Theoretical and experimental investigation of MWCNT dispersion effect on the elastic modulus of flexible PDMS/MWCNT nanocomposites
Source abstract
Abstract
Abstract In this article, Young’s modulus of a flexible piezoresistive nanocomposite made of a certain amount of multiwalled carbon nanotube (MWCNT) contents dispersed in polydimethylsiloxane (PDMS) has been investigated using theoretical and experimental approaches. The PDMS/MWCNT nanocomposites with the governing factor of MWCNT weight fraction ( e.g. , 0.1, 0.25, and 0.5 wt%) were synthesized by the solution casting fabrication method. The nanocomposite samples were subjected to a standard compression test to measure their elastic modulus using Instron Universal testing machine under force control displacement mode. Due to the costs and limitations of experimental tests, theoretical predictions on the elasticity modulus of such flexible nanocomposites have also been performed using Eshelby–Mori–Tanaka (EMT) and Halpin–Tsai (HT) approaches. The theoretical results showed that HT’s approach at lower MWCNT contents and EMT’s approach at higher MWCNT contents have a better agreement to experimental results in predicting the elastic modulus of PDMS/MWCNT nanocomposites. The experimental results indicated that the inclusion of MWCNT in the PDMS matrix resulted in a noticeable improvement in Young’s modulus of PDMS/MWCNT nanocomposite at small values of MWCNT contents (up to w f = 0.25%); however, exceeding this nanofiller content did not elevate Young’s modulus due to the emergence of MWCNT agglomerations in the nanocomposite structure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Carbon Nanotubes in Composites · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Advanced Research Laboratory for Multifunctional Lightweight Structures (ARL-MLS), Department of Mechanical & Industrial Engineering, University of Toronto , Toronto , Canada
Toronto Smart Materials and Structures (TSMART), Department of Mechanical & Industrial Engineering, University of Toronto , Toronto , Canada
References (55)
Show source-provided references
1. Amjadi M, Kyung KKU, Park I, Sitti M. Stretchable, skin-mountable, and wearable strain sensors and their potential applications: a review. Adv Funct Mater. 2016;26(11):1678–98.10.1002/adfm.201504755 ↗
2. Chortos A, Liu J, Bao Z. Pursuing prosthetic electronic skin. Nat Mater. 2016;15(9):937–50.10.1038/nmat4671 ↗
3. Park J, You I, Shin S, Jeong U. Material approaches to stretchable strain sensors. ChemPhysChem. 2015;16(6):1155–63.10.1002/cphc.201402810 ↗
4. Moradi-Dastjerdi R, Behdinan K. Temperature effect on free vibration response of a smart multifunctional sandwich plate. J Sandw Struct Mater. 2021;23(6):2399–421. 10.1177/1099636220908707.10.1177/1099636220908707 ↗
5. Zuruzi AS, Haffiz TM, Affidah D, Amirul A, Norfatriah A, Nurmawati MH. Towards wearable pressure sensors using multiwall carbon nanotube/polydimethylsiloxane nanocomposite foams. Mater Des. 2017;132:449–58.10.1016/j.matdes.2017.06.059 ↗
6. Iglio R, Mariani S, Robbiano V, Strambini L, Barillaro G. Flexible polydimethylsiloxane foams decorated with multiwalled carbon nanotubes enable unprecedented detection of ultralow strain and pressure coupled with a large working range. ACS Appl Mater Interfaces. 2018;10(16):13877–85.10.1021/acsami.8b02322 ↗
7. Karimzadeh S, Safaei B, Jen TC. Prediction effect of ethanol molecules on doxorubicin drug delivery using single-walled carbon nanotube carrier through POPC cell membrane. J Mol Liq. 2021 May 15;330:115698.10.1016/j.molliq.2021.115698 ↗
8. Karimzadeh S, Safaei B, Jen TC. Investigate the importance of mechanical properties of SWCNT on doxorubicin anti-cancer drug adsorption for medical application: a molecular dynamic study. J Mol Graph Model. 2020;101:1–29.10.1016/j.jmgm.2020.107745 ↗
9. Meschino M, Wang L, Xu H, Moradi-Dastjerdi R, Behdinan K. Low-frequency nanocomposite piezoelectric energy harvester with embedded zinc oxide nanowires. Polym Compos. 2021;42:4573–85. 10.1002/pc.26169.10.1002/pc.26169 ↗
10. Ren X, Seidel GD. Computational micromechanics modeling of piezoresistivity in carbon nanotube-polymer nanocomposites. Compos Interfaces. 2013;20(9):693–720.10.1080/15685543.2013.813199 ↗
11. Zare Y, Rhee KY. Two-stage simulation of tensile modulus of carbon nanotube (CNT)-reinforced nanocomposites after percolation onset using the ouali approach. JOM. 2020;72(11):3943–51. 10.1007/s11837-020-04223-3.10.1007/s11837-020-04223-3 ↗
12. Singh NP, Gupta VK, Singh AP. Graphene and carbon nanotube reinforced epoxy nanocomposites: a review. Polymer (Guildf). 2019 Oct 10 [cited 2019 Oct 4];180:121724. https://www.sciencedirect.com/science/article/pii/S003238611930730X.10.1016/j.polymer.2019.121724 ↗
13. Pan S, Dai Q, Safaei B, Qin Z, Chu F. Damping characteristics of carbon nanotube reinforced epoxy nanocomposite beams. Thin-Walled Struct. 2021 Sep 1 [cited 2021 Aug 3];166:108127. https://linkinghub.elsevier.com/retrieve/pii/S0263823121004146.10.1016/j.tws.2021.108127 ↗
14. Barathi Dassan EG, Anjang Ab Rahman A, Abidin MSZ, Akil HM. Carbon nanotube-reinforced polymer composite for electromagnetic interference application: a review. Nanotechnol Rev. 2020;9(1):768–88.10.1515/ntrev-2020-0064 ↗
15. Moradi-Dastjerdi R, Radhi A, Behdinan K. Damped dynamic behavior of an advanced piezoelectric sandwich plate. Compos Struct. 2020;243:112243. 10.1016/j.compstruct.2020.112243.10.1016/j.compstruct.2020.112243 ↗
16. Kundalwal SI. Review on micromechanics of nano- and micro-fiber reinforced composites. Polym Compos. 2018;39(12):4243–74. 10.1002/pc.24569.10.1002/pc.24569 ↗
17. Fitzgerald G, DeJoannis J, Meunier M. Multiscale modeling of nanomaterials: recent developments and future prospects. Modeling, characterization and production of nanomaterials: electronics, photonics and energy applications. Vol. 3. Woodhead Publishing; 2015. p. 53. 10.1016/B978-1-78242-228-0.00001-6.10.1016/B978-1-78242-228-0.00001-6 ↗
18. Liu WK, Karpov EG, Zhang S, Park HS. An introduction to computational nanomechanics and materials. Computer Methods in Appl Mech Eng. 2004;193(17–20):1529–78. 10.1016/j.cma.2003.12.008.10.1016/j.cma.2003.12.008 ↗
19. Shen H. Nonlinear bending of functionally graded carbon nanotube-reinforced composite plates in thermal environments. Compos Struct. 2009;91(1):9–19. 10.1016/j.compstruct.2009.04.026.10.1016/j.compstruct.2009.04.026 ↗
20. Martone A, Faiella G, Antonucci V, Giordano M, Zarrelli M. The effect of the aspect ratio of carbon nanotubes on their effective reinforcement modulus in an epoxy. Compos Sci Technol. 2011;71(8):1117–23. 10.1016/j.compscitech.2011.04.002.10.1016/j.compscitech.2011.04.002 ↗
21. Moradi-Dastjerdi R, Pourasghar A. Dynamic analysis of functionally graded nanocomposite cylinders reinforced by wavy carbon nanotube under an impact load. J Vib Control. 2016;22:1062–75.10.1177/1077546314539368 ↗
22. Moradi-Dastjerdi R, Payganeh G, Tajdari M. Resonance in functionally graded nanocomposite cylinders reinforced by wavy carbon nanotube. Polym Compos. 2017;38:E542–52.10.1002/pc.24045 ↗
23. Moradi-Dastjerdi R, Payganeh G, Tajdari M. Thermoelastic analysis of functionally graded cylinders reinforced by wavy CNT using a mesh-free method. Polym Compos. 2018;39(7):2190–201.10.1002/pc.24183 ↗
24. Shokrieh MM, Rafiee R. Investigation of nanotube length effect on the reinforcement efficiency in carbon nanotube based composites. Compos Struct. 2010;92:2415–20.10.1016/j.compstruct.2010.02.018 ↗
25. Moradi-Dastjerdi R, Meguid SA, Rashahmadi S. Electro-dynamic analysis of smart nanoclay-reinforced plates with integrated piezoelectric layers. Appl Math Model. 2019;75:267–78. 10.1016/j.apm.2019.05.033.10.1016/j.apm.2019.05.033 ↗
26. Shi D, Feng X, Huang YY, Hwang K-C, Gao H. The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube- reinforced composites. J Eng Mater Technol. 2004;126(July):250–7.10.1115/1.1751182 ↗
27. Moradi-Dastjerdi R, Behdinan K. Free vibration response of smart sandwich plates with porous CNT-reinforced and piezoelectric layers. Appl Math Model. 2021;96:66–79. 10.1016/j.apm.2021.03.013.10.1016/j.apm.2021.03.013 ↗
28. Moradi-Dastjerdi R, Behdinan K. Dynamic performance of piezoelectric energy harvesters with a multifunctional nanocomposite substrate. Appl Energy. 2021;293:116947. 10.1016/j.apenergy.2021.116947.10.1016/j.apenergy.2021.116947 ↗
29. Montazeri A, Javadpour J, Khavandi A, Tcharkhtchi A, Mohajeri A. Mechanical properties of multi-walled carbon nanotube/epoxy composites. Mater Des. 2010;31(9):4202–8. 10.1016/j.matdes.2010.04.018.10.1016/j.matdes.2010.04.018 ↗
30. Barai P, Weng GJ. A theory of plasticity for carbon nanotube reinforced composites. Int J Plast. 2011;27(4):539–59. 10.1016/j.ijplas.2010.08.006.10.1016/j.ijplas.2010.08.006 ↗
31. Krishnaswamy AJ, Buroni FC, Garcia-Sanchez F, Melnik R, Rodriguez-Tembleque L, Saez A. Lead-free piezocomposites with CNT-modified matrices: Accounting for agglomerations and molecular defects. Compos Struct. 2019;224(April):111033.10.1016/j.compstruct.2019.111033 ↗
32. Lu J, Lu M, Bermak A, Lee YK. Study of piezoresistance effect of carbon nanotube-PDMS composite materials for nanosensors. 2007 7th IEEE International Conference on Nanotechology: IEEE-NANO 2007 Proceedings; 2007. p. 1240–3.10.1109/NANO.2007.4601407 ↗
33. Chandel VS, Wang G, Talha M. Advances in modelling and analysis of nano structures: a review. Nanotechnol Rev. 2020;9(1):230–58.10.1515/ntrev-2020-0020 ↗
34. Tanabi H, Erdal M. Effect of CNTs dispersion on electrical, mechanical and strain sensing properties of CNT/epoxy nanocomposites. Results Phys. 2019;12(1):486–503.10.1016/j.rinp.2018.11.081 ↗
35. Madaleno L, Pyrz R, Crosky A, Jensen LR, Rauhe JCM, Dolomanova V, et al. Composites: part A processing and characterization of polyurethane nanocomposite foam reinforced with montmorillonite – carbon nanotube hybrids. Compos Part A. 2013;44:1–7.10.1016/j.compositesa.2012.08.015 ↗
36. Montinaro N, Fustaino M, Pantano A. Carbon nanotubes dispersion assessment in nanocomposites by means of a pulsed thermographic approach. Materials (Basel). 2020;13(24):1–13.10.3390/ma13245649 ↗
37. Ma PC, Siddiqui NA, Marom G, Kim JK. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review. Compos Part A Appl Sci Manuf. 2010;41(10):1345–67.10.1016/j.compositesa.2010.07.003 ↗
38. Siddiqui NA, Li EL, Sham ML, Tang BZ, Gao SL, Mäder E, et al. Tensile strength of glass fibres with carbon nanotube-epoxy nanocomposite coating: effects of CNT morphology and dispersion state. Compos Part A Appl Sci Manuf. 2010;41(4):539–48.10.1016/j.compositesa.2009.12.011 ↗
39. Zhou YX, Wu PX, Cheng ZY, Ingram J, Jeelani S. Improvement in electrical, thermal and mechanical properties of epoxy by filling carbon nanotube. Express Polym Lett. 2008;2(1):40–8.10.3144/expresspolymlett.2008.6 ↗
40. Schilde C, Schlömann M, Overbeck A, Linke S, Kwade A. Thermal, mechanical and electrical properties of highly loaded CNT-epoxy composites – a model for the electric conductivity. Compos Sci Technol. 2015;117:183–90.10.1016/j.compscitech.2015.06.013 ↗
41. Wagner HD, Lourie O, Feldman Y, Tenne R. Stress-induced fragmentation of multiwall carbon nanotubes in a polymer matrix. Appl Phys Lett. 1998;72(2):188–90.10.1063/1.120680 ↗
42. Park SB, Lih E, Park KS, Joung YK, Han DK. Biopolymer-based functional composites for medical applications. Prog Polym Sci. 2017;68:77–105.10.1016/j.progpolymsci.2016.12.003 ↗
43. Wang JK, Xiong GM, Zhu M, Özyilmaz B, Castro Neto AH, Tan NS, et al. Polymer-enriched 3D graphene foams for biomedical applications. ACS Appl Mater Interfaces. 2015;7(15):8275–83.10.1021/acsami.5b01440 ↗
44. Kaur G, Adhikari R, Cass P, Bown M, Gunatillake P. Electrically conductive polymers and composites for biomedical applications. RSC Adv. 2015;5(47):37553–67.10.1039/C5RA01851J ↗
45. Lee W, Hong S. Characterization of elastic polymer-based smart insole and a simple foot plantar pressure visualization method using 16 electrodes. Sensors. 2019;19:1–10.10.3390/s19010044 ↗
46. Kim K, Hong SK, Jang N, Ha S, Lee HW, Kim J. Wearable resistive pressure sensor based on highly flexible carbon composite conductors with irregular surface morphology. ACS Appl Mater Interfaces. 2017;9:17499–507.10.1021/acsami.7b06119 ↗
47. Wang M, Guo Z. Enhanced electrical conductivity and piezoresistive sensing in multi-wall carbon nanotubes/polydimethylsiloxane nanocomposites via the construction of a self-segregated structure. R Soc Chem. 2017;9(31):11017–26.10.1039/C7NR02322G ↗
48. Hammock ML, Chortos A, Tee BCK, Tok JBH, Bao Z. 25th Anniversary article: The evolution of electronic skin (E-Skin): a brief history, design considerations, and recent progress. Adv Mater. 2013;25(42):5997–6038.10.1002/adma.201302240 ↗
49. Li M, Li H, Zhong W, Zhao Q, Wang D. Stretchable conductive polypyrrole/polyurethane (PPy/PU) strain sensor with netlike microcracks for human breath detection. ACS Appl Mater Interfaces. 2014;6(2):1313–9.10.1021/am4053305 ↗
50. Eshelby JD. The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc R Soc London Ser A. 1957;241:376–96.10.1098/rspa.1957.0133 ↗
51. Mura T. Micromechanics of defects in solids. The Hague: Martinus Nijhoff Pub; 1982.10.1007/978-94-011-9306-1 ↗
52. Roy S, Petrova RS, Mitra S. Effect of carbon nanotube (CNT) functionalization in epoxy-CNT composites. Nanotechnol Rev. 2018;7(6):475–85.10.1515/ntrev-2018-0068 ↗
53. Ghahramani P, Eldyasti A, Leung SN. Open-cell polyvinylidene fluoride foams as carriers to promote biofilm growth for biological wastewater treatment. Polym Eng Sci. 2021 Aug 1 [cited 2021 Aug 13];61(8):2161–71. https://onlinelibrary.wiley.com/doi/full/10.1002/pen.25741.10.1002/pen.25741 ↗
54. Paton KR. Scalable production of large quantities of defect-free few-layer graphene by shear exfoliation in liquids. Nat Mater. 2014;13:624–30.10.1038/nmat3944 ↗
55. Cui H, Yan X, Monasterio M, Xing F. Effects of various surfactants on the dispersion of MWCNTs – OH in aqueous solution. Nanomaterials. 2017;7:262.10.3390/nano7090262 ↗