journal article·2021-10-13Open access

Physical, thermal, and mechanical properties of highly porous polylactic acid/cellulose nanofibre scaffolds prepared by salt leaching technique

Revati Radakisnin, Mohd Shukry Abdul Majid, Mohd Ridzuan Mohd Jamir, Mohd Faizal Mat Tahir, Cheng Ee Meng, Hassan Al Alshahrani

Nanotechnology Reviews· Volume 10· Issue 1

Abstract

Abstract This study aimed to prepare and characterise polylactic acid (PLA) reinforced with cellulose nanofibre (CNF) from a Pennisetum purpureum -based composite scaffold and determine its structural and mechanical properties. Porous scaffolds with CNF compositions of 5‒20 wt% in the PLA matrix were developed using solvent casting and particulate leaching of its porogen at 90 wt% of loadings. Morphology studies using field emission scanning electron microscopy revealed that the scaffolds had well-interconnected pores with an average pore size range of 67‒137 µm and porosity >76%. X-ray diffraction confirmed the interconnectivity and homogeneity of the pores and the fibrous structure of the scaffolds. The compressive strength of the fabricated scaffolds varied between 2.34 and 6.66 MPa, while their compressive modulus was between 1.95 and 6.04 MPa for various CNF contents. Furthermore, water absorption and thermal degradation studies showed that the scaffold had good hydrophilicity and improved thermal stability. These findings highlight the need to modify the pore structure and mechanical performance simultaneously for tissue engineering. Thus, this study concludes that the developed PLA scaffolds reinforced with CNF from Pennisetum purpureum are potential candidates for cell attachment and extracellular matrix generation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications · Advanced Cellulose Research Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Mechanical Engineering Technology, Universiti Malaysia Perlis (UniMAP), Pauh Putra Campus , Arau 02600 , Perlis , Malaysia

Faculty of Electronic Engineering Technology, Universiti Malaysia Perlis (UniMAP), Pauh Putra Campus , Arau 02600 , Perlis , Malaysia

Center for Integrated Design of Advanced Mechanical Systems (PRISMA), Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia , Bandar Baru Bangi 43600 , Selangor , Malaysia

Department of Mechanical Engineering, Najran University , King AbdulAziz Road, PO Box 1988 , Najran , Saudi Arabia

References (68)

Show source-provided references
1. Pei B, Wang W, Fan Y, Wang X, Watari F, Li X. Fiber-reinforced scaffolds in soft tissue engineering. Regen Biomater. 2017;4(4):257–68.10.1093/rb/rbx021 ↗
2. Yuksel E, Choo J, Wettergreen M, Liebschner M. Challenges in soft tissue engineering. Semin Plast Surg. 2005;19(3):261–70.10.1055/s-2005-919721 ↗
3. Chakrabarty A, Teramoto Y. Recent advances in nanocellulose composites with polymers: a guide for choosing partners and how to incorporate them. Polym (Basel). 2018;10(5):517.10.3390/polym10050517 ↗
4. Asim M. Nanocellulose: preparation methods and applications. In: Cellulose-reinforced nanofibre composites. Sawston, UK: Woodhead Publishing; 2017. p. 261–76.10.1016/B978-0-08-100957-4.00011-5 ↗
5. Kargarzadeh H, Ioelovich M, Ahmad I, Thomas S, Dufresne A. Methods for extraction of nanocellulose from various sources. Handbook of Nanocellulose and Cellulose Nanocomposites. Weinheim, Germany: Wiley-VCH; 2017. p. 1–49.10.1002/9783527689972.ch1 ↗
6. Shak KPY, Pang YL, Mah SK. Nanocellulose: recent advances and its prospects in environmental remediation. Beilstein J Nanotechnol. 2018;9(1):2479–98.10.3762/bjnano.9.232 ↗
7. Kian LK, Saba N, Jawaid M, Sultan MTH. A review on processing techniques of bast fibers nanocellulose and its polylactic acid (PLA) nanocomposites. Int J Biol Macromol. 2019;121:1314–28.10.1016/j.ijbiomac.2018.09.040 ↗
8. Hickey RJ, Pelling AE. Cellulose biomaterials for tissue engineering. Front Bioeng Biotechnol. March 2019;7:1–15.10.3389/fbioe.2019.00045 ↗
9. Reddy KO, Maheswari CU, Shukla M, Rajulu AV. Chemical composition and structural characterisation of Napier grass fibers. Mater Lett. 2012;67(1):35–8.10.1016/j.matlet.2011.09.027 ↗
10. Haameem MJA, Majid MSA, Afendi M, Marzuki HFA, Fahmi I, Gibson AG. Mechanical properties of Napier grass fibre/polyester composites. Compos Struct. 2016;136:1–10.10.1016/j.compstruct.2015.09.051 ↗
11. Indira Devi MP, Nallamuthu N, Rajini N, Varada Rajulu A, Hari Ram N, Siengchin S. Cellulose hybrid nanocomposites using Napier grass fibers with in situ generated silver nanoparticles as fillers for antibacterial applications. Int J Biol Macromol. 2018;118:99–106.10.1016/j.ijbiomac.2018.06.019 ↗
12. Ridzuan MJM, Abdul Majid MS, Afendi M, Aqmariah Kanafiah SN, Zahri JM, Gibson AG. Characterisation of natural cellulosic fibre from Pennisetum purpureum stem as potential reinforcement of polymer composites. Mater Des. Jan. 2016;89:839–47.10.1016/j.matdes.2015.10.052 ↗
13. De Araújo Morandim-Giannetti A, Albuquerque TS, De Carvalho RKC, Araújo RMS, Magnabosco R. Study of ‘Napier grass’ delignification for production of cellulosic derivatives. Carbohydr Polym. 2013;92(1):849–55.10.1016/j.carbpol.2012.09.095 ↗
14. Bacakova L, Pajorova J, Bacakova M, Skogberg A, Kallio P, Kolarova K, et al. Versatile application of nanocellulose: from industry to skin tissue engineering and wound healing. Nanomaterials. 2019;9(2):164.10.3390/nano9020164 ↗
15. Jorfi M, Foster EJ. Recent advances in nanocellulose for biomedical applications. J Appl Polym Sci. 2015;132(14):1–19.10.1002/app.41719 ↗
16. Radakisnin R, Majid MSA, Jamir MRM, Jawaid M, Sultan MTH, Tahir MFM. Structural, morphological and thermal properties of cellulose nanofibers from Napier fiber (Pennisetum purpureum). Mater (Basel). 2020;13(18):4125.10.3390/ma13184125 ↗
17. Jian W, Hui D, Lau D. Nanoengineering in biomedicine: current development and future perspectives. Nanotechnol Rev. 2020;9(1):700–15.10.1515/ntrev-2020-0053 ↗
18. Madhavan Nampoothiri K, Nair NR, John RP. An overview of the recent developments in polylactide (PLA) research. Bioresour Technol. 2010;101:8493–501.10.1016/j.biortech.2010.05.092 ↗
19. Dai W, Yang Y, Yang Y, Liu W. Material advancement in tissue-engineered nerve conduit. Nanotechnol Rev. 2021;10(1):488–503.10.1515/ntrev-2021-0028 ↗
20. Oksman K, Skrifvars M, Selin J-F. Natural fibres as reinforcement in polylactic acid (PLA) composites. Compos Sci Technol. 2003;63(9):1317–24.10.1016/S0266-3538(03)00103-9 ↗
21. Xiao L, Wang B, Yang G, Gauthier M. Poly(Lactic Acid)-based biomaterials: synthesis, modification and applications. Biomed Sci Eng Technol. 2006;11:247–82.
22. Lopes MS, Jardini AL, Filho RM. Poly (lactic acid) production for tissue engineering applications. Procedia Eng. 2012;42:1402–13.10.1016/j.proeng.2012.07.534 ↗
23. Grémare A, Guduric V, Bareille R, Heroguez V, Latour S, L’heureux N, et al. Characterization of printed PLA scaffolds for bone tissue engineering. J Biomed Mater Res A. 2018;106(4):887–94.10.1002/jbm.a.36289 ↗
24. Donate R, Monzón M, Alemán-Domínguez ME, Ortega Z. Enzymatic degradation study of PLA-based composite scaffolds. Rev Adv Mater Sci. 2020;59(1):170–5.10.1515/rams-2020-0005 ↗
25. Navarro M. 3D printed PLA-based scaffolds. Organogenesis. 2013;9(4):239–44.10.4161/org.26048 ↗
26. Dave HK, Rajpurohit SR, Patadiya NH, Dave SJ, Sharma KS, Thambad SS, et al. Compressive strength of PLA based scaffolds: effect of layer height, infill density and print speed. Int J Mod Manuf Technol. 2019;11(1):21–7.
27. Peng Z, Tang P, Zhao L, Wu L, Xu X, Lei H, et al. Advances in biomaterials for adipose tissue reconstruction in plastic surgery. Nanotechnol Rev. 2020;9(1):385–95.10.1515/ntrev-2020-0028 ↗
28. Chanda S, Bajwa DS. A review of current physical techniques for dispersion of cellulose nanomaterials in polymer matrices. Rev Adv Mater Sci. 2021;60(1):325–41.10.1515/rams-2021-0023 ↗
29. Massai D, Pennella F, Gentile P, Gallo D, Ciardelli G, Bignardi C, et al. Image-based three-dimensional analysis to characterise the texture of porous scaffolds. Biomed Res Int. 2014;2014:161437.10.1155/2014/161437 ↗
30. Tairov EA. Method of measuring void fraction in a channel with porous media. Thermophys Aeromechanics. 2020;27(2):313–6.10.1134/S0869864320020134 ↗
31. Choudhury M, Mohanty S, Nayak S. Effect of different solvents in solvent casting of porous PLA scaffolds – in biomedical and tissue engineering applications. J Tissue Sci Eng. 2014;6(1):1–7.10.1166/jbt.2015.1243 ↗
32. ASTM D695-96, Standard Test Method for Compressive Properies of Rigid Plastics, ASTM International, West Conshohocken, PA, 2021.
33. Doulabi AH, Mequanint K, Mohammadi H. Blends and nanocomposite biomaterials for articular cartilage tissue engineering. Mater (Basel). 2014;7(7):5327–55.10.3390/ma7075327 ↗
34. Zhang Z, Cui H. Biodegradability and biocompatibility study of poly(chitosan-g-lactic acid) scaffolds. Molecules. 2012;17:3243–58.10.3390/molecules17033243 ↗
35. Cai S, Wu C, Yang W, Liang W, Yu H, Liu L. Recent advance in surface modification for regulating cell adhesion and behaviors. Nanotechnol Rev. 2020;9(1):971–89.10.1515/ntrev-2020-0076 ↗
36. Naseri N, Lenart G, Kristiina O. 3-Dimensional porous nanocomposite scaffolds based on cellulose nanofibers for cartilage tissue engineering: tailoring of porosity and mechanical performance. R Soc Chem. 2016;6:5999–6007.10.1039/C5RA27246G ↗
37. Hagen R. Basics of PLA. Bioplastics Mag. 2005;4:38–40.
38. Chung HJ, Park TG. Surface engineered and drug releasing pre-fabricated scaffolds for tissue engineering. Adv Drug Deliv Rev. 2007;59:249–62.10.1016/j.addr.2007.03.015 ↗
39. Bartis D, Pongrácz J. Three dimensional tissue cultures and tissue engineering. In: Teaching Materials: Medical Biotechnology Master’s Program. Debrecen: University of Pécs; 2011. p. 15.
40. Loh QL, Choong C. Three-dimensional scaffolds for tissue engineering applications: role of porosity and pore size. Tissue Eng B Rev. 2013;19(6):485–502.10.1089/ten.teb.2012.0437 ↗
41. Bartoš M, Suchý T, Foltán R. Note on the use of different approaches to determine the pore sizes of tissue engineering scaffolds: what do we measure? Biomed Eng Online. 2018;17(1):1–15.10.1186/s12938-018-0543-z ↗
42. Chen G, Ushida T, Tateishi T. Development of biodegradable porous scaffolds for tissue engineering. Mater Sci Eng C. 2001;17(1):63–9.10.1016/S0928-4931(01)00338-1 ↗
43. Ma PX. Scaffolds for tissue fabrication. Mater Today. 2004;7:30–40.10.1016/S1369-7021(04)00233-0 ↗
44. Razak SIA, Sharif NFA, Rahman WAA. Biodegradable polymers and their bone applications: a review. Int J Basic Appl Sci. 2012;12:31–49.10.1533/9780857097149.31 ↗
45. Lien SM, Ko LY, Huang TJ. Effect of pore size on ECM secretion and cell growth in gelatin scaffold for articular cartilage tissue engineering. Acta Biomater. 2009;5(2):670–9.10.1016/j.actbio.2008.09.020 ↗
46. Ma H, Su W, Tai Z, Sun D, Yan X, Liu B, et al. Preparation and cytocompatibility of polylactic acid/hydroxyapatite/graphene oxide nanocomposite fibrous membrane. Chin Sci Bull. 2012;57(23):3051–8.10.1007/s11434-012-5336-3 ↗
47. Niu X, Feng Q, Wang M, Guo X, Zheng Q. In vitro degradation and release behavior of porous poly(lactic acid) scaffolds containing chitosan microspheres as a carrier for BMP-2-derived synthetic peptide. Polym Degrad Stab. 2009;94(2):176–82.10.1016/j.polymdegradstab.2008.11.008 ↗
48. Tang D, Tare RS, Yang LY, Williams DF, Ou KL, Oreffo ROC. Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration. Biomaterials. 01-Mar-2016;83:363–82.10.1016/j.biomaterials.2016.01.024 ↗
49. Loh QL, Choong C. Three-dimensional scaffolds for tissue engineering applications: Role of porosity and pore size. Tissue Eng B Rev. 2013;19(6):485–502.10.1089/ten.teb.2012.0437 ↗
50. Sehaqui H, Zhou Q, Berglund LA. High-porosity aerogels of high specific surface area prepared from nanofibrillated cellulose (NFC). Compos Sci Technol. Sep. 2011;71(13):1593–9.10.1016/j.compscitech.2011.07.003 ↗
51. Sehaqui H, Salajková M, Zhou Q, Berglund LA. Mechanical performance tailoring of tough ultra-high porosity foams prepared from cellulose i nanofiber suspensions. Soft Matter. Apr. 2010;6(8):1824–32.10.1039/b927505c ↗
52. Ploypetchara N, Suppakul P, Atong D, Pechyen C. Blend of polypropylene/poly(lactic acid) for medical packaging application: physicochemical, thermal, mechanical, and barrier properties. Energy Procedia. 2014;56:201–10.10.1016/j.egypro.2014.07.150 ↗
53. Bulota M, Budtova T. PLA/algae composites: Morphology and mechanical properties. Compos Part A Appl Sci Manuf. 2015;73:109–15.10.1016/j.compositesa.2015.03.001 ↗
54. Shokrolahi F, Mirzadeh H, Yeganeh H, Daliri M. Fabrication of poly(urethane urea)-based scaffolds for bone tissue engineering by a combined strategy of using compression moulding and particulate leaching methods. Iran Polym J. Jan. 2011;20(8):645–58.
55. Chen G, Ushida T, Tateishi T. Scaffold design for tissue engineering. Macromol Biosci. 2002;2(2):67–77. Wiley Online Library. [Online]. Available: https://onlinelibrary.wiley.com/doi/abs/10.1002/1616-5195%2820020201%292%3A2%3C67%3A%3AAID-MABI67%3E3.0.CO%3B2-F [Accessed: 10-Jun-2021].
56. Lee SH, Teramoto Y, Endo T. Cellulose nanofiber-reinforced polycaprolactone/polypropylene hybrid nanocomposite. Compos Part A Appl Sci Manuf. Feb. 2011;42(2):151–6.10.1016/j.compositesa.2010.10.014 ↗
57. Xiong R, Hameed N, Guo Q. Cellulose/polycaprolactone blends regenerated from ionic liquid 1-butyl-3-methylimidazolium chloride. Carbohydr Polym. Sep. 2012;90(1):575–82.10.1016/j.carbpol.2012.05.080 ↗
58. Cheung HY, Lau KT, Tao XM, Hui D. A potential material for tissue engineering: Silkworm silk/PLA biocomposite. Compos Part B Eng. 2008;39:1026–33.10.1016/j.compositesb.2007.11.009 ↗
59. Tohamy KM, Mabrouk M, Soliman IE, Beherei HH, Aboelnasr MA. Novel alginate/hydroxyethyl cellulose/hydroxyapatite composite scaffold for bone regeneration: In vitro cell viability and proliferation of human mesenchymal stem cells. Int J Biol Macromol. January 2018;112:448–60.10.1016/j.ijbiomac.2018.01.181 ↗
60. Maslinda AB, Abdul Majid MS, Ridzuan MJM, Afendi M, Gibson AG. Effect of water absorption on the mechanical properties of hybrid interwoven cellulosic-cellulosic fibre reinforced epoxy composites. Compos Struct. 2017;167:227–37.10.1016/j.compstruct.2017.02.023 ↗
61. Ilyas RA, Sapuan SM, Ishak MR, Zainudin ES. Development and characterisation of sugar palm nanocrystalline cellulose-reinforced sugar palm starch bionanocomposites. Carbohydr Polym. August 2018;202:186–202.10.1016/j.carbpol.2018.09.002 ↗
62. Raia NR, McGill M, Marcet T, Vidal Yucha SE, Kaplan DL. Soft tissue engineering. Biomaterials Science. Amsterdam, Netherlands: Elsevier; 2020. p. 1399–414.10.1016/B978-0-12-816137-1.00087-8 ↗
63. Kaushik A, Singh M, Verma G. Green nanocomposites based on thermoplastic starch and steam exploded cellulose nanofibrils from wheat straw. Carbohydr Polym. 2010;82(2):337–45.10.1016/j.carbpol.2010.04.063 ↗
64. Nasri-Nasrabadi B, Mehrasa M, Rafienia M, Bonakdar S, Behzad T, Gavanji S. Porous starch/cellulose nanofibers composite prepared by salt leaching technique for tissue engineering. Carbohydr Polym. Aug. 2014;108(1):232–8.10.1016/j.carbpol.2014.02.075 ↗
65. Shuai C, Yang B, Peng S, Li Z. Development of composite porous scaffolds based on poly(lactide-co- glycolide)/nano-hydroxyapatite via selective laser sintering. Int J Adv Manuf Technol. Oct. 2013;69(1–4):51–7.10.1007/s00170-013-5001-2 ↗
66. Revati R, Abdul Majid MS, Ridzuan MJM, Normahira M, Mohd Nasir NF, Rahman Y MN, et al. Mechanical, thermal and morphological characterisation of 3D porous Pennisetum purpureum/PLA biocomposites scaffold. Mater Sci Eng C. 2017;75:752–9.10.1016/j.msec.2017.02.127 ↗
67. Sheng L, Jiang R, Zhu Y, Ji Y. Electrospun cellulose nanocrystals/polycaprolactone nanocomposite fiber mats. J Macromol Sci Part B Phys. May 2014;53(5):820–8.10.1080/00222348.2013.861311 ↗
68. Weaver JCJK. Cancellous bone: Its strength and changes with aging and an evaluation of some methods for measuring its mineral content. J Bone Jt Surg. 1966;48A:289–9.10.2106/00004623-196648020-00007 ↗