Temperature dependence of hardness prediction for high-temperature structural ceramics and their composites
Source abstract
Abstract
Abstract Hardness is one of the important mechanical properties of high-temperature structural ceramics and their composites. In spite of the extensive use of the materials in high-temperature applications, there are few theoretical models for analyzing their temperature-dependent hardness. To fill this gap in the available literature, this work is focused on developing novel theoretical models for the temperature dependence of the hardness of the ceramics and their composites. The proposed model is just expressed in terms of some basic material parameters including Young’s modulus, melting points, and critical damage size corresponding to plastic deformation, which has no fitting parameters, thereby being simple for materials scientists and engineers to use in the material design. The model predictions for the temperature dependence of hardness of some oxide ceramics, non-oxide ceramics, ceramic–ceramic composites, diamond–ceramic composites, and ceramic-based cermet are presented, and excellent agreements with the experimental measurements are shown. Compared with the experimental measurements, the developed model can effectively save the cost when applied in the material design, which could be used to predict at any targeted temperature. Furthermore, the models could be used to determine the underlying control mechanisms of the temperature dependence of the hardness of the materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science, Chongqing Key Laboratory of Nano-Micro Composite Materials and Devices, School of Metallurgy and Materials Engineering, Chongqing University of Science and Technology , Chongqing 401331 , China
Department of Mechanics, School of Civil Engineering and Architecture, Chongqing University of Science and Technology , Chongqing 401331 , China
Department of Engineering Mechanics, College of Aerospace Engineering, Chongqing University , Chongqing 400030 , China
References (31)
Show source-provided references
1. Katz RN. High-temperature structural ceramics. Science. 1980;208:841–7.10.1126/science.208.4446.841 ↗
2. Raj R. Fundamental research in structural ceramics for service near 2000°C. J Am Ceram Soc. 1993;76:2147–74.10.1111/j.1151-2916.1993.tb07750.x ↗
3. Yu Z, Lv X, Mao K, Yang Y, Liu A. Role of in-situ formed free carbon on electromagnetic absorption properties of polymer-derived SiC ceramics. J Adv Ceram. 2020;9:617–28.10.1007/s40145-020-0401-x ↗
4. Wu Q, Miao W, Zhang Y, Gao H, Hui D. Mechanical properties of nanomaterials: a review. Nanotechnol Rev. 2020;9:259–73.10.1515/ntrev-2020-0021 ↗
5. Neuman E, Hilmas G, Fahrenholtz W. Mechanical behavior of zirconium diboride–silicon carbide–boron carbide ceramics up to 2200°C. J Eur Ceram Soc. 2015;35:463–76.10.1016/j.jeurceramsoc.2014.09.021 ↗
6. Wang R, Li W, Ji B, Fang D. Fracture strength of the particulate-reinforced ultra-high temperature ceramics based on a temperature dependent fracture toughness model. J Mech Phys Solids. 2017;107:365–78.10.1016/j.jmps.2017.07.012 ↗
7. Skrzypczak M, Guerret-Piecourt C, Bec S, Loubet JL, Guerret O. Use of a nanoindentation fatigue test to characterize the ductile-brittle transition. J Eur Ceram Soc. 2009;29:1021–8.10.1016/j.jeurceramsoc.2008.07.066 ↗
8. Wang R, Li D, Wang X, Li W. Temperature dependent fracture toughness of the particulate-reinforced ultra-high-temperature-ceramics considering effects of change in critical flaw size and plastic power. Compos Part B-Eng. 2019;158:28–33.10.1016/j.compositesb.2018.09.049 ↗
9. Herrmann M, Matthey B, Höhn S, Kinski I, Rafaja D, Michaelis A. Diamond-ceramics composites — new materials for a wide range of challenging applications. J Eur Ceram Soc. 2012;32:1915–23.10.1016/j.jeurceramsoc.2011.11.005 ↗
10. Zhou X, Jing L, Kwon YD, Kim JY, Huang Z, Yoon DH, et al. Fabrication of SiCw/Ti3SiC2 composites with improved thermal conductivity and mechanical properties using spark plasma sintering. J Adv Ceram. 2020;9:462–70.10.1007/s40145-020-0389-2 ↗
11. Wang HL, Hon MH. Temperature dependence of ceramics hardness. Ceram Int. 1999;25:267–71.10.1016/S0272-8842(98)00035-2 ↗
12. Gibson JSK-L, Gonzalez-Julian J, Krishnan S, Vaßen R, Korte-Kerzel S. Mechanical characterisation of the protective Al2O3 scale in Cr2AlC MAX phases. J Eur Ceram Soc. 2019;39:5149–55.10.1016/j.jeurceramsoc.2019.07.045 ↗
13. Niihara K, Nakahira A, Uchiyama T, Hirai T. High-temperature mechanical properties of Al2O3-SiC composites. In Bradt RC, Evans AG, Hasselman DPH, et al., editors. Fracture Mechanics of Ceramics. Boston: Springer; 1986. p. 103–6.10.1007/978-1-4615-7023-3_8 ↗
14. Cygan S, Jaworska L, Putyra P, Ratuszek W, Cyboron J, Klimczyk P. Thermal stability and coefficient of friction of the diamond composites with the titanium compound bonding phase. J Mater Eng Perform. 2017;26:2593–8.10.1007/s11665-017-2712-9 ↗
15. Milman YV, Chugunova SI, Goncharova IV, Chudoba T, Lojkowski W, Gooch W, et al. Temperature dependence of hardness in silicon–carbide ceramics with different porosity. Int J Refract Met H. 1999;17:361–8.10.1016/S0263-4368(99)00022-0 ↗
16. Zunega JCP. High temperature Indentation of WC/CO Hardmetals. Ph.D. Thesis. Southampton, the United Kingdom: University of Southampton; 2013.
17. Wang R, Wang X, Li D, Li W. A novel temperature-dependent hardness model for high-temperature structural ceramics. Ceram Int. 2021;47:1462–5.10.1016/j.ceramint.2020.08.128 ↗
18. Rhee YW, Kim HW, Deng Y, Lawn BR. Brittle fracture versus quasi plasticity in ceramics: a simple predictive index. J Am Ceram Soc. 2001;84:561–5.10.1111/j.1151-2916.2001.tb00698.x ↗
19. Li C, Wang R, Wang X, Li D, Li W. A novel temperature-dependent yield stress model for ceramic materials under indentation. Ceram Int. 2020;46:9943–6.10.1016/j.ceramint.2019.12.109 ↗
20. Li W, Zhang X, Kou H, Wang R, Fang D. Theoretical prediction of temperature dependent yield strength for metallic materials. Int J Mech Sci. 2016;105:273–8.10.1016/j.ijmecsci.2015.11.017 ↗
21. Ye DL. Practical handbook of thermodynamic data for inorganic compounds. Beijing, China: Metallurgical Industry Publishing House; 1981.
22. Ohnishi H, Kawanami T, Nakahira A, Niihara K. Microstructure and mechanical properties of mullite ceramics. J Ceram Soc Jpn. 1990;98:541–7.10.2109/jcersj.98.541 ↗
23. Information on https://www.anton-paar.com/cn-cn/products/applications/review-of-indenter-materials-for-high-temperature-nanoindentation/.
24. Barsoum MW. The MN+1AXN phases: a new class of solids: Thermodynamically stable nanolaminates. Prog Solid St Chem. 2000;28:201–81.10.1016/S0079-6786(00)00006-6 ↗
25. Wolfenden A. Measurement and analysis of elastic and anelastic properties of alumina and silicon carbide. J Mater Sci. 1997;32:2275–82.10.1023/A:1018524200517 ↗
26. Zamora V, Sánchez-González E, Ortiz AL, Miranda P, Guiberteau F. Hertzian indentation of a ZrB2–30% SiC ultra-high-temperature ceramic up to 800°C in air. J Am Ceram Soc. 2010;93:1848–51.10.1111/j.1551-2916.2010.03631.x ↗
27. Rodríguez-Sánchez J, Sánchez-González E, Guiberteau F, Ortiz AL. Contact-mechanical properties at intermediate temperatures of ZrB2 ultra-high-temperature ceramics pressureless sintered with Mo, Ta, or Zr disilicides. J Eur Ceram Soc. 2015;35:3179–85.10.1016/j.jeurceramsoc.2015.04.023 ↗
28. Seino Y, Nagai S. Temperature dependence of the Young’s modulus of diamond thin film prepared by microwave plasma chemical vapour deposition. J Mater Sci. 1993;12:324–5.10.1007/BF01910092 ↗
29. Hannink RHJ, Murray MJ. Elastic moduli measurements of some cubic transition metal carbides and alloyed carbides. J Mater Sci. 1974;9:223–8.10.1007/BF00550945 ↗
30. Xiang H, Feng Z, Li Z, Zhou Y. Temperature-dependence of structural and mechanical properties of TiB2: a first principle investigation. J Appl Phys. 2015;117:225902.10.1063/1.4922408 ↗
31. Teppernegg T, Klünsner T, Kremsner C, Tritremmel C, Czettl C, Puchegger S, et al. High temperature mechanical properties of WC–Co hard metals. Int J Refract Met H. 2016;56:139–44.10.1016/j.ijrmhm.2016.01.002 ↗