by 36.5–49.5%, the water stability performance was improved by 8.3–19.5%, and the fatigue performance was improved by 3.8–7.2%. However, the low-temperature flexural tensile strain was reduced by 2.1% but still meets the specification requirements. Nano-alumina can be used to modify asphalt pavement materials in high-temperature and rainy areas.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Highway, Chang’an University , Xi’an , 710064, Shaanxi Province , China

Key Laboratory for Special Area Highway Engineering of Ministry of Education, Chang’an University , South 2nd Ring Road Middle Section , Xi’an , 710064, Shaanxi Province , China

Department of Civil Engineering, Institute of Technology, Xi’an International University , Xi’an , 710077, Shaanxi Province , China

References (52)

Show source-provided references
1. Editorial Department of China Journal of Highway and Transport. Review on China’s pavement engineering research·2020. China J Highw Transp. 2020;33(10):1–66.
2. Cao Y, Li J, Sha A, Liu Z, Zhang F, Li X. A power-intensive piezoelectric energy harvester with efficient load utilization for road energy collection: Design, testing, and application. J Clean Prod. 2022;369:133287.10.1016/j.jclepro.2022.133287 ↗
3. Dai J, Ma F, Fu Z, Li C, Jia M, Shi K, et al. Applicability assessment of stearic acid/palmitic acid binary eutectic phase change material in cooling pavement. Renew Energ. 2021;175(5):748–59.10.1016/j.renene.2021.05.063 ↗
4. Behzad B, William B, Henrique R. Evaluation of low-temperature cracking performance of asphalt pavements using acoustic emission: A review. Appl Sci. 2018;8(2):306.10.3390/app8020306 ↗
5. Canestrari F, Ingrassia L. A review of top-down cracking in asphalt pavements: causes, models, experimental tools and future challenges. J Traffic Transp Eng. 2020;7(5):541–72.10.1016/j.jtte.2020.08.002 ↗
6. Chen L, Wang Y, Wang Z, Chang H, Fan F. Diffusion resisting performance of concrete modified with sodium methyl silicate in saline soil area. Constr Build Mater. 2022;350:128767.10.1016/j.conbuildmat.2022.128767 ↗
7. Yuan D, Jiang W, Hou Y, Xiao J, Ling X, Xing C. Fractional derivative viscoelastic response of high-viscosity modified asphalt. Constr Build Mater. 2022;350:128915.10.1016/j.conbuildmat.2022.128915 ↗
8. Giovanni P, Sara F, Filippo M, George S. A review of the fundamentals of polymer-modified asphalts: asphalt/polymer interactions and principles of compatibility. Adv Colloid Interfac. 2015;224:72–112.10.1016/j.cis.2015.07.010 ↗
9. Zhang F, Cao Y, Sha A, Wang W, Song R, Lou B. Mechanism, rheology and self-healing properties of carbon nanotube modified asphalt. Constr Build Mater. 2022;346:128431.10.1016/j.conbuildmat.2022.128431 ↗
10. Du Z, Jiang C, Yuan J, Xiao F, Wang J. Low temperature performance characteristics of polyethylene modified asphalts–A review. Constr Build Mater. 2020;264:120704.10.1016/j.conbuildmat.2020.120704 ↗
11. Cao Y, Sha A, Liu Z, Li J, Jiang W. Energy output of piezoelectric transducers and pavements under simulated traffic load. J Clean Prod. 2021;279:123508.10.1016/j.jclepro.2020.123508 ↗
12. Zakieva R, Gussamov I, Gadel’Shin RM, Petrov S, Ibragimova D, Fakhrutdinov R. Effect of modification of a copolymer of ethylene with vinyl acetate on the performance of cement and asphalt concrete based on it. Chem Tech Fuels Oils. 2015;51(5):480–6.10.1007/s10553-015-0628-3 ↗
13. Ma Y, Wang S, Zhou H, Hu W, Polaczyk P, Huang B. Potential alternative to styrene–butadiene–styrene for asphalt modification using recycled rubber–plastic blends. J Mater Civ Eng. 2021;33(12):04021341.10.1061/(ASCE)MT.1943-5533.0003946 ↗
14. Cao Y, Zhang F, Sha A, Liu Z, Hao Y, Hao Y. Energy conversion models and characteristics under various inner connections of a novel packaged piezoelectric transducer for pavements. Energ Convers Manage. 2021;245:114563.10.1016/j.enconman.2021.114563 ↗
15. Jitsangiam P, Nusit K, Phenrat T, Kumlai S, Pra-ai S. An examination of natural rubber modified asphalt: effects of rubber latex contents based on macro- and micro-observation analyses. Constr Build Mater. 2021;289(12):123158.10.1016/j.conbuildmat.2021.123158 ↗
16. Niu Y, Zhu Z, Xiao J, Liu Z, Liang B. Evaluation of storage stability of styrene–butadiene–styrene block copolymer-modified asphalt via electrochemical analysis. Constr Build Mater. 2016;107:38–43.10.1016/j.conbuildmat.2015.12.174 ↗
17. Babagoli R, Vamegh M, Mirzababaei P. Laboratory evaluation of the effect of SBS and Lucobite on performance properties of bitumen. Pet Sci Technol. 2019;37(3):255–60.10.1080/10916466.2018.1539748 ↗
18. Behnood A, Modiri M. Morphology, rheology, and physical properties of polymer-modified asphalt binders. Eur Polym J. 2019;112:766–91.10.1016/j.eurpolymj.2018.10.049 ↗
19. Li Z, Guo T, Chen Y, Liu Q, Chen Y. The properties of nano-CaCO3/nano-ZnO/SBR composite-modified asphalt. Nanotechnol Rev. 2021;10(1):1253–65.10.1515/ntrev-2021-0082 ↗
20. Lin M, Wang Z, Yang P, Li P. Micro-structure and rheological properties of graphene oxide rubber asphalt. Nanotechnol Rev. 2019;8(1):227–35.10.1515/ntrev-2019-0021 ↗
21. Sun X, Yuan J, Zhang Y, Yin Y, Lv J, Jiang S. Thermal aging behavior characteristics of asphalt binder modified by nano-stabilizer based on DSR and AFM. Nanotechnol Rev. 2021;10(1):1157–82.10.1515/ntrev-2021-0075 ↗
22. Sun X, Zhang Y, Peng Q, Yuan J, Cang Z, Lv J. Study on adaptability of rheological index of nano-PUA-modified asphalt based on geometric parameters of parallel plate. Nanotechnol Rev. 2021;10(1):1801–11.10.1515/ntrev-2021-0106 ↗
23. Wang C, Chen Q, Guo T, Zhang L. Preparation and adsorption properties of nano-graphene oxide/tourmaline composites. Nanotechnol Rev. 2021;10(1):1812–26.10.1515/ntrev-2021-0113 ↗
24. Zheng K, Yu H, Zhao L, Zhu X, Zhang J. Laboratory experiment on the nano-TiO2 photocatalytic degradation effect of road surface oil pollution. Nanotechnol Rev. 2020;9(1):922–33.10.1515/ntrev-2020-0072 ↗
25. Yu J, Li W, Li L. Effects of nano-titanium dioxide on asphalt aging performances. J Chongqing Jiaotong Univ (Nat Sci). 2017;36(10):26–30.
26. Zhang H, Zhu C, Yu J, Shi C, Zhang D. Influence of surface modification on physical and ultraviolet aging resistance of bitumen containing inorganic nanoparticles. Constr Build Mater. 2015;98:735–40.10.1016/j.conbuildmat.2015.08.138 ↗
27. Sun L, Xin X, Ren J. Inorganic nanoparticle-modified asphalt with enhanced performance at high temperature. J Mater Civ Eng. 2017;29(3):04016227.10.1061/(ASCE)MT.1943-5533.0001750 ↗
28. Crucho J, Neves J, Silvino D, Santos L. Mechanical performance of asphalt concrete modified with nanoparticles: nanosilica, zero-valent iron and nanoclay. Constr Build Mater. 2018;181:309–18.10.1016/j.conbuildmat.2018.06.052 ↗
29. Ezzat H, El-Badawy S, Gabr A, Zaki E, Breakah T. Evaluation of asphalt binders modified with nanoclay and nanosilica. Proc Eng. 2016;143:1260–7.10.1016/j.proeng.2016.06.119 ↗
30. Karahancer S. Investigating the performance of cuprous oxide nanoparticle modified asphalt binder and hot mix asphalt. Constr Build Mater. 2019;212:698–706.10.1016/j.conbuildmat.2019.04.041 ↗
31. Hassan Z, Peyman M, Rezvan B. Properties of bituminous mixtures modified with a nano-organosilane additive. Pet Sci Technol. 2016;34(4):386–93.10.1080/10916466.2015.1136948 ↗
32. Peyman M. Effect of zycotherm on moisture susceptibility of Warm Mix Asphalt mixtures prepared with different aggregate types and gradations. Constr Build Mater. 2016;116:403–12.10.1016/j.conbuildmat.2016.04.143 ↗
33. Peyman M, Fereidoon M, Koorosh N. Effect of liquid silane-based anti-stripping additives on rheological properties of asphalt binder and hot mix asphalt moisture sensitivity. Road Mater Pavement. 2020;21(2):1–16.
34. Peyman M, Fereidoon M, Vahid V. Investigation of rutting performance of asphalt binders containing warm additive. Pet Sci Technol. 2017;35(1):79–85.10.1080/10916466.2016.1247173 ↗
35. Shafabakhsh G, Ani O. Experimental investigation of effect of nano TiO2/SiO2 modified bitumen on the rutting and fatigue performance of asphalt mixtures containing steel slag aggregates. Constr Build Mater. 2015;98:692–702.10.1016/j.conbuildmat.2015.08.083 ↗
36. Shafabakhsh G, Rajabi M, Sahaf A. The fatigue behavior of SBS/nanosilica composite modified asphalt binder and mixture. Constr Build Mater. 2019;229:116796.10.1016/j.conbuildmat.2019.116796 ↗
37. Golestani B, Nam B, Nejad F, Fallah S. Nanoclay application to asphalt concrete: characterization of polymer and linear nanocomposite-modified asphalt binder and mixture. Constr Build Mater. 2015;91:32–8.10.1016/j.conbuildmat.2015.05.019 ↗
38. Zhou J, Zheng K, Liu Z, He F. Chemical effect of nano-alumina on early-age hydration of portland cement. Cem Concr Res. 2019;116:159–67.10.1016/j.cemconres.2018.11.007 ↗
39. Orakzai M. Hybrid effect of nano-alumina and nano-titanium dioxide on mechanical properties of concrete. Case Stud Constr Mat. 2021;14(4):e00483.10.1016/j.cscm.2020.e00483 ↗
40. Jo B, Chakraborty S, Kim H. Prediction of the curing time to achieve maturity of the nano cement based concrete using the Weibull distribution model. Constr Build Mater. 2015;84:307–14.10.1016/j.conbuildmat.2015.03.037 ↗
41. Ministry of Transport of the People’s Republic of China. Technical specification for construction of highway asphalt pavements; 2004.
42. Tian X, Zhang R, Yang Z, Chu Y, Xu Y, Zhang Q. Multiscale study on the effect of nano-organic montmorillonite on the performance of rubber asphalt. J Nanomater. 2018;2018(1):1–10.10.1155/2018/9638603 ↗
43. Sun J. Experimental study on properties of SiC Nano-modified asphalt and its mixtures [dissertation]. Changsha: Changsha University of Science & Technology; 2017.
44. Chen Q, Wang C, Yu S, Song Z, Fu H, An T. Low-temperature mechanical properties of polyurethane-modified waterborne epoxy resin for pavement coating. Int J Pavement Eng. 2022;1–13.10.1080/10298436.2022.2099853 ↗
45. Wang C, Wang M, Chen Q, Zhang L. Basic performance and asphalt smoke absorption effect of environment-friendly asphalt to improve pavement construction environment. J Clean Prod. 2022;333:130142.10.1016/j.jclepro.2021.130142 ↗
46. Jeffry S, Jaya R, Hassan N, Yaacob H, Al-Saffar Z. The influence of nano-carbon from coconut shell ash as modifier on the properties of bitumen. Road Mater Pavement. 2022;23(4):770–86.10.1080/14680629.2020.1809502 ↗
47. Taherkhani H, Afroozi S, Javanmard S. Comparative study of the effects of nanosilica and zyco-soil nanomaterials on the properties of asphalt concrete. J Mater Civ Eng. 2017;29(8):04017054.10.1061/(ASCE)MT.1943-5533.0001889 ↗
48. Norhidayah A, Ismail C, Al-Saffar Z, Ramadhansyah P, Masri K, Muzamir H, et al. The influence of nano kaolin clay as alternative binder on the penetration properties. IOP Conference Series: Earth and Environmental Science. 2021;682(1):012063.10.1088/1755-1315/682/1/012063 ↗
49. Zali N, Masri K, Jaya R, Al Bakri Abdullah M, Hasan M, Hasan M, et al. Properties of stone mastic asphalt incorporating nano titanium as binder’s modifier. Arch Civ Eng. 2022;68(1):653–66.10.24425/ace.2022.140192 ↗
50. Chen Y, Chen A, Li C, Li Z. Analysis of performance for nano-ZnO modified asphalt mixture. China J Highw Transp. 2017;30(7):25–32.
51. Lv S, Liu C, Qu F, Zheng J. Test methods and characterization of fatigue performance of asphalt mixtures: A review. China J Highw Transp. 2020;33(10):67–75.
52. Sun P, Zhang H, Guo G, Niu D. Pavement performance of nano-composite modified asphalt mixture. J Build Mater. 2016;19(4):672–7.