journal article·2022-03-11Open access

Effect of 3-mercapto-1-propane sulfonate sulfonic acid and polyvinylpyrrolidone on the growth of cobalt pillar by electrodeposition

Xiuren Ni, Chong Wang, Yuanzhang Su, Yuyao Luo, Yilin Ye, Xinhong Su, Wei He, Shouxu Wang, Yan Hong, Yuanming Chen, Guoyun Zhou, Bingyun Liu

Nanotechnology Reviews· Volume 11· Issue 1

Abstract

Abstract Cobalt is a promising material for electronic interconnections in the post-Moore law period. However, the vertical cobalt pillar is not fully compatible with the current electroplating-involved manufacturing process due to hydrogen evolution at the cathode and poor throwing power of the products. In this article, electrodeposition with multiple organic additives was employed to realize the fabrication of cobalt pillars. Electrochemical measurements were used to investigate the depolarization of 3-mercapto-1-propane sulfonate sulfonic acid (MPS) and the polarization of the polyvinylpyrrolidone (PVP) during cobalt electrodeposition. Notably, the competitive adsorption between MPS and PVP was verified and discussed in cobalt electrodeposition. In order to understand the adsorption and functional groups of the additives, quantum chemical calculations were performed to simulate the distribution of electrostatic potential and molecular orbital energy of the additives. Accordingly, the thiol group of MPS and the amide group of PVP were speculated to be the molecular adsorption sites in cobalt electrodeposition. The mechanism including three stages was proposed for cobalt pillar electrodeposition in solution with MPS and PVP. The electrodeposition of practical cobalt pillars with a depth of 50 µm and diameters of 60, 80, and 100 µm was successfully achieved by electroplating experiments, thereby promoting the application of metal cobalt for electronic packaging.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials and Energy, University of Electronic Science and Technology of China , Chengdu 611731 , China

Zhuhai Founder Sci-Tech High-density Electronics Co., Ltd and Zhuhai Founder Sci-Tech Multilayer Circuit Board Co., Ltd , Zhuhai 519175 , China

Guangdong Key Laboratory of Enterprises on Electronic Chemicals, Guangdong Guanghua Tech. Co. Ltd , 515063 , China

References (47)

Show source-provided references
1. Hao HL, Hui D, Lau D. Material advancement in technological development for the 5G wireless communications. Nanotechnol Rev. 2020;9(1):683–99.10.1515/ntrev-2020-0054 ↗
2. Shang ZW, Hsu HH, Zheng ZW, Cheng CH. Progress and challenges in p-type oxide-based thin film transistors. Nanotechnol Rev. 2019;8(1):422–43.10.1515/ntrev-2019-0038 ↗
3. Gall D. Electron mean free path in elemental metals. J Appl Phys. 2016;119(8):1–5.10.1063/1.4942216 ↗
4. Huang Q, Lyons TW, Sides WD. Electrodeposition of cobalt for interconnect application: effect of dimethylglyoxime. J Electrochem Soc. 2016;163(13):D715–21.10.1149/2.1111613jes ↗
5. Steinhögl W, Schindler G, Steinlesberger G, Engelhardt M. Size-dependent resistivity of metallic wires in the mesoscopic range. Phys Rev B. 2002;66(7):075414.10.1103/PhysRevB.66.075414 ↗
6. Shin H-AS, Kim B-J, Kim J-H, Hwang S-H, Budiman AS, Son H-Y, et al. Microstructure evolution and defect formation in cu through-silicon vias (TSVs) during thermal annealing. J Electron Mater. 2012;41(4):712–9.10.1007/s11664-012-1943-7 ↗
7. Chen SH, Fu SL, Liang D, Chen XH, Mi XJ, Liu P, et al. Preparation and properties of 3D interconnected CNTs/Cu composites. Nanotechnol Rev. 2020;9(1):146–54.10.1515/ntrev-2020-0013 ↗
8. Zhang XH, Zhang Y, Tian BH, Song KX, Liu P, Jia YL, et al. Review of nano-phase effects in high strength and conductivity copper alloys. Nanotechnol Rev. 2019;8(1):383–95.10.1515/ntrev-2019-0034 ↗
9. Feng J, Liang SH, Guo XH, Zhang Y, Song KX. Electrical conductivity anisotropy of copper matrix composites reinforced with SiC whiskers. Nanotechnol Rev. 2019;8(1):285–92.10.1515/ntrev-2019-0027 ↗
10. Beyne E. 3D system integration technologies. 2006 International Symposium on VLSI Technology, Systems, and Applications. Hsinchu: IEEE; 2006. p. 19–27.10.1109/VTSA.2006.251113 ↗
11. Fischer AC, Forsberg F, Lapisa M, Bleiker SJ, Stemme G, Roxhed N, et al. Integrating MEMS and ICs. Microsyst Nanoeng. 2015;1(1):1–16.10.1038/micronano.2015.5 ↗
12. Hu Y, Deb S, Li D, Huang Q. Effects of organic additives on the impurity and grain structure of electrodeposited cobalt. Electrochim Acta. 2021;368(13):1–8.10.1016/j.electacta.2020.137594 ↗
13. Hu Y, Huang Q. Oscillatory behavior in cobalt electrodeposition with 3-mercapto-1-propanesulfonate. J Phys Chem C. 2020;124(39):21608–16.10.1021/acs.jpcc.0c06877 ↗
14. Luo X, Chen CY, Chang TFM, Sone M, Zhang Q, Zhang JZ. The Structure and micro-mechanical properties of electrodeposited cobalt films by micro-compression test. J Electrochem Soc. 2021;168(10):1–7.10.1149/1945-7111/ac2be9 ↗
15. Wu J, Wafula F, Branagan S, Suzuki H, van Eisden J. Mechanism of cobalt bottom-up filling for advanced node interconnect metallization. J Electrochem Soc. 2018;166(1):D3136–41.10.1149/2.0161901jes ↗
16. Kelly J, Chen JHC, Huang H, Hu CK, Liniger E, Patlolla R et al. Experimental study of nanoscale co damascene BEOL interconnect structures. 2016 IEEE International Interconnect Technology Conference/Advanced Metallization Conference. IEEE International Interconnect Technology Conference IITC; 2016. p. 40–2.10.1109/IITC-AMC.2016.7507673 ↗
17. Rigsby MA, Brogan LJ, Doubina NV, Liu YH, Opocensky EC, Spurlin TA, et al. The critical role of pH gradient formation in driving superconformal cobalt deposition. J Electrochem Soc. 2018;166(1):D3167–74.10.1149/2.0211901jes ↗
18. Kang J, Sung M, Byun J, Kwon OJ, Kim JJ. Superconformal cobalt electrodeposition with a hydrogen evolution reaction suppressing additive. J Electrochem Soc. 2020;167(16):1–7.10.1149/1945-7111/abd3b9 ↗
19. Vereecken PM, Binstead RA, Deligianni H, Andricacos PC. The chemistry of additives in damascene copper plating. Ibm J Res Dev. 2005;49(1):3–18.10.1147/rd.491.0003 ↗
20. Dow WP, Li CC, Lin MW, Su GW, Huang CC. Copper fill of microvia using a thiol-modified Cu seed layer and various levelers. J Electrochem Soc. 2009;156(8):D314–20.10.1149/1.3147273 ↗
21. Dow WP, Huang HS, Yen MY, Huang HC. Influence of convection-dependent adsorption of additives on microvia filling by copper electroplating. J Electrochem Soc. 2005;152(6):C425–34.10.1149/1.1901670 ↗
22. Hu Y, Lyons T, Huang Q. Influence of furil dioxime on cobalt electrochemical nucleation and growth. J Electrochem Soc. 2020;167(2):1–11.10.1149/1945-7111/ab69fb ↗
23. Kong DL, Zheng Z, Meng FY, Li N, Li DY. Electrochemical nucleation and growth of cobalt from methanesulfonic acid electrolyte. J Electrochem Soc. 2018;165(16):D783–9.10.1149/2.0191816jes ↗
24. Chan PF, Chiu YD, Dow WP, Krug K, Lee YL, Yau SL. Use of 3,3-thiobis(1-propanesulfonate) to accelerate microvia filling by copper electroplating. J Electrochem Soc. 2013;160(12):D3271–7.10.1149/2.047312jes ↗
25. Dow WP, Huang HS, Yen MY, Chen HH. Roles of chloride ion in microvia filling by copper electrodeposition-II. Studies using EPR and galvanostatic measurements. J Electrochem Soc. 2005;152(2):C77–88.10.1149/1.1849935 ↗
26. Chiu YD, Dow WP. Accelerator screening by cyclic voltammetry for microvia filling by copper electroplating. J Electrochem Soc. 2013;160(12):D3021–7.10.1149/2.006312jes ↗
27. Jovic VD, Jovic GM. Copper electrodeposition from a copper acid baths in the presence of PEG and NaCl. J Serbian Chem Soc. 2001;66(11–12):935–52.10.2298/JSC0112935J ↗
28. Ni XR, Chen YM, Jin XF, Wang C, Huang YZ, Hong Y, et al. Investigation of polyvinylpyrrolidone as an inhibitor for trench super-filling of cobalt electrodeposition. J Taiwan Inst Chem Eng. 2020;112:232–9.10.1016/j.jtice.2020.06.010 ↗
29. Jiang Q, Tallury SS, Qiu YP, Pasquinelli MA. Interfacial characteristics of a carbon nanotube-polyimide nanocomposite by molecular dynamics simulation. Nanotechnol Rev. 2020;9(1):136–45.10.1515/ntrev-2020-0012 ↗
30. Khan S, Nandi CK. Optimizing the underlying parameters for protein-nanoparticle interaction: advancement in theoretical simulation. Nanotechnol Rev. 2014;3(4):347–59.10.1515/ntrev-2014-0002 ↗
31. Saraireh SA, Altarawneh M, Tarawneh MA. Nanosystem’s density functional theory study of the chlorine adsorption on the Fe(100) surface. Nanotechnol Rev. 2021;10(1):719–27.10.1515/ntrev-2021-0051 ↗
32. Hassan J, Diamantopoulos G, Homouz D, Papavassiliou G. Water inside carbon nanotubes: structure and dynamics. Nanotechnol Rev. 2016;5(3):341–54.10.1515/ntrev-2015-0048 ↗
33. Wang CH, Chen Q, Guo TT, Zhang L. Preparation and adsorption properties of nano-graphene oxide/tourmaline composites. Nanotechnol Rev. 2021;10(1):1812–26.10.1515/ntrev-2021-0113 ↗
34. Kim S-H, Zhang Y, Lee J-H, Lee S-Y, Kim Y-H, Rhee KY, et al. A study on interfacial behaviors of epoxy/graphene oxide derived from pitch-based graphite fibers. Nanotechnol Rev. 2021;10(1):1827–37.10.1515/ntrev-2021-0111 ↗
35. Lu T, Chen FW. Multiwfn: a multifunctional wavefunction analyzer. J Comput Chem. 2012;33(5):580–92.10.1002/jcc.22885 ↗
36. Premkumar S, Jawahar A, Mathavan T, Dhas MK, Sathe VG, Benial AMF. DFT calculation and vibrational spectroscopic studies of 2-(tert-butoxycarbonyl(Boc)-amino)-5-bromopyridine. Spectrochim Acta Part A-Mol Biomol Spectrosc. 2014;129:74–83.10.1016/j.saa.2014.02.147 ↗
37. Lee C, Yang W, Parr RG. Development of the Colle-Salvetti correlation-energy formula into a functional of the electron density. Phys Rev B Condens Matter. 1988;37(2):785–9.10.1103/PhysRevB.37.785 ↗
38. Lai Z, Wang S, Wang C, Hong Y, Zhou G, Chen Y, et al. A comparison of typical additives for copper electroplating based on theoretical computation. Comput Mater Sci. 2018;147:95–102.10.1016/j.commatsci.2017.11.049 ↗
39. Murray JS, Politzer P. The electrostatic potential: an overview. Wiley Interdiscip Rev Comput Mol Sci. 2011;1(2):153–63.10.1002/wcms.19 ↗
40. Hackett JC. Chemical reactivity theory: a density functional view. J Am Chem Soc. 2010;132(21):7558.10.1021/ja1030744 ↗
41. Wang C, An MZ, Yang PX, Zhang JQ. Prediction of a new leveler (N-butyl-methyl piperidinium bromide) for through-hole electroplating using molecular dynamics simulations. Electrochem Commun. 2012;18:104–7.10.1016/j.elecom.2012.02.028 ↗
42. Kreider A, Barkey DP, Wong EH. On the displacement of adsorbed polyethylene glycol by 3-mercapto-1-propanesulfonate during copper electrodeposition. J Electrochem Soc. 2014;161(12):D663–5.10.1149/2.0371412jes ↗
43. Zhong Q, Gu M, Li QA. Studies on the influence of sodium 3-mercaptopropanesulphonate additives on copper electrodeposition. Acta Chim Sin. 2010;68(17):1707–12.
44. Gece G. The use of quantum chemical methods in corrosion inhibitor studies. Corros Sci. 2008;50(11):2981–92.10.1016/j.corsci.2008.08.043 ↗
45. Tu HL, Yen PY, Wu HL, Chen S, Vogel W, Yau S, et al. In situ STM of 3-mercaptopropanesulfonate adsorbed on Pt(111) electrode and its effect on the electrodeposition of copper. J Electrochem Soc. 2010;157(4):D206–10.10.1149/1.3295713 ↗
46. Dow WP, Chiu YD, Yen MY. Microvia filling by Cu electroplating over a Au seed layer modified by a disulfide. J Electrochem Soc. 2009;156(4):D155–67.10.1149/1.3078407 ↗
47. Tarasevich YI. The surface energy of hydrophilic and hydrophobic adsorbents. Colloid J. 2007;69(2):212–20.10.1134/S1061933X0702010X ↗