Synthesis and characterization of pure and nanosized hydroxyapatite bioceramics
Source abstract
Abstract
Abstract Synthetic nanosized hydroxyapatite (HA) particles (<120 nm) were prepared using a co-precipitation technique by adopting two different routes – one from an aqueous solution of calcium nitrate tetrahydrate and diammonium hydrogen phosphate at pH 10 and the other by using calcium hydroxide and phosphoric acid as precursors at pH 8.5 and reaction temperature of 50°C. The lattice parameters of HA nanopowder were analogous to reference [Joint Committee on Powdered Diffraction Standards (JCPDS)] pattern no. 09-432. No decomposition of HA into other phases was observed even after heating at 1000°C in air for 1 h. This observation revealed the high-temperature stability of the HA nanopowder obtained using co-precipitation route. The effects of preliminary Ca/P molar ratio, precipitation, pH and temperature on the evolution of phase and crystallinity of the nanopowder were systematically examined and optimized. The product was evaluated by techniques such as X-ray-diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) and Raman spectroscopy analyses. The chemical structural analysis of the as-prepared HA sample was performed using X-ray photoelectron spectroscopy (XPS). After heat treatment at 1000°C for 1 h and ageing for 15 h, the product was obtained as a phase-pure, highly crystalline HA nanorods.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
1Department of Basic Sciences and Humanities, University of Engineering and Technology, KSK Campus, GT Road, Lahore, Pakistan
2Department of Chemistry, University of Engineering and Technology, GT Road, Lahore, Pakistan
References (60)
Show source-provided references
1. Investigations on the formation mechanism of hydroxyapatite synthesized by the solvothermal method10.1088/0957-4484/17/17/020 ↗
2. The challenge of orthopaedic materials10.1054/cuor.1999.0074 ↗
3. Designing of nanostructured hollow TiO2 spheres obtained by ultrasonic spray pyrolysis10.1016/j.jcis.2004.06.008 ↗
4. Physico-chemical properties of nano-sized hexagonal hydroxyapatite powder synthesized by sol-gel
5. Some important factors in the wet precipitation process of hydroxyapatite10.1016/S0261-3069(03)00003-7 ↗
6. Solid state synthesis of calcium borohydroxyapatite10.1016/j.solidstatesciences.2011.08.016 ↗
7. 2010 · vol. 9 · 699
8. Zinc-substituted hydroxyapatite: a biomaterial with enhanced bioactivity and antibacterial properties10.1007/s10856-012-4817-x ↗
9. 1993 · Vol.1
10. Synthesis and characterization of hydroxyapatite powder by sol-gel method for biomedical application
11. Nanocrystalline hydroxyapatite and zinc-doped hydroxyapatite as carrier material for controlled delivery of ciprofloxacin
12. Hydroxyapatite synthesis methodologies: an overview
13. Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies
14. MicroRaman spectral study of the PO4 and CO3 vibrational modes in synthetic and biological apatites10.1007/s002239900561 ↗
15. Kinetics of HA precipitation at pH 10-110.1016/S0142-9612(00)00166-6 ↗
16. 2008
17. Synthesis, characterization and antimicrobial activity of copper and zinc-doped hydroxyapatite nanopowders10.1016/j.apsusc.2010.03.124 ↗
18. Novel hydroxyapatite/carboxymethylchitosan composite scaffolds prepared through an innovative “autocatalytic” electroless coprecipitation route
19. Nanostructure processing of HA based bioceramics10.1021/nl0055299 ↗
20. Fabrication of HA bodies by uniaxial pressing from a precipitated powder10.1016/S0142-9612(00)00218-0 ↗
21. Biomaterial in total joint replacement10.1016/j.colsurfb.2003.12.002 ↗
22. Biomaterial in total joint replacement10.1016/j.colsurfb.2003.12.002 ↗
23. Designing of nanostructured hollow TiO2 spheres obtained by ultrasonic spray pyrolysis10.1016/j.jcis.2004.06.008 ↗
24. Investigations on the formation mechanism of hydroxyapatite synthesized by the solvothermal method10.1088/0957-4484/17/17/020 ↗
25. 2010 · vol. 9 · 699
26. Synthesis, structure, and luminescent properties of europium-doped hydroxyapatite nanocrystalline powders
27. Solid state synthesis of calcium borohydroxyapatite10.1016/j.solidstatesciences.2011.08.016 ↗
28. Synthesis and characterization of hydroxyapatite powder by sol-gel method for biomedical application
29. 1993 · Vol.1
30. Bioceramics10.1111/j.1151-2916.1998.tb02540.x ↗
31. Physico-chemical properties of nano-sized hexagonal hydroxyapatite powder synthesized by sol-gel
32. Bioceramics10.1111/j.1151-2916.1998.tb02540.x ↗
33. Some important factors in the wet precipitation process of hydroxyapatite10.1016/S0261-3069(03)00003-7 ↗
34. Synthesis, characterization and antimicrobial activity of copper and zinc-doped hydroxyapatite nanopowders10.1016/j.apsusc.2010.03.124 ↗
35. Metal organic chemical vapour deposition (MOCVD) of bone mineral like carbonated hydroxyapatite coatings
36. The sol-gel process10.1021/cr00099a003 ↗
37. Nanostructure processing of HA based bioceramics10.1021/nl0055299 ↗
38. Synthesis, characterization and gas sensing property of hydroxyapatite ceramic10.1007/BF02706339 ↗
39. Hydroxyapatite synthesis methodologies: an overview
40. Surface characterization of hydroxyapatite and related calcium phosphates by XPS and TOF-SIMS10.1021/ac990812h ↗
41. The sol-gel process10.1021/cr00099a003 ↗
42. Calcium phosphate apatites with variable Ca/P atomic ratio I. Synthesis, characterization and thermal stability of powder
43. 2008
44. Nanosized hydroxyapatite and other calcium phosphates: chemistry of formation and application as drug and gene delivery agents
45. Novel hydroxyapatite/carboxymethylchitosan composite scaffolds prepared through an innovative “autocatalytic” electroless coprecipitation route
46. Calcium phosphate apatites with variable Ca/P atomic ratio I. Synthesis, characterization and thermal stability of powder
47. Zinc-substituted hydroxyapatite: a biomaterial with enhanced bioactivity and antibacterial properties10.1007/s10856-012-4817-x ↗
48. The challenge of orthopaedic materials10.1054/cuor.1999.0074 ↗
49. Nanocrystalline hydroxyapatite and zinc-doped hydroxyapatite as carrier material for controlled delivery of ciprofloxacin
50. Nanosized hydroxyapatite coating on PEEK implants enhances early bone formation: a histological and three-dimensional investigation in rabbit bone10.3390/ma8073815 ↗
51. Metal organic chemical vapour deposition (MOCVD) of bone mineral like carbonated hydroxyapatite coatings
52. Kinetics of HA precipitation at pH 10-110.1016/S0142-9612(00)00166-6 ↗
53. Synthesis, structure, and luminescent properties of europium-doped hydroxyapatite nanocrystalline powders
54. Synthesis of nano sized hydroxyapatite powder using sol-gel technique and its conversion to dense and porous bodies
55. MicroRaman spectral study of the PO4 and CO3 vibrational modes in synthetic and biological apatites10.1007/s002239900561 ↗
56. Synthesis, characterization and gas sensing property of hydroxyapatite ceramic10.1007/BF02706339 ↗
57. Fabrication of HA bodies by uniaxial pressing from a precipitated powder10.1016/S0142-9612(00)00218-0 ↗
58. Nanosized hydroxyapatite coating on PEEK implants enhances early bone formation: a histological and three-dimensional investigation in rabbit bone10.3390/ma8073815 ↗
59. Nanosized hydroxyapatite and other calcium phosphates: chemistry of formation and application as drug and gene delivery agents
60. Surface characterization of hydroxyapatite and related calcium phosphates by XPS and TOF-SIMS10.1021/ac990812h ↗