journal article·2014-03-25

Failure mechanisms of hybrid FRP-concrete beams with external filament-wound wrapping

A. Chakrabortty, A. Khennane

Publisher page

Abstract

This paper presents an analysis of the results of an experimental program on the performance of a novel configuration of a hybrid FRP-concrete beam. The beam section consists of a GFRP pultruded profile, a CFRP laminate, and a concrete block all wrapped up using filament winding. It was found that the thickness of the concrete block and the confinement by the filament-wound wrapping had a profound effect on the energy dissipation behaviour of the beam. Using a shear punching model, and comparing the predicted results with the experimental ones, it was found that beyond a given value of the concrete block thickness, the deformational behaviour of the beam shifts from brittle to ductile. It was also found that the filament-wound wrap had many benefits such as providing a composite action between the concrete block and the GFRP box, improving the stiffness of the beam, and most importantly, enhancing the load carrying ability through induced confinement of the concrete.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. ACI J. · 1983 · 79 · 484
2. Proceedings - Institution of Civil Engineers, Struct. Build. · 1999 · 134 · 23110.1680/istbu.1999.31566 ↗
3. ACI J. · 1985 · 82 · 797
4. Compos. Struct. · 2007 · 77 · 6610.1016/j.compstruct.2005.06.003 ↗
5. J. Reinf. Plast. Comp. · 2010 · 29 · 350410.1177/0731684410381448 ↗
6. ASCE J. Struct. Eng. · 1995 · 121 · 106910.1061/(ASCE)0733-9445(1995)121:7(1069) ↗
7. ACI Struct. J. · 2001 · 98 · 451
8. ASCE J. Compos. Construct · 2005 · 9 · 25510.1061/(ASCE)1090-0268(2005)9:3(255) ↗
9. ASCE J. Compos. Construct. · 2003 · 7 · 13510.1061/(ASCE)1090-0268(2003)7:2(135) ↗
10. Au. J. Struct. Eng. · 2009 · 10 · 145
11. Constr. Build. Mater. · 2003 · 17 · 47110.1016/S0950-0618(03)00045-X ↗
12. J. Reinf. Plast. Comp. · 2003 · 22 · 114910.1177/0731684403035429 ↗
13. J. Mater. Civil Eng. · 1999 · 11 · 2110.1061/(ASCE)0899-1561(1999)11:1(21) ↗
14. ASCE J. Struct. Eng. · 1997 · 123 · 58310.1061/(ASCE)0733-9445(1997)123:5(583) ↗
15. ASCE J. Perf. Const. Facil. · 2004 · 18 · 14710.1061/(ASCE)0887-3828(2004)18:3(147) ↗
16. ASCE J. Compos. Construct. · 2001 · 5 · 23710.1061/(ASCE)1090-0268(2001)5:4(237) ↗
17. ASCE J. Struct. Eng. · 1998 · 129 · 1025
18. ACI Struct. J. · 1993 · 90 · 632
19. Mater. Struct. · 2002 · 35 · 5010.1007/BF02482090 ↗
20. ASCE J. Compos. Construct. · 2007 · 11 · 20110.1061/(ASCE)1090-0268(2007)11:2(201) ↗
21. ASCE J. Compos. Construct. · 2010 · 14 · 6210.1061/(ASCE)CC.1943-5614.0000051 ↗
22. Reinf. Plast. · 2005 · 49 · 20
23. ASCE J.Compos. Construct. · 2003 · 7 · 26610.1061/(ASCE)1090-0268(2003)7:3(266) ↗
24. ASCE J. Struct. Eng. · 1981 · 107 · 2245
25. J. Reinf. Plast. Comp. · 2003 · 22 · 118710.1177/0731684403035430 ↗
26. Int. J. Mech. Sci. · 1999 · 41 · 110.1016/S0020-7403(97)00086-6 ↗