Research on bond–slip performance between pultruded glass fiber-reinforced polymer tube and nano-CaCO3 concrete
Source abstract
Abstract
Abstract The article describes an experimental study on the bond–slip performance between the pultruded glass fiber-reinforced polymer (GFRP) tube and the nano-CaCO3 concrete. Taking the nano-CaCO3 concrete strength and GFRP tube thickness as primary parameters, nine specimens were designed and tested to study the influence of these parameters on the bond strength of the specimens. Besides, three specimens filled with the ordinary concrete were also tested by using the push-out tests to make comparisons with the bond performance of the specimens filled with nano-CaCO3 concrete. A total of four push-out tests were conducted on each specimen. The experimental results indicate that there are two types of axial load–slip curves for each specimen in four push-out tests. Moreover, comparison of the results of the push-out tests in the same direction shows that the bond failure load of the specimen decreases with the increase in the number of push-out tests. Based on the analysis of the test results, it is shown that the bond performance between the GFRP tube and the nano-CaCO3 concrete is better than that between the GFRP tube and the ordinary concrete. Furthermore, as the nano-CaCO3 concrete strength increases, the bond strength of the specimens decreases, indicating that the concrete strength has a negative effect on the bond strength. When the nano-CaCO3 concrete strength is relatively smaller (C20), the bond strength of the specimens decreases with the increase in the thickness of the GFRP tube. However, when the nano-CaCO3 concrete strength is relatively larger (C30 and C40), the bond strength of the specimens increases as the thickness of the GFRP tube increases.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Civil Engineering , Fuzhou University , Fuzhou , 350116 China
School of Urban Construction , Yangtze University , Jingzhou , 434023 China
References (37)
Show source-provided references
1. Zhuang CL, Chen Y. The effect of nano-SiO2 on concrete properties: a review. Nanotechnol Rev. 2019;8:562–72.10.1515/ntrev-2019-0050 ↗
2. Li ZH, Xu K, Wei F. Recent progress in photodetectors based on low-dimensional nanomaterials. Nanotechnol Rev. 2018;7:393–411.10.1515/ntrev-2018-0084 ↗
3. Pawłowski R, Pawłowski B, Wita H, Pluta A, Sobik P, Sala A, et al. Silver nanoparticles in the thermal silver plating of aluminium busbar joints. Nanotechnol Rev. 2018;7:365–72.10.1515/ntrev-2018-0032 ↗
4. Das S, Ghosh CK, Sarkar CK, Roy S. Facile synthesis of multi-layer graphene by electrochemical exfoliation using organic solvent. Nanotechnol Rev. 2018;7(6):497–508.10.1515/ntrev-2018-0094 ↗
5. Zeidan M, Said AM. Effect of colloidal nano-silica on alkalisilica mitigation. J Sustainable Cem-Based Mater. 2017;6:126–38.10.1080/21650373.2016.1191387 ↗
6. Kontoleontos F, Tsakiridis PE, Marinos A, Kaloidas V, Katsioti M. Influence of colloidal nanosilica on ultrafine cement hydration: Physicochemical and microstructural characterization. Constr Build Mater. 2012;35:347–60.10.1016/j.conbuildmat.2012.04.022 ↗
7. Gupta M, Kumar M. Effect of nano silica and coir fiber on compressive strength and abrasion resistance of concrete. Constr Build Mater. 2019;226:44–50.10.1016/j.conbuildmat.2019.07.232 ↗
8. Zhang MH, Islam J, Peethamparan S. Use of nano-silica to increase early strength and reduce setting time of concretes with high volumes of slag. Cem Concr Compos. 2012;34:650–62.10.1016/j.cemconcomp.2012.02.005 ↗
9. Sun XJ, Zhang H, Meng WJ, Zhang RH, Li KN, Peng T. Primary resonance analysis and vibration suppression for the harmonically excited nonlinear suspension system using a pair of symmetric viscoelastic buffers. Nonlinear Dynam. 2018;94:1243–65.10.1007/s11071-018-4421-9 ↗
10. Guo K, Miao H, Liu L, et al. Effect of graphene oxide on chloride penetration resistance of recycled concrete. Nanotechnol Rev. 2019;8:681–9.10.1515/ntrev-2019-0059 ↗
11. Pacheco-Torgal F, Miraldo S, Ding Y, Labrincha JA. Targeting HPC with the help of nanoparticles: An overview. Constr Build Mater. 2013;38:365–70.10.1016/j.conbuildmat.2012.08.013 ↗
12. Lin QJ, Chen Y, Liu C. Mechanical properties of circular nano-silica concrete filled stainless steel tube stub columns after being exposed to freezing and thawing. Nanotechnol Rev. 2019;8:600–18.10.1515/ntrev-2019-0053 ↗
13. He K, Chen Y, Xie WT. Test on axial compression performance of nano-silica concrete-filled angle steel reinforced GFRP tubular column. Nanotechnol Rev. 2019;8:523–38.10.1515/ntrev-2019-0047 ↗
14. Behfarnia K, Salemi N. The effects of nano-silica and nano-alumina on frost resistance of normal concrete. Constr Build Mater. 2013;48:580–4.10.1016/j.conbuildmat.2013.07.088 ↗
15. Shaikh FUA, Supit SWM. Chloride induced corrosion durability of high volume fly ash concretes containing nano particles. Constr Build Mater. 2015;9:208–25.
16. Shaikh FUA, Supit SWM. Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles. Constr Build Mater. 2014;70:309–21.10.1016/j.conbuildmat.2014.07.099 ↗
17. Liu XY, Chen L, Liu AH, Wang XR. Effect of nano-CaCO3 on properties of cement paste. Energy Procedia. 2012;16:991–6.10.1016/j.egypro.2012.01.158 ↗
18. Mirmiran A, Shahawy M. A new concrete-filled hollow FRP composite column. Compos Part B Eng. 1996;27:263–8.10.1016/1359-8368(95)00019-4 ↗
19. Mirmiran A, Samaan M, Cabrera S, Shahawy M. Design, manufacture and testing of a new hybrid column. Constr Build Mater. 1998;12:39–49.10.1016/S0950-0618(97)00073-1 ↗
20. Yu T, Hu YM, Teng JG. FRP-confined circular concrete-filled steel tubular columns under cyclic axial compression. J Constr Steel Res. 2014;94:33–48.10.1016/j.jcsr.2013.11.003 ↗
21. Zhang Y, Zhang LW, Liew KM, Yu JL. Buckling analysis of graphene sheets embedded in an elastic medium based on the kp-Ritz method and non-local elasticity theory. Eng Anal Bound Elem. 2016;70:31–93.10.1016/j.enganabound.2016.05.009 ↗
22. Singh SB, Vummadisetti S, Chawla H. Influence of curing on the mechanical performance of FRP laminates. J Build Eng. 2018;16:1–19.10.1016/j.jobe.2017.12.002 ↗
23. Robert M, Benmokrane B. Combined effects of saline solution and moist concrete on long-term durability of GFRP reinforcing bars. Constr Build Mater. 2013;38:274–84.10.1016/j.conbuildmat.2012.08.021 ↗
24. Al-Salloum YA, EI-Gamal S, Almusallam TH, Alsayed SH, Aqel M. Effect of harsh environmental conditions on the tensile properties of GFRP bars. Compos Part B Eng. 2013;45(1):835–44.10.1016/j.compositesb.2012.05.004 ↗
25. Liao K, Schultheisz CR, Hunston DL. Effects of environmental aging on the properties of pultruded GFRP. Compos Part B Eng. 1999;30:485–93.10.1016/S1359-8368(99)00013-X ↗
26. Zhang RH, He ZC, Wang HW, Wang HW, You F, Li KN. Study on self-tuning tyre friction control for developing main-servo loop integrated chassis control system. IEEE Access. 2017;5:6649–60.10.1109/ACCESS.2017.2669263 ↗
27. Gooranorimi O, Suaris W, Nanni A. A model for the bond-slip of a GFRP bar in concrete. Eng Struct. 2017;146:34–42.10.1016/j.engstruct.2017.05.034 ↗
28. Gooranorimi O, Claure G, Suaris W, Nanni A. Bond-slip effect in flexural behavior of GFRP RC slabs. Compos Struct. 2018;193:80–86.10.1016/j.compstruct.2018.03.027 ↗
29. Yuan H, Lu XS, Hui D, Feo L. Studies on FRP-concrete interface with hardening and softening bond-slip law. Compos Struct. 2012;94:3781–92.10.1016/j.compstruct.2012.06.009 ↗
30. Vilanova I, Torres L, Baena M, Liorens M. Numerical simulation of bond-slip interface and tension stiffening in GFRP RC tensile elements. Compos Struct. 2016;153:504–13.10.1016/j.compstruct.2016.06.048 ↗
31. Tekle BH, Khennane A, Kayali O. Bond behavior of GFRP reinforcement in alkali activated cement concrete. Constr Build Mater. 2017;154:972–82.10.1016/j.conbuildmat.2017.08.029 ↗
32. Yuan JS, Hadi MNS. Bond-slip behavior between GFRP I-section and concrete. Compos Part B Eng. 2017;130:76–89.10.1016/j.compositesb.2017.07.060 ↗
33. Lu XZ, Teng JG, Ye LP, Jiang JJ. Bond-slip models for FRP sheets/plates bonded to concrete. Eng Struct. 2005;27:920–37.10.1016/j.engstruct.2005.01.014 ↗
34. ASTM D3039/D3039M-08, Standard test method for tensile properties of polymer matrix composite materials, West Conshohocken, PA, 2008.
35. JGJ 52-2006, Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete, China Architecture and Building Press, Beijing China, 2006. (In Chinese).
36. GB 50204-2002, Code for Construction Acceptance of Concrete Structure Engineering, China Architecture and Building Press, Beijing China, 2002. (In Chinese).
37. GB 50010-2010, Code for Design of Concrete Structures, China Architecture and Building Press, Beijing China, 2010. (In Chinese).