journal article·2020-04-30Open access

Crack closure and flexural tensile capacity with SMA fibers randomly embedded on tensile side of mortar beams

Chi-Young Jung, Jong-Han Lee

Nanotechnology Reviews· Volume 9· Issue 1

Abstract

Abstract In this study, an experimental investigation was conducted to assess the flexural tensile strength and crack-closing performance of mortar beams containing short shape memory alloy (SMA) fibers, randomly distributed only on the tensile side. The SMA fibers were mainly composed of titanium (Ti), nickel (Ni), and niobium (Nb). In addition, the effect of tensile steel wires on the flexural strength and crack-closing performance was evaluated. A four-point bending test was performed to evaluate the post-cracking tensile strength. This study also suggested a proper model to calculate the ultimate flexural moment of the SMA fiber–embedded beams. Subsequently, a heating plate that could be installed at the bottom of the beam was used to induce the shape memory effect and measure the closed crack width. This study assessed the crack-closing performance induced by the SMA fibers at the bottom side of the beams and the resistance of the tensile wires in the beams.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Masonry and Concrete Structural Analysis · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Seismic Simulation Test Center, Pusan National University , Yangsan 50612 , Republic of Korea

Department of Civil Engineering, Inha University , Incheon 22212 , Republic of Korea

References (41)

Show source-provided references
1. Jani JM, Leary M, Subic A, Gibson MA. A review of shape memory alloy research: applications and opportunities. Mater Des. 2014;56:1078–113.10.1016/j.matdes.2013.11.084 ↗
2. Torra V, Martorell F, Lovey FC. Civil engineering applications: specific properties of NiTi thick wires and their damping capabilities. Shape Memory Superelast. 2017;3(4):403–13.10.1007/s40830-017-0135-y ↗
3. Wang W, Fang C, Yang X, Chen Y, Ricles J, Sause R. Innovative use of a shape memory alloy ring spring system for self-centering connections. Eng Struct. 2017;153:503–15.10.1016/j.engstruct.2017.10.039 ↗
4. Lu X, Zhang L, Li Y. Improvement to composite frame systems for seismic and progressive collapse resistance. Eng Struct. 2019;186:227–42.10.1016/j.engstruct.2019.02.006 ↗
5. Li R, Ge H, Usami T, Shu G. A strain-based post-earthquake serviceability verification method for steel frame-typed bridge piers installed with seismic dampers. J Earthquake Eng. 2017;21(4):635–51.10.1080/13632469.2016.1157531 ↗
6. Dolce M, Cardone D. Mechanical behaviour of shape memory alloys for seismic applications 1. Martensite and austenite NiTi bars subjected to torsion. Int J Mech Sci. 2001;43:2631–56.10.1016/S0020-7403(01)00049-2 ↗
7. Dolce M, Cardone D. Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension. Int J Mech Sci. 2001;43:2657–77.10.1016/S0020-7403(01)00050-9 ↗
8. Mekki OB, Auricchio F. Performance evaluation of shape-memory-alloy superelastic behavior to control a stay cable in cable-stayed bridges. Int J Non-Lin Mech. 2011;46(2):470–7.10.1016/j.ijnonlinmec.2010.12.002 ↗
9. Torra V, Isalgue A, Auguet C, Carreras G, Lovey FC, Terriault P, et al. SMA in mitigation of extreme loads in civil engineering: damping actions in stayed cables. Appl Mech Mater. 2011;82:539–44.10.4028/www.scientific.net/AMM.82.539 ↗
10. Zhang Y, Zhu S. Seismic response control of building structures with superelastic shape-memory alloy wire dampers. J Eng Mech. 2008;134(3):240–51.10.1061/(ASCE)0733-9399(2008)134:3(240) ↗
11. Dieng L, Helbert G, Chirani SA, Lecompte T, Pilvin P. Use of shape memory alloys damper device to mitigate vibration amplitudes of bridge cables. Eng Struct. 2013;56:1547–56.10.1016/j.engstruct.2013.07.018 ↗
12. Massah SR, Dorvar H. Design and analysis of eccentrically braced steel frames with vertical links using shape memory alloys. Smart Mater Struct. 2014;23(11):115015.10.1088/0964-1726/23/11/115015 ↗
13. Yang CSW, Desroches R, Leon RT. Design and analysis of braced frames with shape memory alloy and energy-absorbing hybrid devices. Eng Struct. 2010;32(2):498–507.10.1016/j.engstruct.2009.10.011 ↗
14. DesRoches R, Smith B. Shape memory alloys in seismic resistant design and retrofit: a critical review of their potential and limitations. J Earthquake Eng. 2004;8(3):415–29.10.1080/13632460409350495 ↗
15. Wang Z, Xu L, Sun X, Shi M, Liu J. Fatigue behavior of glass-fiber-reinforced epoxy composites embedded with shape memory alloy wires. Compos Struct. 2017;178:311–9.10.1016/j.compstruct.2017.07.027 ↗
16. Gholampour A, Ozbakkaloglu T. Understanding the compressive behavior of shape memory alloy (SMA)-confined normal- and high-strength concrete. Compos Struct. 2018;202:943–53.10.1016/j.compstruct.2018.05.008 ↗
17. Pareek S, Suzuki Y, Araki Y, Youssef MA, Meshaly M. Plastic hinge relocation in reinforced concrete beams using Cu–Al–Mn SMA bars. Eng Struct. 2018;175(15):765–75.10.1016/j.engstruct.2018.08.072 ↗
18. Abdulridha A, Palermo D. Behaviour and modelling of hybrid SMA-steel reinforced concrete slender shear wall. Eng Struct. 2017;147:77–89.10.1016/j.engstruct.2017.04.058 ↗
19. Branco M, Gonçalves A, Guerreiro L, Ferreira J. Cyclic behavior of composite timber-masonry wall in quasi-dynamic conditions reinforced with superelastic damper. Construct Build Mater. 2014;52:166–76.10.1016/j.conbuildmat.2013.10.095 ↗
20. Shahverdi M, Michels J, Czaderski C, Motavalli M. Iron-based shape memory alloy strips for strengthening RC members: material behavior and characterization. Construct Build Mater. 2018;173:586–99.10.1016/j.conbuildmat.2018.04.057 ↗
21. Mas B, Giggs D, Vieito I, Cladera A, Shaw J, Martínez-Abella F. Superelastic shape memory alloy cables for reinforced concrete applications. Construct Build Mater. 2017;148:307–20.10.1016/j.conbuildmat.2017.05.041 ↗
22. Choi E, Hu JW, Lee JH, Cho B. Recovery stress of shape memory alloy wires induced by hydration heat of concrete in reinforced concrete beams. Eng Struct. 2015;26(1):29–37.10.1177/1045389X13519005 ↗
23. Lee JH, Cho B, Choi E, Kim YH. Experimental study of the reinforcement effect of macro-type high strength polypropylene on the flexural capacity of concrete. Construct Build Mater. 2016;126:967–75.10.1016/j.conbuildmat.2016.09.017 ↗
24. Liang H, Li S, Lu Y, Hu J, Liu Z. Electrochemical performance of corroded reinforced concrete columns strengthened with fiber reinforced polymer. Compos Struct. 2019;207:576–88.10.1016/j.compstruct.2018.09.028 ↗
25. Lee JH, Hu JW, Kang JW. Effects of blades inside a nozzle on the fiber orientation and distribution in fiber-reinforced cement-based materials. Compos Struct. 2019;221:1–12.10.1016/j.compstruct.2019.04.057 ↗
26. Wang JY, Gao XL, Yan JB. Developments and mechanical behaviors of steel fiber reinforced ultra-lightweight cement composite with different densities. Construct Build Mater. 2018;171:643–53.10.1016/j.conbuildmat.2018.03.168 ↗
27. Lee JH, Cho B, Kim JB, Lee KJ, Jung CY. Shear capacity of cast-in headed anchors in steel fiber-reinforced concrete. Eng Struct. 2018;171:421–32.10.1016/j.engstruct.2018.05.106 ↗
28. Zheng Q, Dong P, Li Z, Han X, Zhou C, An M, et al. Mechanical characterizations of braided composite stents made of helical polyethylene terephthalate strips and NiTi wires. Nanotechnol Rev. 2019;8(1):168–74.10.1515/ntrev-2019-0016 ↗
29. Gao Y, Jing H, Zhou Z. Fractal analysis of pore structures in graphene oxide–carbon nanotube based cementitious pastes under different ultrasonication. Nanotechnol Rev. 2019;8(1):107–15.10.1515/ntrev-2019-0010 ↗
30. Zhang P, Li Q, Wang J, Shi Y, Ling Y. Effect of PVA fiber on durability of cementitious composite containing nano-SiO2. Nanotechnol Rev. 2019;8(1):116–27.10.1515/ntrev-2019-0011 ↗
31. Lee KJ, Lee JH, Jung CY, Choi E. Crack-closing performance of NiTi and NiTiNb fibers in cement mortar beams using shape memory effects. Compos Struct. 2018;202:710–8.10.1016/j.compstruct.2018.03.080 ↗
32. Lee JH, Lee KJ, Choi E. Flexural capacity and crack-closing performance of NiTi and NiTiNb shape-memory alloy fibers randomly distributed in mortar beams. Composites Part B. 153:264–76.10.1016/j.compositesb.2018.06.030 ↗
33. Pazhanivel K, Bhaskar GB, Elayaperumal A, Anandan P, Arunachalam S. Influence of Ni–Ti shape memory alloy short fibers on the flexural response of glass fiber reinforced polymeric compositeset. Appl Sci. 2019;1:789.
34. Xu R, Bouby C, Zahrouni H, Zineb TB, Hu H, Potier-Ferry M. 3D modeling of shape memory alloy fiber reinforced composites by multiscale finite element method. Compos Struct. 2018;200:408–19.10.1016/j.compstruct.2018.05.108 ↗
35. Jani JM, Leary M, Subic A. Designing shape memory alloy linear actuators: a review. J Intel Mater Syst Struct. 2017;28(13):1699–718.10.1177/1045389X16679296 ↗
36. Kighuta K. Investigation of the flexual capacity and crack-closing effects in mortar beams reinforced with shape memory alloy fibers, Master thesis, Daegu Univeristy, 2018.
37. ACI 544.4R-88. Design considerations for steel fiber reinforced concrete, American Concrete Institute. West Conshonocken; 1988 (reapproved 1999).
38. Henager CH, Doherty TJ. Analysis of reinforced fibrous concrete beams. Proceedings ASCE; 1976, 12(ST-l). p. 177–88.10.1061/JSDEAG.0004254 ↗
39. Hameed R, Sellier A, Turatsinze A, Duprat F. Flexural behaviour of reinforced fibrous concrete beams: experiments and analytical modelling. Pakistan J Eng Appl Sci. 2013;13:19–28.
40. Swamy RN, Al-Taan SA. Deformation and ultimate strength in flexure of reinforced concrete beams made with steel fiber concrete. ACI J. 1981;78–36:395–405.10.14359/10525 ↗
41. ASTM C 1609. Standard test method for flexural performance of fiber reinforced concrete. West Conshonocken: American Society of Testing Material; 2007.