journal article·2002-09-01

Design and properties of co-continuous nanostructured polymers by reactive blending

Helene Pernot, Martin Baumert, François Court, Ludwik Leibler

Nature Materials· Volume 1· Issue 1
Publisher page

Abstract

With an annual production of hundreds of millions of tons, the few commodity polymers that dominate the plastics market cannot satisfy all the applications and expectations. In this context, the fabrication of thermodynamically stable polymer blends structured on submicrometre scales raises much hope, but poses significant scientific and industrial challenges. Here, we propose and demonstrate for an industrially relevant system, polyethylene and polyamide, that hitherto inaccessible co-continuous morphologies can be produced over a wide range of compositions by reactive blending. Paradoxically, the self-assembled structures are thermodynamically stable because of the molecular polydispersity inherent in the production method. These nanostructured materials present a unique combination of properties impossible to achieve with classical blends. This versatile, low-cost and simple strategy should be widely applicable.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Polymer Synthesis and Characterization · Polymer Nanocomposites and Properties · Block Copolymer Self-Assembly

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Utracki, L.A. Polymer Alloys and Blends (Hanser, New York, 1989).
2. de Gennes, P.G. & Taupin, C. Microemulsions and the flexibility of oil/water interfaces. J. Phys. Chem. 86, 2294–2304 (1992).10.1021/j100210a011 ↗
3. Bates, F.S. et al. Polymeric co-continuous microemulsions. Phys. Rev. Lett. 79, 849–852 (1997).10.1103/PhysRevLett.79.849 ↗
4. Fredrickson, G.H. & Bates, F.S. Design of co-continuous polymeric microemulsions. J. Polym. Sci. Part B: Polym. Phys. 35, 2775–2786 (1995).10.1002/(SICI)1099-0488(199712)35:17<2775::AID-POLB2>3.0.CO;2-Q ↗
5. Hillmyer, M.A., Maurer, W.W., Lodge, T.P., Bates, F.S. & Almdal, K. Model co-continuous microemulsions in ternary homopolymer/block copolymer blends. J. Phys. Chem. B 103, 4814–4824 (1999).10.1021/jp990089z ↗
6. Washburn, N.R., Lodge, T.P. & Bates, F.S. Ternary polymer blends as model surfactant systems. J. Phys. Chem. B 104, 6987–6997 (2000).10.1021/jp994230f ↗
7. Fredrickson, G.H. & Bates, F.S. Stabilizing co-continuous polymer blend morphologies with ABC block copolymers. Eur. Phys. J. B 1, 71–76 (1998).10.1007/s100510050153 ↗
8. Orr, C.A., Adedeji, A., Hirao, A., Bates, F.S. & Macosko, C.W. Flow-induced reactive self-assembly. Macromolecules 30, 1243–1246 (1997).10.1021/ma961574k ↗
9. Lyu, S.-P. Cernohous, J.J., Bates, F.S. & Macosko, C.W. Interfacial reaction induced roughening in polymer blends. Macromolecules 32, 106–110 (1999).10.1021/ma9810767 ↗
10. Charoensirisomboon, P., Inoue, T. & Weber, M. Interfacial behavior of block copolymers in situ-formed in reactive blending of dissimilar polymers. Polymer 41, 4483–4490 (2000).10.1016/S0032-3861(99)00672-2 ↗
11. Ibuki, J. et al. Reactive blending of polysulfone with polyamide: a potential for solvent-free preparation. Polymer 40, 647–653 (1999).10.1016/S0032-3861(98)00330-9 ↗
12. Charoensirisomboon, P., Chiba, T., Solomko, S.I., Inoue, T. & Weber, M. Reactive blending of polysulfone and polyamide: a difference in interfacial behavior between in situ formed block and graft copolymers. Polymer 40, 6803–6810 (1999).10.1016/S0032-3861(99)00036-1 ↗
13. Oyama, H.T., Ougizawa, T., Inoue, T., Weber, M. & Tamaru, K. Interfacial coupling between immiscible polymers: reactive interface between polysulfone and amorphous polyamide. Macromolecules 34, 7017–7024 (2001).10.1021/ma010668d ↗
14. Yin, Z., Koulic, C., Pagnoulle, C. & Jerome, R. Reactive blending of functional PS and PMMA: interfacial behavior of in situ formed graft copolymers. Macromolecules 34, 5132–5139 (2001).10.1021/ma001798+ ↗
15. de Gennes, P.G. Conformations of polymers attached to an interface. Macromolecules 13, 1069–1075 (1980).10.1021/ma60077a009 ↗
16. Milner, S.T., Witten, T.A. & Cates, M.E. Effects of polydispersity in the end-grafted polymer brush. Macromolecules 22, 853–861 (1989).10.1021/ma00192a057 ↗
17. Thompson, R.B. & Matsen, M.W. Improving polymeric microemulsions with block copolymer polydispersity. Phys. Rev. Lett. 85, 670–673 (2000).10.1103/PhysRevLett.85.670 ↗
18. Pernot, H. Thesis, Univ. Pierre et Marie Curie (Paris 6), in preparation.
19. Leibler, L. Emulsifying effects of block copolymers in incompatible polymer blends. Makromol. Chem.-M. Symp. 16, 1–17 (1988).10.1002/masy.19880160103 ↗
20. Pochan, D.J. et al. Morphologies of microphase-separated A2B simple graft copolymers. Macromolecules 29, 5091–5098 (1996).10.1021/ma951696x ↗
21. Loo, Y.-L., Register, R.A., Ryan, A.J. & Dee, G.T. Polymer crystallisation confined in one, two or three dimensions. Macromolecules 34, 8968–8977 (2001).10.1021/ma011521p ↗
22. Loo, Y.-L., Register, R.A. & Ryan, A.J. Modes of crystallisation in block copolymer microdomains: breakout, templated, and confined. Macromolecules 35, 2365–2374 (2002).10.1021/ma011824j ↗
23. Xu, J.-T. et al. Morphological confinement on crystallisation in blends of poly(oxyethylene-block-oxybutylene) and poly(oxybutylene). Macromolecules 35, 3614–3621 (2002).10.1021/ma0116147 ↗