journal article·2016-10-01Open access

Towards low energy consumption data storage era using phase-change probe memory with TiN bottom electrode

Lei Wang, Sidi Gong, Cihui Yang, Jing Wen

Nanotechnology Reviews· Volume 5· Issue 5

Abstract

Abstract Phase-change probe memory has been extensively regarded as one of the most prospective candidates to satisfy the recording density requirement from the incoming age of big data. However, in spite of recent advances, the energy consumption of phase-change probe memory still remains fairly high due to the use of the diamond-like carbon bottom electrode usually having a relatively high electric resistivity. In this case, the possibility of using titanium nitride to replace the diamond-like carbon as the electrode materials is investigated in this paper. The thickness and time-dependent resistivity of titanium nitride film is measured, allowing for a more conductive characteristic and a better stability than diamond-like carbon film at the same condition. Consequently, the writing of crystalline bit using the previously designed phase-change probe memory architecture but with titanium nitride bottom electrode is performed experimentally, and results show that using titanium nitride as bottom electrode would enable an achievement of ultra-high recording density with lower energy consumption than the phase-change stack with diamond-like carbon electrode.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Phase-change materials and chalcogenides · Advanced Memory and Neural Computing · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Information Engineering, Nanchang Hangkong University, 330063, Nanchang, P. R. China , Phone: +86 791 83953463, Fax: +86 791 83953732

School of Information Engineering, Nanchang Hangkong University, 330063, Nanchang, P. R. China

Funding

National Natural Science Foundation of China

References (18)

Show source-provided references
1. Turner V. IDC Tech Report 2014; 1–17.
2. Wright CD, Armand M, Aziz MM. Terabit-per-square-inch data storage using phase-change media and scanning electrical nanoprobes. IEEE Trans. Nanotechnol. 2006, 5, 51–61.10.1109/TNANO.2005.861400 ↗
3. Hamman HF, O’Boyle M, Martin YC, Rooks M, Wickramasinghe HK. Terabit-per-square-inch data storage using phase-change media and scanning electrical nanoprobes. Nat. Mater. 2006, 5, 383–387.10.1109/TNANO.2005.861400 ↗
4. Gidon S, Lemonnier O, Rolland B, Bichet O, Dressler C, Samson Y. Electrical probe storage using Joule heating in phase change media. Appl. Phys. Lett. 2004, 85, 6392–6394.10.1063/1.1834718 ↗
5. Bhaskaran H, Sebastian A, Pauza A, Pozidis H, Despont H. Nanoscale phase transformation in Ge[sub 2]Sb[sub 2]Te[sub 5] using encapsulated scanning probes and retraction force microscopy. Rev. Sci. Instrum. 2009, 80, 083701–083706.10.1063/1.3204449 ↗
6. Wang YF, Guo JM, Zhao J, Ding DL, He YY, Zhang JY. Medium ion energy synthesis of hard elastic fullerene-like hydrogenated carbon film with ultra-low friction and wear in humid air. Mater. Lett. 2015, 143, 188–190.10.1016/j.matlet.2014.12.061 ↗
7. Sebastian A, Pauza A, Rossel C, Shelby RM, Rodríguez AF, Pozidis H, Eleftheriou.E. Resistance switching at the nanometre scale in amorphous carbon. New J. Phys. 2011, 13, 013020–12.10.1088/1367-2630/13/1/013020 ↗
8. Ponon NK, Appleby DJ, Arac E, King PJ, Ganti S, Kwa KSK, O’Neill A. Effect of deposition conditions and post deposition anneal on reactively sputtered titanium nitride thin films. Thin Solid Films 2015, 578, 31–37.10.1016/j.tsf.2015.02.009 ↗
9. Lawand NS, French PJ, Briaire JJ, Frijns JHM. Thin titanium nitride films deposited using DC magnetron sputtering used for neural stimulation and sensing purposes. Procedia. Engin. 2012, 47, 726–729.10.1016/j.proeng.2012.09.250 ↗
10. Zhang LN, Tong S, Liu HN, Li YL, Wang Z. Effects of sputtering and assisting ions on the orientation of titanium nitride films fabricated by ion beam assisted sputtering deposition from metal target. Mater. Lett. 2016, 171, 304–307.10.1016/j.matlet.2016.02.100 ↗
11. Horii H, Yi JH, Park JH, Ha YH, Baek IG, Park So, Hwang YN, Lee SH, Kim YT, Lee KH, Chung U-I, Moon JT. A novel cell technology using N-doped GeSbTe films for phase change RAM. Digest VLSI Technol. Symp. 2003, 177–178.
12. Wong PHS, Raoux S, Kim SB, Liang JL, Reifenberg JP, Rajendran BP, Asheghi M, Goodson KE. Phase change memory. Proc. IEEE 2010, 98, 2201–2227.10.1109/JPROC.2010.2070050 ↗
13. Wang L, Gai S. The next generation mass storage devices – Physical principles and current status. Contemp. Phys. 2014, 55, 75–93.10.1080/00107514.2013.878565 ↗
14. Kim DH, Merget F, Forst M, Kurz H. Three-dimensional simulation model of switching dynamics in phase change random access memory cells. J. Appl. Phys. 2007, 106, 1–12.10.1063/1.2710440 ↗
15. Samani MK, Ding XZ, Khosravian N, Amin-Ahmadi B, Yi Y, Chen G, Neyts EC, Bogaerts A, Tay BK. Thermal conductivity of titanium nitride/titanium aluminum nitride multilayer coatings deposited by lateral rotating cathode arc. Thin Solid Films 2015, 578, 133–138.10.1016/j.tsf.2015.02.032 ↗
16. Wang L, Wright CD, Shah P, Aziz MM, Sebastian A, Pozidis H, Pauza A. Ultra high density scanning electrical probe phase-change memory for archival storage. Jpn. J. Appl. Phys. 2011, 50, 1–2.10.1143/JJAP.50.09MD04 ↗
17. Wang L, Wright CD, Aziz MM, Shah P, Yang CH, Yang GW. Terabit-per-square-inch scanning probe phase-change memory model based on nucleation-growth theory. Mater. Lett. 2013, 112, 51–53.10.1016/j.matlet.2013.08.121 ↗
18. Gao D, Liu B, Xu Z, Li Z-C, Xia Y-Y, Wang Q, Wang H, Li Y, Song Z, Wang L, Zhan Y, Feng S. The Effect of Ti-Rich TiN Film on Thermal Stability of Ge2Sb2Te5for Phase Change Memory. ECS J. Solid State Sci. Technol. 2016, 5, 245–249.10.1149/2.0191605jss ↗