journal article·2021-12-07Open access

Mechanical, morphological, and fracture-deformation behavior of MWCNTs-reinforced (Al–Cu–Mg–T351) alloy cast nanocomposites fabricated by optimized mechanical milling and powder metallurgy techniques

Shubham Sharma, Vikas Patyal, P. Sudhakara, Jujhar Singh, Michal Petru, R. A. Ilyas

Nanotechnology Reviews· Volume 11· Issue 1

Abstract

Abstract The carbon nanotube (CNT) is becoming more popular due to their low-density, high-strength etc. Among CNTs, multi-walled carbon nanotubes (MWCNTs) are gaining more importance due to their enhanced thermal and electrical conductivity. The present research is exploring the applicability of MWCNTs reinforced with AA2024-T351 alloys for electromechanical applications. This study is currently undertaken for using MWCNTs as a reinforcing particulate for the purpose to enhance the characteristics including low density, high strength, and hardness together with excellent thermal and electrical conductivity of the aluminum alloy matrices. Therefore, this article provides a state-of-the-art experimental approach to fabricate and furthermore, to evaluate the mechanical characteristics, microstructural analysis, and fatigue behavior of Al–Cu–Mg–T351/MWCNT composites under both the mechanical and thermal loading by utilizing powder technology processing route. The uniform dispersion of CNTs has been exposed using ball milling process. Results revealed that the MWCNTs provide extraordinary synergistic strength, enhances fatigue resistance, creep resistance, ductility, and other mechanical characteristics of the aluminum-based composites. The mechanical loading of the composite exhibited increased properties as compared to thermal-loaded aluminum-MWCNT composites. Findings conclude that the maximum hardness of 35Hv obtained for sintered AA2024-T351 and 45Hv for 0.5% MWCNT heat-treated samples indicate that the addition of MWCNT enhances the hardness which may be because CNT is evenly dispersed at the interfacial space. Maximum UTS of 105.21 MPa was obtained with 0.5% MWCNT for sintered composites. Microstructural analysis of the Al–Cu–Mg–T351/MWCNTs composite exhibits reasonably uniform distribution, void formation, and good interfacial bonding. X-ray Diffraction method patterns of fabricated composite shows that the CNT is present at 2 β = 23.6 and 44.6°, whereas high peaks of aluminum are present at uniform dispersed positions. Transmission electron magnifying instrument study further substantiates the above research. Fracture micrographs of the Al–Cu–Mg–T351/MWCNTs composite portray the resistant nature of the nanotubes due to the presence of CNTs, Al–Cu, and aluminum carbide elements in the alloy and the reactions that happened during heat treatment. This significant improvement was attributed to the shear interactions among the constituents and high load carrying capacity of the CNT, uniform dispersion, and interface bond strength among the matrix and constituents. The findings in the study will undoubtedly be beneficial for the development of high-strength, MWCNTs/Al–Cu–Mg–T351, matrix composites in future for multifunctional applications on broader spectrum.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Electromagnetic wave absorption materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

CSIR-Central Leather Research Institute, Regional Centre for Extension and Development, Leather Complex, Kapurthala Road, Jalandhar , Punjab 144021 , India

PhD Research Scholar, IK Gujral Punjab Technical University, Jalandhar-Kapurthala Highway, VPO, Ibban , Punjab 144603 , India

Department of Design and Manufacturing, Shaurya Aeronautics Private Limited Institute , New Delhi , India

IK Gujral Punjab Technical University, Jalandhar-Kapurthala Highway, VPO, Ibban , Punjab 144603 , India

Faculty of Mechanical Engineering, Technical University of Liberec , Studentská 2 , 461 17 Liberec , Czech Republic

School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia , Johor Bahru 81310 , Johor , Malaysia

Centre for Advanced Composite Materials, Universiti Teknologi Malaysia , Johor Bahru 81310 , Johor , Malaysia

References (100+)

Show source-provided references
1. Dong SR, Tu JP, Zhang XB. An investigation of the sliding wear behavior of Cu-matrix composite reinforced by carbon nanotubes. Mater Sci Eng A. 2001;313(1–2):963–70.10.1016/S0921-5093(01)00963-7 ↗
2. Jintakosol T, Kumfu S, Singjai P, Busabok C, Mai C. Effect of wear tests on silicon carbide nanowires/aluminium metal powder composites. Chiang Mai J Sci. 2012;39:41–8.
3. Bartolucci Stephen F, Paras J, Rafiee MA, Rafiee J, Lee S, Kapoor D, et al. Graphene-aluminum nanocomposites. Mater Sci Eng A. 2011;528(27):7933–7.10.1016/j.msea.2011.07.043 ↗
4. Choi H, Kwon G, Lee G, Bae D. Reinforcement with carbon nanotubes in aluminum matrix composites. Scr Materialia. 2008;59(3):360–3.10.1016/j.scriptamat.2008.04.006 ↗
5. Kwangmin C, Jiyeon S, Donghyun B, Choi H. Mechanical properties of aluminum-based nanocomposite reinforced with fullerenes. Trans Nonferrous Met Soc China. 2014;24:47–52.10.1016/S1003-6326(14)63287-8 ↗
6. Bradbury CR, Gomon JK, Kollo L, Kwon H, Leparoux M. Hardness of Multi Wall Carbon Nanotubes reinforced aluminium matrix composites. J Alloy Compd. 2014;585:362–7.10.1016/j.jallcom.2013.09.142 ↗
7. Bakshi Srinivasa R, Singh V, Seal S, Agarwal A. Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders. Surf Coat Technol. 2009;203:1544–54.10.1016/j.surfcoat.2008.12.004 ↗
8. Elshalakany AB, Osman TA, Khattab A, Azzam B, Zaki M. Microstructure and mechanical properties of MWCNTs reinforced A356 aluminum alloys cast nanocomposites fabricated by using a combination of rheocasting and squeeze casting techniques. J Nanomaterials. 2014;2014:1–4.10.1155/2014/386370 ↗
9. Kurita H, Kwon H, Estili M, Kawasaki A. Multi-walled carbon nanotube-aluminum matrix composites prepared by combination of hetero-agglomeration method, spark plasma sintering and hot extrusion. Mater Trans. 2011;52(10):1960–5.10.2320/matertrans.M2011146 ↗
10. Abbass M, Fouad M. A study of wear behavior of aluminum alloy matrix nanocomposites fabricated by powder technology. Eng Tech J. 2014;32:1720–32.10.30684/etj.32.7A9 ↗
11. Stein J, Lenczowski B, Anglaret E, Fréty N. Influence of the concentration and nature of carbon nanotubes on the mechanical properties of AA5083 aluminium alloy matrix composites. Carbon. 2014;77:44–52.10.1016/j.carbon.2014.05.001 ↗
12. Kim HH, Babu JSS, Kang CG. Fabrication of A356 aluminum alloy matrix composite with CNTs/Al2O3 hybrid reinforcements. Mater Sci Eng: A. 2013;573:92–9.10.1016/j.msea.2013.02.041 ↗
13. Liao J, Tan MJ. A simple approach to prepare Al/CNT composite: spread-dispersion (SD) method. Mater Lett. 2011;65:2742–4.10.1016/j.matlet.2011.05.067 ↗
14. Choi HJ, Lee SM, Bae DH. Wear characteristic of aluminum-based composites containing multi-walled carbon nanotubes. Wear. 2010;270:12.10.1016/j.wear.2010.08.024 ↗
15. Stein J, Lenczowski B, Fr´ety N, Anglaret E. Mechanical reinforcement of a high-performance aluminium alloy AA5083 with homogeneously dispersed multi-walled carbon nanotubes. Carbon. 2012;50(6):2264–72.10.1016/j.carbon.2012.01.044 ↗
16. Fukuda H, Szpunar JA, Kondoh K, Chromik R. The influence of carbon nanotubes on the corrosion behaviour of AZ31B magnesium alloy. Corros Sci. 2010;52(12):3917–23.10.1016/j.corsci.2010.08.009 ↗
17. Tak HS, Ha CS, Lee HJ, Lee HW, Jeong YK, Kang MC. Characteristic evaluation of Al2O3/CNTs hybrid materials for micro-electrical discharge machining. Trans Nonferrous Met Soc China. 2011;21(11):s28–32.10.1016/S1003-6326(11)61055-8 ↗
18. Kim HH, Babu JSS, Kang CG. Hot extrusion of A356 aluminum metal matrix composite with carbon nanotube/Al2O3 hybrid reinforcement. Metall Mater Trans A. 2014;45(5):2636–45.10.1007/s11661-014-2185-5 ↗
19. Wu Y, Kim GY. Carbon nanotube reinforced aluminum composite fabricated by semi-solid powder processing. J Mater Process Technol. 2011;211:1341–1.10.1016/j.jmatprotec.2011.03.007 ↗
20. Bakshi Srinivasa R, Agarwal A. An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites. Carbon. 2011;49(2):533–44.10.1016/j.carbon.2010.09.054 ↗
21. Li Q, Rottmair CA, Singer RF. CNT reinforced light metal composites produced by melt stirring and by high pressure die casting. Compos Sci Technol. 2010;70(16):2242–7.10.1016/j.compscitech.2010.05.024 ↗
22. Kondoh K, Fukuda H, Umeda J, Imai H, Fugetsu B. Microstructural and mechanical behavior of multi-walled carbon nanotubes reinforced Al-Mg-Si alloy composites in aging treatment. Carbon. 2014;72:15–21.10.1016/j.carbon.2014.01.013 ↗
23. Kang K, Bae G, Kim B, Lee C. Thermally activated reactions of multi-walled carbon nanotubes reinforced aluminum matrix composite during the thermal spray consolidation. Mater Chem Phys. 2012;133(1):495–9.10.1016/j.matchemphys.2012.01.071 ↗
24. Gupta A, Tripathi G, Basu B, Balani K. Dependence of protein adsorption on wetting behavior of UHMWPE-HA-Al2O3-CNT hybrid biocomposites. JOM. 2012;64(4):506–13.10.1007/s11837-012-0295-3 ↗
25. Thakur SK, Kwee GT, Gupta M. Development and characterization of magnesium composites containing nano-sized silicon carbide and carbon nanotubes as hybrid reinforcements. J Mater Sci. 2007;42(24):10040–6.10.1007/s10853-007-2004-0 ↗
26. Goh CS, Wei J, Lee LC, Gupta M. Ductility improvement and fatigue studies in Mg-CNT nanocomposites. Compos Sci Technol. 2008;68(6):1432–9.10.1016/j.compscitech.2007.10.057 ↗
27. Esawi AMK, Morsi K, Sayed A, Taher M, Lanka S. Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites. Compos Sci Technol. 2010;70(16):2237–41.10.1016/j.compscitech.2010.05.004 ↗
28. Kwon H, Saarna M, Yoon S, Weidenkaff A, Leparoux M. Effect of milling time on dual-nanoparticulate-reinforced aluminum alloy matrix composite materials. Mater Sci Engineering: A. 2014;590:338–45.10.1016/j.msea.2013.10.046 ↗
29. Nam DH, Kim YK, Cha SI, Hong SH. Effect of CNTs on precipitation hardening behavior of CNT/Al–Cu composites. Carbon. 2012;50(13):4809–14.10.1016/j.carbon.2012.06.005 ↗
30. Akbarpour MR, Salahi E, Hesari F, Simchi A, Kim HS. Fabrication, characterization and mechanical properties of hybrid composites of copper using the nanoparticulates of SiC and carbon nanotubes. Mater Sci Eng A. 2013;572:83–90.10.1016/j.msea.2013.02.039 ↗
31. Kwon H, Park DH, Silvain JF, Kawasaki A. Investigation of carbon nanotube reinforced aluminum matrix composite materials. Compos Sci Technol. 2010;70(3):546–50.10.1016/j.compscitech.2009.11.025 ↗
32. Kuzumaki T, Miyazawa K, Ichinose H, Ito K. Processing of carbon nanotube reinforced aluminum composite. J Mater Res. 1998;13(9):2445–9.10.1557/JMR.1998.0340 ↗
33. Xu CL, Wei BQ, Ma RZ, Liang J, Ma XK, Wu DH. Fabrication of aluminum-carbon nanotube composites and their electrical properties. Carbon NY. 1999;37:855–8.10.1016/S0008-6223(98)00285-1 ↗
34. Esawi AMK, Morsi K, Sayed A, Taher M, Lanka S. Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites. Compos Sci Technol. 2010;70(16):2237–41.10.1016/j.compscitech.2010.05.004 ↗
35. Zhang XX, Wei HM, Li AB, Fu YD, Geng L. Effect of hot extrusion and heat treatment on CNTs-Al interfacial bond strength in hybrid aluminium composites. Compos Interfaces. 2013;20:231.10.1080/15685543.2013.793093 ↗
36. Zhao K, Liu ZY, Xiao BL, Ni DR, Ma ZY. Origin of insignificant strengthening effect of CNTs in T6-treated CNT/6061Al composites. Acta Metall Sin (Engl Lett). 2018;31:134–42.10.1007/s40195-017-0626-z ↗
37. Choudhary V, Singh BP, Mathur RB. In: Satoru Suzuki, editor, Syntheses and applications of carbon nanotubes and their composites. chapter: carbon nanotubes and their composites. Satoru Suzuki Synth. Appl. Carbon Nanotubes. their Compos. London, UK: Intech Open Science; 2013. p. 193–222.10.5772/52897 ↗
38. Ruoff RS, Lorents DC. Mechanical and thermal properties of carbon nanotubes. Carbon. 1995;33(7):925–30.10.1016/0008-6223(95)00021-5 ↗
39. Jackman H. Available from: https://doi.org/urn:nbn:se:kau
40. Majid M, Majzoobi GH, Noozad GA, Reihani A, Mortazavi SZ, Gorji MS. Fabrication and mechanical properties of MWCNTs-reinforced aluminum composites by hot extrusion. Rare Met. 2012;31(4):372–8.10.1007/s12598-012-0523-6 ↗
41. Srivastava D, Wei C, Cho K. Nanomechanics of carbon nanotubes and composites. Appl Mech Rev. 2003;56(2):215–30.10.1115/1.1538625 ↗
42. Abdalla S, Al-Marzouki F, Al-Ghamdi AA, Abdel-Daiem A. Different technical applications of carbon nanotubes. Nanoscale Res Lett. 2015;10(1):358–8.10.1186/s11671-015-1056-3 ↗
43. Yumura M. Carbon nanotube industrial applications. Japan: AIST Today International Edition; 2003. p. 10.
44. Liao J, Tan MJ. Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use. Powder Technol. 2011;208(1):42–8.10.1016/j.powtec.2010.12.001 ↗
45. Choi H, Shin J, Min B, Park J, Bae D. Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites. J Mater Res. 2009;24(8):2610–6.10.1557/jmr.2009.0318 ↗
46. Kurita H, Kwon H, Estili M, Kawasaki A. Multi-walled car-bon nanotube-aluminum matrix composites prepared by combination of hetero-agglomeration method, spark plasma sintering and hot extrusion. Mater Trans. 2011;52(10):1960–5.10.2320/matertrans.M2011146 ↗
47. Moghadam AD, Omrani E, Menezes PL, Rohatgi PK. Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene–a review. Compos B Eng. 2015;77:402–20.10.1016/j.compositesb.2015.03.014 ↗
48. Papageorgiou DG, Li Z, Liu M, Kinloch IA, Young RJ. Mechanisms of mechanical reinforcement by graphene and carbon nanotubes in polymer nanocomposites. Nanoscale. 2020;12(4):2228–67.10.1039/C9NR06952F ↗
49. Liu ZY, Xiao BL, Wang WG, Ma ZY. Tensile strength and electrical conductivity of carbon nanotube reinforced aluminum matrix composites fabricated by powder metallurgy combined with friction stir processing. J Mater Sci Technol. 2014;30:649–55.10.1016/j.jmst.2014.04.016 ↗
50. Esawi A, Morsi K. Dispersion of carbon nanotubes (CNTs) in aluminum powder. Compos A Appl Sci Manuf. 2007;38(2):646–50.10.1016/j.compositesa.2006.04.006 ↗
51. Jafari M, Abbasi MH, Enayati MH, Karimzadeh F. Mechanical properties of nanostructured Al2024-MWCNT composite prepared by optimized mechanical milling and hot-pressing methods. Adv Powder Technol. 2012;23(2):205–10.10.1016/j.apt.2011.02.008 ↗
52. Agarwal A, Bakshi SR, Lahiri D. Carbon nanotubes reinforced metal matrix composites. First edn. Boca Raton, FL, USA: CRC Press; 2011.
53. Ali MH, Rubel RI. A comparative review of Mg/CNTs and Al/CNTs composite to explore the prospect of bimetallic Mg-Al/CNTs composites. AIMS Mater Sci. 2020;7(3):217–43.10.3934/matersci.2020.3.217 ↗
54. Hussain MD, Khan U, Chanda A, Jangid R. Fabrication and hardness analysis of F-MWCNTs reinforced aluminium nanocomposite. Proc Eng. 2016;173:1611–8.10.1016/j.proeng.2016.12.262 ↗
55. ASTM, E92 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials, ASTM B. Stand, 2017. Available from: 10.1520/E0092-16.Copyright.
56. S E8/E8m. Tension Testing of Metallic Materials, ASTM Int, 2016.
57. Kurita H, Estili M, Kwon H, Miyazaki T, Zhou W, Silvain JF, et al. Load-bearing contribution of multi-walled carbon nanotubes on tensile response of aluminum. Compos A Appl Sci Manuf. 2015;68:133–9.10.1016/j.compositesa.2014.09.014 ↗
58. Housaer F, Legris A, B´eclin F, Touzin M, Tingaud D, Ji G, et al. Characterization of Al/MWCNTs composites prepared by powder metallurgy routes. MATEC Web Conf. 2013;7:1–3.10.1051/matecconf/20130701002 ↗
59. Goh CS, Wei J, Lee LC, Gupta M. Development of novel carbon nanotube reinforced magnesium nanocomposites using the powder metallurgy technique. Nanotechnology. 2006;17(1):7–12.10.1088/0957-4484/17/1/002 ↗
60. Sridhar I, Narayanan KR. Processing and characterization of MWCNT reinforced aluminum matrix composites. J Mater Sci. 2009;44(7):1750–6.10.1007/s10853-009-3290-5 ↗
61. Laha T, Agarwal A. Effect of sintering on thermally sprayed carbon nanotube reinforced aluminum nanocomposite. Mater Sci Eng A. 2008;480(1–2):323–32.10.1016/j.msea.2007.07.047 ↗
62. Sharma N, Syed AN, Ray BC, Yadav S, Biswas K. Alumina-MWCNT composites: microstructural characterization and mechanical properties. J Asian Ceram Societies. 2019;7(1):1–19.10.1080/21870764.2018.1552235 ↗
63. Suk ME. Enhanced tensile properties of weight-reduced nanoporous carbon nanotube-aluminum composites. Mater Express. 2019;9(7):801–7.10.1166/mex.2019.1561 ↗
64. Bunakov NA, Kozlov DV, Golovanov VN, Klimov ES, Grebchuk EE, Efimov MS, et al. Fabrication of multi-walled carbon nanotubes-aluminum matrix composite by powder metallurgy technique. Results Phys. 2016;6:231–2.10.1016/j.rinp.2016.04.013 ↗
65. Esawi AMK, Morsi K, Sayed A, Taher M, Lanka S. The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT-reinforced aluminium composites. Compos A Appl Sci Manuf. 2011;42(3):234–43.10.1016/j.compositesa.2010.11.008 ↗
66. Choi H, Wang L, Cheon D, Lee W. Preparation by mechanical alloying of Al powders with single-, double-, and multi-walled carbon nanotubes for carbon/metal nanocomposites. Compos Sci Technol. 2013;74:91–8.10.1016/j.compscitech.2012.10.011 ↗
67. Ci L, Ryu Z, Jin-Phillipp NY, Ru¨hle M. Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminum. Acta Mater. 2006;54(20):5367–75.10.1016/j.actamat.2006.06.031 ↗
68. Patil RG, Chatpalli V, Kannan KR. Study on Young’s modulus and microhardness of carbon nanotubes reinforced copper nanocomposite. Mater Sci Technol. 2010;26(4):478–81.10.1179/026708309X12468927349497 ↗
69. Kwon H, Cho S, Leparoux M, Kawasaki A. Dual-nanoparticulate-reinforced aluminum matrix composite materials. Nanotechnology. 2012;23(22):225704.10.1088/0957-4484/23/22/225704 ↗
70. Soni SK, Thomas B. Influence of TiO2 and MWCNT nanoparticles dispersion on microstructure and mechanical properties of Al6061 matrix hybrid nanocomposites. Mater Res Express. 2020;6(12):1265–8.10.1088/2053-1591/ab5dfe ↗
71. George R, Kashyap KT, Rahul R, Yamdagni S. Strengthening in carbon nanotube/aluminium (CNT/Al) composites. Scr Materialia. 2005;53(10):1159–63.10.1016/j.scriptamat.2005.07.022 ↗
72. Kim KT, Eckert J, Menzel SB, Gemming T, Hong SH. Grain refinement assisted strengthening of carbon nanotube reinforced copper matrix nanocomposites. Appl Phys Lett. 2008;92(12):121901.10.1063/1.2899939 ↗
73. Li H, Misra A, Horita Z, Koch CC, Mara NA, Dicker-son PO, et al. Strong and ductile nanostructured Cu-carbon nanotube composite. Appl Phys Lett. 2009;95(7):71907.10.1063/1.3211921 ↗
74. Yuan C, Tan Z, Fan G, Chen M, Zheng Q, Li Z. Fabrication and mechanical properties of CNT/Al composites via shift-speed ball milling and hot-rolling. J Mater Res. 2019;34(15):2609–19.10.1557/jmr.2019.219 ↗
75. Billah MM, Chen Q. Al-CNT-Ni composite with significantly increased strength and hardness. SN Appl Sci. 2019;1:1–6.10.1007/s42452-019-0530-4 ↗
76. Kundalwal SI, Rathi A. Improved mechanical and viscoelastic proper ties of CNT-composites fabricated using an innovative ultrasonic dual mixing technique. J Mech Behav Mater. 2020;29(1):77–85.10.1515/jmbm-2020-0008 ↗
77. Fathi MSA. Mechanical properties of nanocomposite materials: A. Rev J Southwest Jiaotong Univ. 2020;1:55.10.35741/issn.0258-2724.55.1.10 ↗
78. Shivaramu HT, Nayak V, Umashankar KS. Dry sliding wear characteristics of multi-walled carbon nanotubes reinforced Al-Si (LM6) alloy nanocomposites produced by powder metallurgy technique. Mater Res Express. 2020;7(4):45001.10.1088/2053-1591/ab825c ↗
79. Carneiro I, Simões S. Effect of morphology and structure of MWCNTs on metal matrix nanocomposites. Materials. 2020;13(23):5557.10.3390/ma13235557 ↗
80. Feijoo I, Pena G, Cabeza M, Cristóbal MJ, Rey P. MWCNT-reinforced AA7075 composites: effect of reinforcement percentage on mechanical properties. Metals. 2021;11(6):969.10.3390/met11060969 ↗
81. Pérez-Bustamante R, González-Ibarra MJ, González-Cantú J, Estrada-Guel I, Herrera-Ramírez JM, Miki-Yoshida M, et al. AA2024-CNTs composites by milling process after T6-temper condition. J Alloy Compd. 2012;536:17–20.10.1016/j.jallcom.2011.12.001 ↗
82. Pérez-Bustamante R, Pérez-Bustamante F, Estrada-Guel I, Santillán-Rodríguez CR, Matutes-Aquino JA, Herrera-Ramírez JM, et al. Characterization of Al2024-CNTs composites produced by mechanical alloying. Powder Technol. 2011;212(3):390–6.10.1016/j.powtec.2011.06.007 ↗
83. Lipecka J, Andrzejczuk M, Lewandowska M, Janczak-Rusch J, Kurzydlowski KJ. Evaluation of thermal stability of ultrafine grained aluminium matrix composites reinforced with carbon nanotubes. Compos Sci Technol. 2011;71(16):1881–5.10.1016/j.compscitech.2011.09.001 ↗
84. Uriza-Vega E, Carrenõ-Gallardo C, López-Meléndez C, Cuadros-Lugo E, Pérez-Bustamante R, Ledezma-Sillas E, et al. Mechanical behavior of multiwalled carbon nanotube reinforced 7075 aluminum alloy composites prepared by mechanical milling and hot extrusion. Mater Res. 2019;22–2.10.1590/1980-5373-mr-2018-0652 ↗
85. Tserpes K, Chanteli A, Pantelakis S, Koumoulos EP, Charitidis CA. Mechanical and nanomechanical properties of MWCNT/PP nanocomposite. Frattura ed Integrit’a Strutturale. 2018;12(46):73–83.10.3221/IGF-ESIS.46.08 ↗
86. Devadiga U, Fernandes P. Taguchi analysis for sliding wear characteristics of carbon nanotube-fly ash reinforced aluminium nanocomposites. Heliyon. 2021;7(2):6170.10.1016/j.heliyon.2021.e06170 ↗
87. Chohan JS, Mittal N, Kumar R, Singh S, Sharma S, Dwivedi SP, et al. Optimization of FFF process parameters by naked mole-rat algorithms with enhanced exploration and exploitation capabilities. Polymers. 2021;13(11):1702–2.10.3390/polym13111702 ↗
88. Kumar J, Singh D, Kalsi NS, Sharma S, Pruncu CI, Pimenov DY, et al. Comparative study on the mechanical, tribological, morphological and structural properties of vortex casting processed, Al-SiC-Cr hybrid metal matrix composites for high strength wear-resistant applications: Fabrication and characterizations. J Mater Res Technol. 2020;9(6):13607–15.10.1016/j.jmrt.2020.10.001 ↗
89. Dwivedi SP, Saxena A, Sharma S. Influence of nano-CuO on synthesis and mechanical behavior of spent alumina catalyst and grinding sludge reinforced aluminum based composite. Int J Metalcasting. 2021;13:1–18. 10.1007/s40962-021-00597-5.10.1007/s40962-021-00597-5 ↗
90. Sivalingam P, Krishnaraj V, Sharma S, Mouleeswaran SK, Kumar RJ, Zitoune R. Experimental study on thermal and morphological analysis of green composite sandwich made of flax and agglomerated cork. J Therm Anal Calorim. 2020;139:3003–12.10.1007/s10973-019-08691-x ↗
91. Muni RN, Singh J, Kumar V, Sharma S. Parametric optimization of rice husk ash, copper, magnesium reinforced aluminium matrix hybrid composite processed by EDM. ARPN J Eng Appl Sci. 2019;14(22):1828–34.
92. Muni RN, Singh J, Kumar V, Sharma S. Influence of rice husk ash, Cu, Mg on the mechanical behaviour of Aluminium Matrix hybrid composites. Int J Appl Eng Res. 2019;14(8):1828–34.
93. Dwivedi SP, Saxena A, Sharma S, Srivastava AK, Maurya NK. Influence of SAC and eggshell addition in the physical, mechanical and thermal behaviour of Cr reinforced aluminium based composite. Int J Cast Met Res 2021;34(1):43–55.10.1080/13640461.2021.1877943 ↗
94. Saxena A, Dwivedi SP, Dixit A, Sharma S, Srivastava AK, Maurya NK. Computational and experimental investigation on mechanical behavior of zirconia toughened alumina and nickel powder reinforced EN31 based composite material. Materialwissenschaft und Werkstofftechnik. 2021;52(5):548–60.10.1002/mawe.202000152 ↗
95. Sharma S, Singh J, Gupta MK, Mia M, Dwivedi SP, Saxena A, et al. Investigation on mechanical, tribological and microstructural properties of Al-Mg-Si-T6/SiC/muscovite-hybrid metal-matrix composites for high strength applications. J Mater Res Technol. 2021;12(21):1564–81.10.1016/j.jmrt.2021.03.095 ↗
96. Dwivedi SP, Agrawal R, Sharma S. Effect of friction stir process parameters on mechanical properties of chrome containing leather waste reinforced aluminium based composite. Int J Precis Eng Manufacturing-Green Technol. 2021;8(3):935–43.10.1007/s40684-021-00312-z ↗
97. Kumar J, Singh D, Kalsi NS, Sharma S, Mia J, Singh M, et al. Investigation on the mechanical, tribological, morphological and machinability behavior of stir-casted Al/SiC/Mo reinforced MMCs. J Mater Res Technol. 2021;12:930–46.10.1016/j.jmrt.2021.03.034 ↗
98. Aggarwal V, Singh J, Sharma S, Sharma A, Singh G, Parshad J. Empirical modeling of machining parameters during WEDM of Inconel 690 using response surface methodology. AIP Conference Proceedings. Vol. 2281; 2020. p. 020032. 10.1063/5.0027284.10.1063/5.0027284 ↗
99. Aggarwal V, Singh J, Sharma S, Harish K, Garg A, Sharma G, et al. An experimental study of wire breakage frequency on different electrodes during WEDM of Inconel-722. IOP Conf Series: Mater Sci Eng. 2020;954:12013.10.1088/1757-899X/954/1/012013 ↗
100. Aggarwal V, Pruncu CI, Singh J, Sharma S, Pimenov DY. Empirical investigations during WEDM of Ni-27Cu-3.15Al- 2Fe-1.5Mn based superalloy for high temperature corrosion resistance applications. Materials. 2020;13(16):3470.10.3390/ma13163470 ↗