Cobalt iron oxide-infused silicone nanocomposites: Magnetoactive materials for remote actuation and sensing
Source abstract
Abstract
Abstract Magnetoactive polymer composites (MAPCs) are promising smart materials owing to their shape-changing behaviour in response to magnetic fields. MAPCs find promising niches in several applications, including soft robotics, sensors, biomedical implants, smart prosthetics, and flexible electronics. Although several works have reported the synthesis of magnetic-responsive polymer composites, this work utilizes highly magnetic nanoparticles ( i.e. cobalt iron oxide) to produce extremely soft MAPCs. Novel MAPCs were developed using room-temperature vulcanizing (RTV) silicone rubber as the base matrix, incorporating cobalt iron oxide (CoFe 2 O 4 , referred to as CIO) nanoparticles as the magnetic filler. Varying concentrations of CIO nanoparticles (0.25, 0.5, 1, and 3%) were used to synthesize isotropic and anisotropic MAPCs. Silicone/CIO MAPCs were characterized for their microstructural, thermal, mechanical, and magnetic properties. An increase in the CIO nanoparticle concentration within the silicone matrix resulted in an improved mechanical performance, where a compressive modulus of 0.199 MPa for silicone/0.25% CIO improved to 0.340 MPa for silicone/3% CIO. Likewise, an improved tensile strength was observed due to particle alignment, resulting in an increase from 1.25 MPa (for isotropic samples) to 1.356 MPa (for anisotropic samples) in silicone/1% CIO MAPCs. Silicone/CIO MAPCs also revealed a higher failure strain than pure silicone samples. Finally, an improvement in the magnetic properties of MAPCs was observed with increasing CIO concentrations, where increased saturation magnetization from 0.087 to 1.057 EMU/g and remanence from 0.054 to 0.625 EMU/g were recorded with an increase in CIO content from 0.25 to 3% in the silicone matrix. The silicone/CIO composites exhibited suitable magnetic responsiveness and mechanical characteristics that make them promising materials for applications in remote actuation and sensing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Materials and Mechanics · Advanced Sensor and Energy Harvesting Materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Sustainable Development, College of Science and Engineering, Hamad Bin Khalifa University, Qatar Foundation , Doha , 34110 , Qatar
Zienkiewicz Institute for Modelling, Data and AI, Faculty of Science and Engineering, Swansea University , Swansea , SA1 8EN , United Kingdom
References (51)
Show source-provided references
1. Li W, Gu H, Liu Z, Zhang H, Jiang L, Zhou X. Research progress in the synthesis and application of magnetic self-healing polymer composites. Eur Polym J. 2024;202:112633. 10.1016/j.eurpolymj.2023.112633.10.1016/j.eurpolymj.2023.112633 ↗
2. Narayanan P, Pramanik R, Arockiarajan A. Hard magnetics and soft materials—A synergy. Smart Mater Struct. 2024;33:43001. 10.1088/1361-665X/ad2bd8.10.1088/1361-665X/ad2bd8 ↗
3. Lalegani Dezaki M, Bodaghi M. Sustainable 4D printing of magneto-electroactive shape memory polymer composites. Int J Adv Manuf Technol. 2023;126:35–48. 10.1007/s00170-023-11101-0.10.1007/s00170-023-11101-0 ↗
4. Afshari P, Pavlyuk M, Lira C, Katnam K-B, Bodaghi M, Yazdani Nezhad H. Mechanical strain tailoring via magnetic field assisted 3D printing of iron particles embedded polymer nanocomposites. Macromol Mater Eng. 2023;308:2300194. 10.1002/mame.202300194.10.1002/mame.202370023 ↗
5. Tariq A, Arif ZU, Khalid MY, Hossain M, Rasool PI, Umer R, et al. Recent advances in the additive manufacturing of stimuli-responsive soft polymers. Adv Eng Mater. 2023;25:2301074. 10.1002/adem.202301074.10.1002/adem.202301074 ↗
6. Khalid MY, Arif ZU, Tariq A, Hossain M, Ahmed Khan K, Umer R. 3D printing of magneto-active smart materials for advanced actuators and soft robotics applications. Eur Polym J. 2024;205:112718. 10.1016/j.eurpolymj.2023.112718.10.1016/j.eurpolymj.2023.112718 ↗
7. Liu H, Wang F, Wu W, Dong X, Sang L. 4D printing of mechanically robust PLA/TPU/Fe3O4 magneto-responsive shape memory polymers for smart structures. Compos B Eng. 2023;248:110382. 10.1016/j.compositesb.2022.110382.10.1016/j.compositesb.2022.110382 ↗
8. Garcia-Gonzalez D, Moreno MA, Valencia L, Arias A, Velasco D. Influence of elastomeric matrix and particle volume fraction on the mechanical response of magneto-active polymers. Compos B Eng. 2021;215:108796. 10.1016/j.compositesb.2021.108796.10.1016/j.compositesb.2021.108796 ↗
9. Stolbov OV, Raikher YL. Magnetostrictive and magnetoactive effects in piezoelectric polymer composites. Nanomaterials. 2024;14(1):31. 10.3390/nano14010031.10.3390/nano14010031 ↗
10. Stepanov GV, Bakhtiiarov AV, Lobanov DA, Storozhenko PA. Magnetoresistivity and piezoresistivity of magnetoactive elastomers. J Magn Magn Mater. 2023;587:171313. 10.1016/j.jmmm.2023.171313.10.1016/j.jmmm.2023.171313 ↗
11. Bastola AK, Paudel M, Li L, Li W. Recent progress of magnetorheological elastomers: A review. Smart Mater Struct. 2020;29:123002. 10.1088/1361-665X/abbc77.10.1088/1361-665X/abbc77 ↗
12. Silva JA, Gouveia C, Dinis G, Pinto AM, Pereira AM. Giant magnetostriction in low-concentration magnetorheological elastomers. Compos B Eng. 2022;243:110125. 10.1016/j.compositesb.2022.110125.10.1016/j.compositesb.2022.110125 ↗
13. Moreno-Mateos MA, Hossain M, Steinmann P, Garcia-Gonzalez D. Hybrid magnetorheological elastomers enable versatile soft actuators. NPJ Comput Mater. 2022;8:162. 10.1038/s41524-022-00844-1.10.1038/s41524-022-00844-1 ↗
14. Shou Y, Liu L, Liu Q, Le Z, Lee KL, Li H, et al. Mechano-responsive hydrogel for direct stem cell manufacturing to therapy. Bioact Mater. 2023;24:387–400. 10.1016/j.bioactmat.2022.12.019.10.1016/j.bioactmat.2022.12.019 ↗
15. Cedillo-Servin G, Dahri O, Meneses J, van Duijn J, Moon H, Sage F, et al. 3D printed magneto-active microfiber scaffolds for remote stimulation and guided organization of 3D in vitro skeletal muscle models. Small. 2024;20:2307178. 10.1002/smll.202307178.10.1002/smll.202307178 ↗
16. Roy A, Zhang Z, Eiken MK, Shi A, Pena-Francesch A, Loebel C. Programmable tissue folding patterns in structured hydrogels. Adv Mater. 2024;36(43):2300017. 10.1002/adma.202300017.10.1002/adma.202300017 ↗
17. Bastola AK, Hossain M. The shape – morphing performance of magnetoactive soft materials. Mater Des. 2021;211:110172. 10.1016/j.matdes.2021.110172.10.1016/j.matdes.2021.110172 ↗
18. Gopinath S, Adarsh NN, Radhakrishnan Nair P, Mathew S. Recent trends in thermo-responsive elastomeric shape memory polymer nanocomposites. Polym Compos. 2023;44:4433–58. 10.1002/pc.27464.10.1002/pc.27464 ↗
19. Lu S, Wang M, Zhao Z. Recent advances and future developments in Fe-based amorphous soft magnetic composites. J Non Cryst Solids. 2023;616:122440. 10.1016/j.jnoncrysol.2023.122440.10.1016/j.jnoncrysol.2023.122440 ↗
20. Mishra S, Yadav MD. Magnetic nanoparticles: A comprehensive review from synthesis to biomedical frontiers. Langmuir. 2024;40:17239–69. 10.1021/acs.langmuir.4c01532.10.1021/acs.langmuir.4c01532 ↗
21. Nam TH, Petríková I, Marvalová B. Effects of applied strain, magnetic field, and temperature on the compressive stress relaxation behavior of magneto-sensitive elastomers. Mech Time Depend Mater. 2024;28:917–36. 10.1007/s11043-023-09654-4.10.1007/s11043-023-09654-4 ↗
22. Xian W, Zhan Y-S, Maiti A, Saab AP, Li Y. Filled elastomers: Mechanistic and physics-driven modeling and applications as smart materials. Polymers (Basel). 2024;16(10):1387. 10.3390/polym16101387.10.3390/polym16101387 ↗
23. Kumar V, Alam MN, Manikkavel A, Song M, Lee D-J, Park S-S. Silicone rubber composites reinforced by carbon nanofillers and their hybrids for various applications: A review. Polymers (Basel). 2021;13. 10.3390/polym13142322.10.3390/polym13142322 ↗
24. Haniffa MACM, Munawar K, Chee CY, Pramanik S, Halilu A, Illias HA, et al. Cellulose supported magnetic nanohybrids: Synthesis, physicomagnetic properties and biomedical applications-A review. Carbohydr Polym. 2021;267:118136. 10.1016/j.carbpol.2021.118136.10.1016/j.carbpol.2021.118136 ↗
25. Horváth B, Szalai I. Magnetic susceptibility and response time of isotropic and structured magnetorheological elastomers. J Intell Mater Syst Struct. 2023;34:706–16. 10.1177/1045389X221117489.10.1177/1045389X221117489 ↗
26. Balogh D, Guba S, Horváth B, Szalai I. Magnetic field-induced deformation of isotropic magnetorheological elastomers. Magnetochemistry. 2022;8(11):146. 10.3390/magnetochemistry8110146.10.3390/magnetochemistry8110146 ↗
27. Moreno-Mateos MA, Lopez-Donaire ML, Hossain M, Garcia-Gonzalez D. Effects of soft and hard magnetic particles on the mechanical performance of ultra-soft magnetorheological elastomers. Smart Mater Struct. 2022;31(6):065018. 10.1088/1361-665X/ac6bd3.10.1088/1361-665X/ac6bd3 ↗
28. Stepanov GV, Chertovich AV, Kramarenko EY. Magnetorheological and deformation properties of magnetically controlled elastomers with hard magnetic filler. J Magn Magn Mater. 2012;324(21):3448–51. 10.1016/j.jmmm.2012.02.062.10.1016/j.jmmm.2012.02.062 ↗
29. Lee CJ, Kwon SH, Choi HJ, Chung KH, Jung JH. Enhanced magnetorheological performance of carbonyl iron/natural rubber composite elastomer with gamma-ferrite additive. Colloid Polym Sci. 2018;296:1609–13. 10.1007/s00396-018-4373-0.10.1007/s00396-018-4373-0 ↗
30. Rahmatabadi D, Mirasadi K, Bayati A, Khajepour M, Ghasemi I, Baniassadi M, et al. 4D printing thermo-magneto-responsive PETG-Fe3O4 nanocomposites with enhanced shape memory effects. Appl Mater Today. 2024;40:102361. 10.1016/j.apmt.2024.102361.10.1016/j.apmt.2024.102361 ↗
31. Mirasadi K, Rahmatabadi D, Ghasemi I, Khodaei M, Baniassadi M, Bodaghi M, et al. 3D and 4D printing of PETG–ABS–Fe3O4 nanocomposites with supreme remotely driven magneto-thermal shape-memory performance. Polymers (Basel). 2024;16(10):1398. 10.3390/polym16101398.10.3390/polym16101398 ↗
32. Yousefi MA, Rahmatabadi D, Baniassadi M, Bodaghi M, Baghani M. 4D printing of multifunctional and biodegradable PLA-PBAT-Fe3O4 nanocomposites with supreme mechanical and shape memory properties. Macromol Rapid Commun. 2025;46:2400661. 10.1002/marc.202400661.10.1002/marc.202400661 ↗
33. Liao Z, Zoumhani O, Boutry CM. Recent advances in magnetic polymer composites for BioMEMS: A review. Materials. 2023;16(10):3802. 10.3390/ma16103802.10.3390/ma16103802 ↗
34. Taccola S, Bakhshi H, Sanchez Sifuentes M, Lloyd P, Tinsley LJ, Macdonald J, et al. Dual-material aerosol jet printing of magneto-responsive polymers with in-process tailorable composition for small-scale soft robotics. Adv Mater Technol. 2024;9(22):2400463. 10.1002/admt.202400463.10.1002/admt.202400463 ↗
35. Wang Z, Wu Y, Zhu B, Chen Q, Wang L, Zhao Y, et al. A magnetic soft robot with multimodal sensing capability by multimaterial direct ink writing. Addit Manuf. 2023;61:103320. 10.1016/j.addma.2022.103320.10.1016/j.addma.2022.103320 ↗
36. Brito-Pereira R, Martins P, Lanceros-Mendez S, Ribeiro C. Polymer-based magnetoelectric scaffolds for wireless bone repair: The fillers’ effect on extracellular microenvironments. Compos Sci Technol. 2023;243:110263. 10.1016/j.compscitech.2023.110263.10.1016/j.compscitech.2023.110263 ↗
37. Mucolli A, Midmer A, Manolesos M, Aldosari S, Lira C, Yazdani Nezhad H. Low magnetic field induced extrinsic strains in multifunctional particulate composites: An interrupted mechanical strengthening in 3D-printed nanocomposites. J Compos Sci. 2024;8(6):231. 10.3390/jcs8060231.10.3390/jcs8060231 ↗
38. Savelev DV, Glavan G, Burdin DA, Belyaeva IA, Fetisov LY, Shamonin M, et al. Enhancement of magnetoelectric effect in polymer composites at low resonance frequencies by operation in the transverse-transverse mode. J Magn Magn Mater. 2024;598:172020. 10.1016/j.jmmm.2024.172020.10.1016/j.jmmm.2024.172020 ↗
39. Makarova LA, Alekhina IA, Khairullin MF, Makarin RA, Perov NS. Dynamic magnetoelectric effect of soft layered composites with a magnetic elastomer. Polymers (Basel). 2023;15(10):2262. 10.3390/polym15102262.10.3390/polym15102262 ↗
40. Perales-Martínez IA, Palacios-Pineda LM, Elías-Zúñiga A, Olvera-Trejo D, Del Ángel-Sánchez K, Cruz-Cruz I, et al. Magnetic and viscoelastic response of magnetorheological elastomers based on a combination of iron nano- and microparticles. Polymers (Basel). 2023;15(18):3703. 10.3390/polym15183703.10.3390/polym15183703 ↗
41. Acharya B, Behera A, Moharana S, Behera S. State-of-the-art in textile polymer composites and applications. In: Moharana S, Sahu BB, Nayak AK and Tiwari SK, editors. Polymer composites: Fundamentals and applications. Singapore: Springer; 2024. p. 357–98. 10.1007/978-981-97-2075-0_12.10.1007/978-981-97-2075-0_12 ↗
42. de Jong PH, Salvatori Y, Libonati F, Mirzaali MJ, Zadpoor AA. Shape-locking in architected materials through 3D printed magnetically activated joints. Mater Des. 2023;235:112427. 10.1016/j.matdes.2023.112427.10.1016/j.matdes.2023.112427 ↗
43. Hassan H, Hallez H, Thielemans W, Vandeginste V. A review of electro-active shape memory polymer composites: Materials engineering strategies for shape memory enhancement. Eur Polym J. 2024;208:112861. 10.1016/j.eurpolymj.2024.112861.10.1016/j.eurpolymj.2024.112861 ↗
44. Jamaludin AS, Najwa N, Mohd Zawawi MZ, Abdul Manaf AR, Hamidon R. State-of-the-art developments and perspectives on multifunctional magnetic soft composites (MMSCs). In: Abd. Aziz R, Ismail Z, Iqbal AKMA, Ahmed I, editors. Intelligent manufacturing and mechatronics. iM3F 2023. Springer proceedings in materials. Singapore: Springer. vol 40; 2024. p. 533–42.10.1007/978-981-99-9848-7_48 ↗
45. Kim H, Zan G, Seo Y, Lee S, Park C. Stimuli-responsive liquid metal hybrids for human-interactive electronics. Adv Funct Mater. 2024;34:2308703. 10.1002/adfm.202308703.10.1002/adfm.202308703 ↗
46. Kalva SN, Ali F, Velasquez CA, Koç M. 3D-printable PLA/Mg composite filaments for potential bone tissue engineering applications. Polymers (Basel). 2023;15(11):2572. 10.3390/polym15112572.10.3390/polym15112572 ↗
47. Ali F, Al Rashid A, Kalva SN, Koç M. Mg-Doped PLA composite as a potential material for tissue engineering—Synthesis, characterization, and additive manufacturing. Materials. 2023;16(19):6506. 10.3390/ma16196506.10.3390/ma16196506 ↗
48. A.S. D638-14, Standard test method for tensile properties of plastics 1, 2006. p. 1–15. 10.1520/D0638-14.1.
49. Petcharoen K, Sirivat A. Magneto-electro-responsive material based on magnetite nanoparticles/polyurethane composites. Mater Sci Eng: C. 2016;61:312–23. 10.1016/j.msec.2015.12.014.10.1016/j.msec.2015.12.014 ↗
50. Thummarungsan N, Sirivat A. Magneto-responsive biopolymer composite based on plasticized poly(butylene succinate-co-butylene adipate) and Fe3O4 for flexible actuator application. J Polym Env. 2024;32:3246–57. 10.1007/s10924-024-03190-z.10.1007/s10924-024-03190-z ↗
51. Al Rashid A, Al-Maslamani NA, Abutaha A, Hossain M, Koç M. Cobalt iron oxide (CoFe2O4) reinforced polyvinyl alcohol (PVA) based magnetoactive polymer nanocomposites for remote actuation. Mater Sci Eng: B. 2025;311:117838. 10.1016/j.mseb.2024.117838.10.1016/j.mseb.2024.117838 ↗