Effects of microalloying elements added by in situ synthesis on the microstructure of WCu composites
Source abstract
Abstract
Abstract The addition of microalloying elements improves the microstructure and properties of copper-based materials. In this study, WCu composites are synthesized in situ with Fe, Ni, or Mn as microalloying elements, and the effects of each element on the microstructural characteristics of the obtained composite are investigated. Fe, Ni, and Mn can be added in situ to WCu composites by thermite reduction. Increasing the temperature is not conducive to the reduction of MnO 2 by Al. Ni, Fe, and Mn were well dissolved in the copper matrix, and their contents decreases in turn, while the Al content in the matrix increases in turn. Mn clearly reduces the size of tungsten particles, and the size reduction effect of the microalloying elements on tungsten particles follows the order Mn > Fe > Ni. The effect on the wettability of the interface follows the order Ni > Mn > Fe. Increasing the interfacial wetting is not conducive to the refinement of tungsten particles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Nanoporous metals and alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Henan University of Science and Technology , Luoyang 471023 , China
Provincial and Ministerial Co-construction Collaborative Innovation Center of Nonferrous New Materials and Advanced Processing Technology , Luoyang 471023 , China
Henan Key Laboratory of Advanced Non-Ferrous of Metals , Luoyang 471023 , China
References (32)
Show source-provided references
1. Madhur V , Srikanth M , Annamalai AR , Muthuchamy A , Jen CP . Effect of nano copper on the densification of spark plasma sintered W-Cu composites. Nanomater. 2021;11(2):413.10.3390/nano11020413 ↗
2. Zhang X , Zhang Y , Tian B , Jia Y , Liu Y , Song K , et al. Cr Effects on the electrical contact properties of the Al2O3-Cu/15W composites. Nanotechnol Rev. 2019;8(1):128–35.10.1515/ntrev-2019-0012 ↗
3. Zhang XH , Zhang Y , Tian BH , Jia YL , Liu Y , Song KX , et al. Arc erosion behavior of TiB2/Cu composites with single-scale and dual-scale TiB2 particles. Nanotechnol Rev. 2019;8(1):619–27.10.1515/ntrev-2019-0054 ↗
4. Dong LL , Chen WG , Zheng CH , Deng N . Microstructure and properties characterization of tungsten–copper composite materials doped with graphene. J Alloy Compd. 2017;695:1637–46.10.1016/j.jallcom.2016.10.310 ↗
5. Krauss W , Lorenz J , Konys J , Gaganidze E . Mechanical characterization of electrochemically based W-Cu joints for low-temperature heat sink application. Fusion Eng Des. 2017;124:220–5.10.1016/j.fusengdes.2017.05.119 ↗
6. Xu L , Srinivasakannan C , Zhang LB , Yan M , Peng JH , Xia HG , et al. Fabrication of tungsten-copper alloys by microwave hot pressing sintering. J Alloy Compd. 2016;658(15):23–8.10.1016/j.jallcom.2015.10.186 ↗
7. Wang YL , Zhuo LC , Yin EH . Progress, challenges and potentials/trends of tungsten-copper (W Cu) composites/pseudo-alloys: Fabrication, regulation and application. Int J Refract Met Hard Mater. 2021;100:105648.10.1016/j.ijrmhm.2021.105648 ↗
8. Echlin MP , Mottura A , Wang M , Mignone PJ , Riley DP , Franks GV , et al. Three-dimensional characterization of the permeability of W-Cu composites using a new “Tribeam” technique. Acta Mater. 2014;64:307–15.10.1016/j.actamat.2013.10.043 ↗
9. Feng J , Liang SH , Guo XH , Zhang Y , Song KX . Electrical conductivity anisotropy of copper matrix composites reinforced with SiC whiskers. Nanotechnol Rev. 2019;8(1):285–92.10.1515/ntrev-2019-0027 ↗
10. Zhang XH , Zhang Y , Tian BH , Song KX , Liu P , Jia YL , et al. Review of nano-phase effects in high strength and conductivity copper alloys. Nanotechnol Rev. 2019;8(1):383–95.10.1515/ntrev-2019-0034 ↗
11. Zhao MY , Inas I , Pfeifenberger MJ , Wurmshuber M , Kiener D . Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution. Acta Mater. 2020;182:215–25.10.1016/j.actamat.2019.10.030 ↗
12. Zhang Y , Tan G , Zhang MY , Yu Q , Liu ZQ , Liu YY , et al. Bioinspired tungsten-copper composites with bouligand-type architectures mimicking fish scales. J Mater Sci Technol. 2022;96(10):21–30.10.1016/j.jmst.2021.04.022 ↗
13. Yao GC , Pan SH , Yuan J , Guan Z , Li XC . A novel process for manufacturing copper with size-controlled in-situ tungsten nanoparticles by casting. J Mater Process Technol. 2021;296:117187.10.1016/j.jmatprotec.2021.117187 ↗
14. Lu TX , Chen CG , Li P , Zhang CZ , Han WH , Zhou Y , et al. Enhanced mechanical and electrical properties of in situ synthesized nano-tungsten dispersion-strengthened copper alloy. Mater Sci Eng A. 2021;799:140161.10.1016/j.msea.2020.140161 ↗
15. Wang X , Zhang X , Zhao L , Zhao C , Zhang H , Du Y , et al. Tungsten/copper composite sheets prepared by a novel encapsulation rolling technique. J Alloy Compd. 2021;884(5):161051–77.10.1016/j.jallcom.2021.161051 ↗
16. Johnson JL , German RM . Phase equilibria effects on the enhanced liquid phase sintering of tungsten-copper. Metall Trans A. 1993;24(11):2369–77.10.1007/BF02646516 ↗
17. Cao WC , Liang SH , Gao ZF , Wang XH , Yang XH . Effect of Fe on vacuum breakdown properties of CuW alloys. Int J Refract Met Hard Mater. 2011;29(6):656–61.10.1016/j.ijrmhm.2011.04.014 ↗
18. Yang XH , Xiao P , Liang SH , Zou JT , Fan ZK . Alloying effect of Ni and Cr on the wettability of copper on W substrate. Acta Metall Sin. 2008;21(5):369–79.10.1016/S1006-7191(08)60061-7 ↗
19. Wang C , Liang SH , Cao F , Zhang Q . Interface microstructure evolution of a novel CuW/Al composite fabricated by an infiltration method. J Alloy Compd. 2020;816:152506.10.1016/j.jallcom.2019.152506 ↗
20. Bai YX , Liang SH , Wang XH . Simulation on the infiltration with insufficience of molten Cu into W micro-channel. Int J Refract Met Hard Mater. 2015;50(5):100–5.10.1016/j.ijrmhm.2014.12.004 ↗
21. Coester B , Wong G , Xu Z , Tang J , Gan WL , Lew WS . Enhanced spin Hall conductivity in tungsten-copper alloys. J Magn Magn Mater. 2021;523:167545.10.1016/j.jmmm.2020.167545 ↗
22. Zhuo LC , Zhang JL , Zhang QQ , Wang HL , Zhao Z , Chen QY , et al. Achieving both high conductivity and reliable high strength for W-Cu composite alloys using spherical initial powders. Vac. 2020;181:109620.10.1016/j.vacuum.2020.109620 ↗
23. He G , Zhao P , Guo SB , Chen YX , Liu GH , Li JT . In suit synthesis and bonding of Cu to W–Cu composite by combustion synthesis and centrifugal infiltration. J Alloy Compd. 2013;579:71–4.10.1016/j.jallcom.2013.04.210 ↗
24. Guo YJ , Guo HT , Gao BX , Wang XG , Hu YB , Shi ZQ . Rapid consolidation of ultrafine grained W-30 wt% Cu composites by field assisted sintering from the sol-gel prepared nanopowders. J Alloy Compd. 2017;724:155–62.10.1016/j.jallcom.2017.07.023 ↗
25. Zhang YH , Zhuo LC , Zhao Z , Zhang QQ , Zhang JL , Liang SH , et al. The influence of pre-sintering temperature on the microstructure and properties of infiltrated ultrafine-grained tungsten-copper composites. J Alloy Compd. 2020;823(15):153761.10.1016/j.jallcom.2020.153761 ↗
26. Cheng C , Dou ZH , Zhang TA , Song YL . Multistage desulfurization mechanism to reduce sulfur content of high ferrotitanium prepared using thermite method. Rare Met. 2021;40:2313–9.10.1007/s12598-020-01583-2 ↗
27. Cheng C , Dou ZH , Zhang TA , Su JM , Liu Y , Niu LP . Sulfur distribution in preparation of high titanium ferroalloy by thermite method with different CaO additions. Rare Met. 2019;38(08):793–81.10.1007/s12598-018-1170-3 ↗
28. Cheng C , Dou ZH , Zhang TA , Su JM , Niu LP . Distribution and control mechanism of Al and O residuals in ferrotitanium prepared by aluminothermic reduction with insufficient Al. JOM. 2019;71:809–14.10.1007/s11837-018-3212-6 ↗
29. Cheng C , Dou ZH , Zhang TA . Formation mechanism and distribution of Al and O in the ferrotitanium with different Ti contents prepared by thermite method. JOM. 2019;71(10):3584–9.10.1007/s11837-019-03597-3 ↗
30. Cheng C , Song KX , Mi XJ , Wu BA , Xiao Z , Xie HF , et al. Microstructural evolution and properties of Cu-20 wt% Ag alloy wire by multi-pass continuous drawing. Nanotechnol Rev. 2020;9(1):1359–67.10.1515/ntrev-2020-0108 ↗
31. Merzhanov AG . The chemistry of self-propagating high-temperature synthesis. J Mater Chem. 2004;18:7766–9.10.1039/b401358c ↗
32. Yang XH , Fan ZK , Liang SH , Peng X . Effects of Fe on wetting behaviors and interfacial characteristics between copper alloy and W substrate. Trans Nonferrous Met Soc China. 2009;19(1):153–9.