Show source-provided references
1. He Z, Lan X, Hu Q, Li H, Li L, Mao J. Antifouling strategies based on super-phobic polymer materials. Prog Org Coat. 2021;157:106285.
10.1016/j.porgcoat.2021.106285 ↗2. http://corrosion-doctors.org/Seawater/Fouling.htm.
3. Almeida E, Diamantino TC, de Sousa O. Marine paints: The particular case of antifouling paints. Prog Org Coat. 2007;59(1):2–20.
10.1016/j.porgcoat.2007.01.017 ↗4. Xu Y, Yin J, Wang J, Wang X. Design and optimization of solar steam generation system for water purification and energy utilization: A review. Rev Adv Mater Sci. 2019;58(1):226–47.
10.1515/rams-2019-0034 ↗5. Jian W, Hui D, Lau D. Nanoengineering in biomedicine: Current development and future perspectives. Nanotechnol Rev. 2020;9(1):700–15.
10.1515/ntrev-2020-0053 ↗6. Cai S, Wu C, Yang W, Liang W, Yu H, Liu L. Recent advance in surface modification for regulating cell adhesion and behaviors. Nanotechnol Rev. 2020;9(1):971–89.
10.1515/ntrev-2020-0076 ↗7. Eloffy MG, El-Sherif DM, Abouzid M, Elkodous MA, El-nakhas HS, Sadek RF, et al. Proposed approaches for coronaviruses elimination from wastewater: Membrane techniques and nanotechnology solutions. Nanotechnol Rev. 2022;11(1):1–25.
10.1515/ntrev-2022-0001 ↗8. Yun Z, Qin D, Wei F, Xiaobing L. Application of antibacterial nanoparticles in orthodontic materials. Nanotechnol Rev. 2022;11(1):2433–50.
10.1515/ntrev-2022-0137 ↗9. Karwowska E. Antibacterial potential of nanocomposite-based materials – a short review. Nanotechnol Rev. 2017;6(2):243–54.
10.1515/ntrev-2016-0046 ↗10. Luo L, Zhou Y, Xu X, Shi W, Hu J, Li G, et al. Progress in construction of bio-inspired physico-antimicrobial surfaces. Nanotechnol Rev. 2020;9(1):1562–75.
10.1515/ntrev-2020-0089 ↗11. Selim MS, Shenashen MA, El-Safty SA, Higazy SA, Selim MM, Isago H, et al. Recent progress in marine foul-release polymeric nanocomposite coatings. Prog Mater Sci. 2017;87:1–32.
10.1016/j.pmatsci.2017.02.001 ↗12. Zaman Q, Zia KM, Zuber M, Mabkhot YN, Almalki F, Hadda TB. A comprehensive review on synthesis, characterization, and applications of polydimethylsiloxane and copolymers. Int J Plast Technol. 2019;23(2):261–82.
10.1007/s12588-019-09259-y ↗13. Qi D, Zhang K, Tian G, Jiang B, Huang Y. Stretchable electronics based on PDMS substrates. Adv Mater. 2021;33(6):2003155.
10.1002/adma.202003155 ↗14. Das S, Kumar S, Samal SK, Mohanty S, Nayak SK. A review on superhydrophobic polymer nanocoatings: Recent development and applications. Ind Eng Chem Res. 2018;57(8):2727–45.
10.1021/acs.iecr.7b04887 ↗15. Liu J, Yao Y, Li X, Zhang Z. Fabrication of advanced polydimethylsiloxane-based functional materials: Bulk modifications and surface functionalizations. Chem Eng J. 2021;408:127262.
10.1016/j.cej.2020.127262 ↗16. Wang Q, Sun G, Tong Q, Yang W, Hao W. Fluorine-free superhydrophobic coatings from polydimethylsiloxane for sustainable chemical engineering: Preparation methods and applications. Chem Eng J. 2021;426:130829.
10.1016/j.cej.2021.130829 ↗17. Siddiquie RY, Gaddam A, Agrawal A, Dimov SS, Joshi SS. Anti-biofouling properties of femtosecond laser-induced submicron topographies on elastomeric surfaces. Langmuir. 2020;36(19):5349–58.
10.1021/acs.langmuir.0c00753 ↗18. He Z, Ma M, Xu X, Wang J, Chen F, Deng H, et al. Fabrication of superhydrophobic coating via a facile and versatile method based on nanoparticle aggregates. Appl Surf Sci. 2012;258(7):2544–50.
10.1016/j.apsusc.2011.10.090 ↗19. He Z, Ma M, Lan X, Chen F, Wang K, Deng H, et al. Fabrication of a transparent superamphiphobic coating with improved stability. Soft Matter. 2011;7(14):6435–43.
10.1039/c1sm05574g ↗20. He Z, Chen Y, Yang J, Tang C, Lv J, Liu Y, et al. Fabrication of Polydimethylsiloxane films with special surface wettability by 3D printing. Compos Part B: Eng. 2017;129:58–65.
10.1016/j.compositesb.2017.07.025 ↗21. Maan AMC, Hofman AH, de Vos WM, Kamperman M. Recent developments and practical feasibility of polymer-based antifouling coatings. Adv Funct Mater. 2020;30(32):2000936.
10.1002/adfm.202000936 ↗22. Su B, Tian Y, Jiang L. Bioinspired interfaces with superwettability: From materials to chemistry. J Am Chem Soc. 2016;138(6):1727–48.
10.1021/jacs.5b12728 ↗23. He Z, Yang X, Wang N, Mu L, Pan J, Lan X, et al. Anti-biofouling polymers with special surface wettability for biomedical applications. Front Bioeng Biotechnol. 2021;9(1260):807357.
10.3389/fbioe.2021.807357 ↗24. Lan X, Lei Y, He Z, Yin A, Li L, Tang Z, et al. A transparent hydrophilic anti-biofouling coating for intraocular lens materials prepared by “bridging” of the intermediate adhesive layer. J Mater Chem B. 2021;9(17):3696–704.
10.1039/D1TB00065A ↗25. Lei Y, Lan X, He Z, Yin A, Jin W, Hu Q, et al. Multifarious anti-biofouling bioprosthetic heart valve materials with the formation of interpenetrating polymer network structures. Mater Des. 2021;206:109803.
10.1016/j.matdes.2021.109803 ↗26. Zhao X, Zhang R, Liu Y, He M, Su Y, Gao C, et al. Antifouling membrane surface construction: Chemistry plays a critical role. J Membr Sci. 2018;551:145–71.
10.1016/j.memsci.2018.01.039 ↗27. Lejars M, Margaillan A, Bressy C. Fouling release coatings: A nontoxic alternative to biocidal antifouling coatings. Chem Rev. 2012;112(8):4347–90.
10.1021/cr200350v ↗28. Yebra DM, Kiil S, Dam-Johansen K. Antifouling technology–past, present and future steps towards efficient and environmentally friendly antifouling coatings. Prog Org Coat. 2004;50(2):75–104.
10.1016/j.porgcoat.2003.06.001 ↗29. Yang H, Chang H, Zhang Q, Song Y, Jiang L, Jiang Q, et al. Highly branched copolymers with degradable bridges for antifouling coatings. ACS Appl Mater Interfaces. 2020;12(14):16849–55.
10.1021/acsami.9b22748 ↗30. Zhang H, Chiao M. Anti-fouling coatings of poly(dimethylsiloxane) devices for biological and biomedical applications. J Med Biol Eng. 2015;35(2):143–55.
10.1007/s40846-015-0029-4 ↗31. Dobretsov S, Thomason JC. The development of marine biofilms on two commercial non-biocidal coatings: a comparison between silicone and fluoropolymer technologies. Biofouling. 2011;27(8):869–80.
10.1080/08927014.2011.607233 ↗32. Liang Y, Kim S, Yang E, Choi H. Omni-directional protected nanofiber membranes by surface segregation of PDMS-terminated triblock copolymer for high-efficiency oil/water emulsion separation. ACS Appl Mater Interfaces. 2020;12(22):25324–33.
10.1021/acsami.0c05559 ↗33. Carl C, Poole AJ, Sexton BA, Glenn FL, Vucko MJ, Williams MR, et al. Enhancing the settlement and attachment strength of pediveligers of Mytilus galloprovincialis by changing surface wettability and microtopography. Biofouling. 2012;28(2):175–86.
10.1080/08927014.2012.662676 ↗34. Zhao X, Liu C. One-step fabricated bionic PVDF ultrafiltration membranes exhibiting innovative antifouling ability to the cake fouling. J Membr Sci. 2016;515:29–35.
10.1016/j.memsci.2016.05.025 ↗35. Zhang P, Lin L, Zang D, Guo X, Liu M. Designing bioinspired anti-biofouling surfaces based on a superwettability strategy. Small. 2016;13(4):1503334.
10.1002/smll.201503334 ↗36. Shi X, Dou R, Ma T, Liu W, Lu X, Shea KJ, et al. Bioinspired Lotus-like Self-Illuminous Coating. ACS Appl Mater Interfaces. 2015;7(33):18424–8.
10.1021/acsami.5b04499 ↗37. Lee J, Yong K. Combining the lotus leaf effect with artificial photosynthesis: regeneration of underwater superhydrophobicity of hierarchical ZnO/Si surfaces by solar water splitting. NPG Asia Mater. 2015;7(7):e201.
10.1038/am.2015.74 ↗38. Roach P, Shirtcliffe NJ, Newton MI. Progress in superhydrophobic surface development. Soft Matter. 2008;4(2):224–40.
10.1039/B712575P ↗39. Pan S, Guo R, Richardson JJ, Berry JD, Besford QA, Bjornmalm M, et al. Ricocheting droplets moving on super-repellent surfaces. Adv Sci (Weinh). 2019;6(21):1901846.
10.1002/advs.201901846 ↗40. Jiang T, Guo Z, Liu W. Biomimetic superoleophobic surfaces: focusing on their fabrication and applications. J Mater Chem A. 2015;3(5):1811–27.
10.1039/C4TA05582A ↗41. Ball P. Engineering Shark skin and other solutions. Nature. 1999;400(6744):507–9.
10.1038/22883 ↗42. Pu X, Li G, Huang H. Preparation, anti-biofouling and drag-reduction properties of a biomimetic shark skin surface. Biol Open. 2016;5(4):389.
10.1242/bio.016899 ↗44. Kang SM, Lee C, Kim HN, Lee BJ, Lee JE, Kwak MK, et al. Directional oil sliding surfaces with hierarchical anisotropic groove microstructures. Adv Mater. 2013;25(40):5756–61.
10.1002/adma.201302083 ↗45. Bixler GD, Bhushan B. Fluid drag reduction and efficient self-cleaning with rice leaf and butterfly wing bioinspired surfaces. Nanoscale. 2013;5(17):7685–710.
10.1039/c3nr01710a ↗46. Basu S, Hanh BM, Isaiah Chua JQ, Daniel D, Ismail MH, Marchioro M, et al. Green biolubricant infused slippery surfaces to combat marine biofouling. J Colloid Interface Sci. 2020;568:185–97.
10.1016/j.jcis.2020.02.049 ↗47. Zhu D, Li X, Zhang G, Zhang X, Zhang X, Wang T, et al. Mimicking the rice leaf--from ordered binary structures to anisotropic wettability. Langmuir. 2010;26(17):14276–83.
10.1021/la102243c ↗48. Bixler GD, Bhushan B. Rice- and butterfly-wing effect inspired self-cleaning and low drag micro/nanopatterned surfaces in water, oil, and air flow. Nanoscale. 2014;6(1):76–96.
10.1039/C3NR04755E ↗49. Wu D, Wang J-N, Wu S-Z, Chen Q-D, Zhao S, Zhang H, et al. Three-level biomimetic rice-leaf surfaces with controllable anisotropic sliding. Adv Funct Mater. 2011;21(15):2927–32.
10.1002/adfm.201002733 ↗50. Lee SG, Lim HS, Lee DY, Kwak D, Cho K. Tunable anisotropic wettability of rice leaf-like wavy surfaces. Adv Funct Mater. 2013;23(5):547–53.
10.1002/adfm.201201541 ↗51. Xia F, Jiang L. Bio-inspired, smart, multiscale interfacial materials. Adv Mater. 2008;20(15):2842–58.
10.1002/adma.200800836 ↗52. Scardino AJ, de Nys R. Mini review: Biomimetic models and bioinspired surfaces for fouling control. Biofouling. 2011;27(1):73–86.
10.1080/08927014.2010.536837 ↗53. Zarghami S, Mohammadi T, Sadrzadeh M, Van der Bruggen B. Superhydrophilic and underwater superoleophobic membranes – A review of synthesis methods. Prog Polym Sci. 2019;98:101166.
10.1016/j.progpolymsci.2019.101166 ↗54. Martin S, Bhushan B. Transparent, wear-resistant, superhydrophobic and superoleophobic poly(dimethylsiloxane) (PDMS) surfaces. J Colloid Interface Sci. 2017;488:118–26.
10.1016/j.jcis.2016.10.094 ↗55. Li D, Fan Y, Han G, Guo Z. Superomniphobic silk fibroin/Ag nanowires membrane for flexible and transparent electronic sensor. ACS Appl Mater Interfaces. 2020;12(8):10039–49.
10.1021/acsami.9b23378 ↗56. Chen J, Liu Z, Wen X, Xu S, Wang F, Pi P. Two-step approach for fabrication of durable superamphiphobic fabrics for self-cleaning, antifouling, and on-demand oil/water separation. Ind Eng Chem Res. 2019;58(14):5490–500.
10.1021/acs.iecr.9b00049 ↗57. Galante AJ, Haghanifar S, Romanowski EG, Shanks RMQ, Leu PW. Superhemophobic and antivirofouling coating for mechanically durable and wash-stable medical textiles. ACS Appl Mater Interfaces. 2020;12(19):22120–8.
10.1021/acsami.9b23058 ↗58. Movafaghi S, Leszczak V, Wang W, Sorkin JA, Dasi LP, Popat KC, et al. Hemocompatibility of superhemophobic titania surfaces. Adv Healthc Mater. 2017;6(4):1600717.
10.1002/adhm.201600717 ↗59. Du T, Ma S, Pei X, Wang S, Zhou F. Bio-inspired design and fabrication of micro/nano-brush dual structural surfaces for switchable oil adhesion and antifouling. Small. 2017;13(4):1602020.
10.1002/smll.201602020 ↗60. Su M, Liu Y, Zhang Y, Wang Z, Li Y, He P. Robust and underwater superoleophobic coating with excellent corrosion and biofouling resistance in harsh environments. Appl Surf Sci. 2018;436:152–61.
10.1016/j.apsusc.2017.11.215 ↗61. He Z, Yang X, Mu L, Wang N, Lan X. A versatile “3M” methodology to obtain superhydrophobic PDMS-based materials for antifouling applications. Front Bioeng Biotechnol. 2022;10:998852.
10.3389/fbioe.2022.998852 ↗62. Chen S, Li L, Zhao C, Zheng J. Surface hydration: Principles and applications toward low-fouling/nonfouling biomaterials. Polymer. 2010;51(23):5283–93.
10.1016/j.polymer.2010.08.022 ↗64. Wenzel RN. Resistance of solid surfaces to wetting by water. Ind Eng Chem. 1936;28:988–94.
10.1021/ie50320a024 ↗65. Cassie ABD, Baxter S. Wettability of porous surfaces. Trans Faraday Soc. 1944;40:546–51.
10.1039/tf9444000546 ↗66. Chen D, Wu M, Li B, Ren K, Cheng Z, Ji J, et al. Layer-by-layer-assembled healable antifouling films. Adv Mater. 2015;27(39):5882–8.
10.1002/adma.201501726 ↗67. Epstein AK, Wong TS, Belisle RA, Boggs EM, Aizenberg J. Liquid-infused structured surfaces with exceptional anti-biofouling performance. Proc Natl Acad Sci U S A. 2012;109(33):13182–7.
10.1073/pnas.1201973109 ↗68. Guo F, Jiao K, Bai Y, Guo J, Chen Q, Yang R, et al. Novel transcatheter aortic heart valves exhibiting excellent hemodynamic performance and low-fouling property. J Mater Sci Technol. 2019;35(1):207–15.
10.1016/j.jmst.2018.09.026 ↗69. Zhu L, Liu F, Yu X, Xue L. Poly(Lactic Acid) hemodialysis membranes with poly(lactic acid)-block-poly(2-hydroxyethyl methacrylate) copolymer as additive: Preparation, characterization, and performance. ACS Appl Mater Interfaces. 2015;7(32):17748–55.
10.1021/acsami.5b03951 ↗70. Mohan T, Kargl R, Tradt KE, Kulterer MR, Bracic M, Hribernik S, et al. Antifouling coating of cellulose acetate thin films with polysaccharide multilayers. Carbohydr Polym. 2015;116:149–58.
10.1016/j.carbpol.2014.04.068 ↗71. Jiang C, Wang G, Hein R, Liu N, Luo X, Davis JJ. Antifouling strategies for selective in vitro and in vivo sensing. Chem Rev. 2020;120(8):3852–89.
10.1021/acs.chemrev.9b00739 ↗72. Sin M-C, Sun Y-M, Chang Y. Zwitterionic-based stainless steel with well-defined polysulfobetaine brushes for general bioadhesive control. ACS Appl Mater Interfaces. 2014;6(2):861–73.
10.1021/am4041256 ↗73. He H, Xuan X, Zhang C, Song Y, Chen S, Gong X, et al. Simple thermal pretreatment strategy to tune mechanical and antifouling properties of zwitterionic hydrogels. Langmuir. 2019;35(5):1828–36.
10.1021/acs.langmuir.8b01755 ↗74. Zhang J, Qian S, Chen L, Chen L, Zhao L, Feng J. Highly antifouling double network hydrogel based on poly(sulfobetaine methacrylate) and sodium alginate with great toughness. J Mater Sci Technol. 2021;85:235–44.
10.1016/j.jmst.2021.01.012 ↗75. Chen SH, Chang Y, Lee KR, Wei TC, Higuchi A, Ho FM, et al. Hemocompatible control of sulfobetaine-grafted polypropylene fibrous membranes in human whole blood via plasma-induced surface zwitterionization. Langmuir. 2012;28(51):17733–42.
10.1021/la3036902 ↗76. Wang H, Wu Y, Cui C, Yang J, Liu W. Antifouling super water absorbent supramolecular polymer hydrogel as an artificial vitreous body. Adv Sci (Weinh). 2018;5(11):1800711.
10.1002/advs.201800711 ↗77. Zhang J, Chen L, Chen L, Qian S, Mou X, Feng J. Highly antifouling, biocompatible and tough double network hydrogel based on carboxybetaine-type zwitterionic polymer and alginate. Carbohydr Polym. 2021;257:117627.
10.1016/j.carbpol.2021.117627 ↗78. Liu G, Li K, Wang H, Ma L, Yu L, Nie Y. Stable fabrication of zwitterionic coating based on copper-phenolic networks on contact lens with improved surface wettability and broad-spectrum antimicrobial activity. ACS Appl Mater Interfaces. 2020;12(14):16125–36.
10.1021/acsami.0c02143 ↗79. Zhou J, Lin Y, Wang L, Zhou L, Yu B, Zou X, et al. Poly(carboxybetaine methacrylate) grafted on PVA hydrogel via a novel surface modification method under near-infrared light for enhancement of antifouling properties. Colloids Surf A: Physicochem Eng Asp. 2021;617:126369.
10.1016/j.colsurfa.2021.126369 ↗80. Carr LR, Zhou Y, Krause JE, Xue H, Jiang S. Uniform zwitterionic polymer hydrogels with a nonfouling and functionalizable crosslinker using photopolymerization. Biomaterials. 2011;32(29):6893–9.
10.1016/j.biomaterials.2011.06.006 ↗81. Zhang D, Ren B, Zhang Y, Liu Y, Chen H, Xiao S, et al. Micro- and macroscopically structured zwitterionic polymers with ultralow fouling property. J Colloid Interface Sci. 2020;578:242–53.
10.1016/j.jcis.2020.05.122 ↗82. Su X, Hao D, Xu X, Guo X, Li Z, Jiang L. Hydrophilic/hydrophobic heterogeneity anti-biofouling hydrogels with well-regulated rehydration. ACS Appl Mater Interfaces. 2020;12(22):25316–23.
10.1021/acsami.0c05406 ↗83. Erathodiyil N, Chan H-M, Wu H, Ying JY. Zwitterionic polymers and hydrogels for antibiofouling applications in implantable devices. Mater Today. 2020;38:84–98.
10.1016/j.mattod.2020.03.024 ↗84. He M, Gao K, Zhou L, Jiao Z, Wu M, Cao J, et al. Zwitterionic materials for antifouling membrane surface construction. Acta Biomater. 2016;40:142–52.
10.1016/j.actbio.2016.03.038 ↗85. Kang S, Lee M, Kang M, Noh M, Jeon J, Lee Y, et al. Development of anti-biofouling interface on hydroxyapatite surface by coating zwitterionic MPC polymer containing calcium-binding moieties to prevent oral bacterial adhesion. Acta Biomater. 2016;40:70–7.
10.1016/j.actbio.2016.03.006 ↗86. Yeh SB, Chen CS, Chen WY, Huang CJ. Modification of silicone elastomer with zwitterionic silane for durable antifouling properties. Langmuir. 2014;30(38):11386–93.
10.1021/la502486e ↗87. Francolini I, Donelli G, Crisante F, Taresco V, Piozzi A. Antimicrobial polymers for anti-biofilm medical devices: state-of-art and perspectives. In: Donelli G, editor. Biofilm-based Healthcare-associated Infections: Volume II. Cham: Springer International Publishing; 2015. p. 93–117.
10.1007/978-3-319-09782-4_7 ↗88. Seo J-H, Shibayama T, Takai M, Ishihara K. Quick and simple modification of a poly(dimethylsiloxane) surface by optimized molecular design of the anti-biofouling phospholipid copolymer. Soft Matter. 2011;7(6):2968–76.
10.1039/c0sm01292k ↗89. Nakano H, Kakinoki S, Iwasaki Y. Long-lasting hydrophilic surface generated on poly(dimethyl siloxane) with photoreactive zwitterionic polymers. Colloids Surf B: Biointerfaces. 2021;205:111900.
10.1016/j.colsurfb.2021.111900 ↗90. Esteban-Tejeda L, Duff T, Ciapetti G, Daniela Angione M, Myles A, Vasconcelos JM, et al. Stable hydrophilic poly(dimethylsiloxane) via glycan surface functionalization. Polymer. 2016;106:1–7.
10.1016/j.polymer.2016.10.044 ↗91. Eshet I, Freger V, Kasher R, Herzberg M, Lei J, Ulbricht M. Chemical and physical factors in design of antibiofouling polymer coatings. Biomacromolecules. 2011;12(7):2681–5.
10.1021/bm200476g ↗92. Rosenhahn A, Schilp S, Kreuzer HJ, Grunze M. The role of “inert” surface chemistry in marine biofouling prevention. Phys Chem Chem Phys. 2010;12(17):4275–86.
10.1039/c001968m ↗93. Miao S, Xiong Z, Zhang J, Wu Y, Gong X. Polydopamine/SiO2 hybrid structured superamphiphobic fabrics with good photothermal behavior. Langmuir. 2022;38(30):9431–40.
10.1021/acs.langmuir.2c01629 ↗94. Zhang J, Zhang L, Gong X. Large-scale spraying fabrication of robust fluorine-free superhydrophobic coatings based on dual-sized silica particles for effective antipollution and strong buoyancy. Langmuir. 2021;37(19):6042–51.
10.1021/acs.langmuir.1c00706 ↗95. Han X, Gong X. In situ, one-pot method to prepare robust superamphiphobic cotton fabrics for high buoyancy and good antifouling. ACS Appl Mater Interfaces. 2021;13(26):31298–309.
10.1021/acsami.1c08844 ↗96. Liu J, Ye L, Sun Y, Hu M, Chen F, Wegner S, et al. Elastic superhydrophobic and photocatalytic active films used as blood repellent dressing. Adv Mater. 2020;32(11):e1908008.
10.1002/adma.201908008 ↗97. Zhao Y, Liu Y, Xu Q, Barahman M, Lyons AM. Catalytic, self-cleaning surface with stable superhydrophobic properties: Printed polydimethylsiloxane (PDMS) arrays embedded with TiO2 nanoparticles. ACS Appl Mater Interfaces. 2015;7(4):2632–40.
10.1021/am5076315 ↗98. Selim MS, Yang H, Wang FQ, Li X, Huang Y, Fatthallah NA. Silicone/Ag@SiO2 core–shell nanocomposite as a self-cleaning antifouling coating material. RSC Adv. 2018;8(18):9910–21.
10.1039/C8RA00351C ↗99. Selim MS, Yang H, Wang FQ, Fatthallah NA, Huang Y, Kuga S. Silicone/ZnO nanorod composite coating as a marine antifouling surface. Appl Surf Sci. 2019;466:40–50.
10.1016/j.apsusc.2018.10.004 ↗100. Li Q, Zhao X, Li L, Hu T, Yang Y, Zhang J. Facile preparation of polydimethylsiloxane/carbon nanotubes modified melamine solar evaporators for efficient steam generation and desalination. J Colloid Interface Sci. 2021;584:602–9.
10.1016/j.jcis.2020.10.002 ↗