journal article·2025-01-22

Mechanical properties and failure mechanisms of self-piercing riveted aluminum alloys with different edge distances

Jin-Rui Duan, Chao Chen

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Yang B, Shan H, Liang Y et al (2022) Effect of adhesive application on friction self-piercing riveting (F-SPR) process of AA7075-T6 aluminum alloy. J Mater Process Tech 299:117336. https://doi.org/10.1016/j.jmatprotec.2021.11733610.1016/j.jmatprotec.2021.117336 ↗
2. Geng P, Qin G, Zhou J et al (2019) Parametric optimization and microstructural characterization of friction welded aeronautic aluminum alloy 2024. T Nonferr Metal Soc 29(12):2483–2495. https://doi.org/10.1016/S1003-6326(19)65156-310.1016/S1003-6326(19)65156-3 ↗
3. Regensburg A, Bergmann J, Schürer R et al (2016) Advances and potentials in friction stir welding of aluminum alloys. Key Eng Mater 710:137–142. https://doi.org/10.4028/www.scientific.net/KEM.710.13710.4028/www.scientific.net/KEM.710.137 ↗
4. Gu J, Bai J, Ding J et al (2018) Design and cracking susceptibility of additively manufactured Al-Cu-Mg alloys with tandem wires and pulsed arc. J Mater Process Tech 262:210–220. https://doi.org/10.1016/j.jmatprotec.2018.06.03010.1016/j.jmatprotec.2018.06.030 ↗
5. Liu Y, Zhuang W, Luo Y et al (2023) Joining mechanism and damage of self-piercing riveted joints in carbon fibre reinforced polymer composites and aluminium alloy. Thin Wall Struct 182:110233. https://doi.org/10.1016/j.tws.2022.11023310.1016/j.tws.2022.110233 ↗
6. Meng Y, Li S, Liu J et al (2022) Intergranular corrosion of spark plasma sintered 2024 aluminum alloy at different heat treatment states. Rare Met 41(11):3865–3877. https://doi.org/10.1007/s12598-022-01990-710.1007/s12598-022-01990-7 ↗
7. Su D, Jin H, Wu S (2022) Microstructure and mechanical properties of 2219 aluminum alloy VPTIG welds during cyclic thermal treatment. Rare Met 41(10):3539–3545. https://doi.org/10.1007/s12598-015-0642-y10.1007/s12598-015-0642-y ↗
8. Yang Z, Sun Y, Li X et al (2022) Dry sliding wear performance of 7075 Al alloy under different temperatures and load conditions. Rare Met 41(3):1057–1062. https://doi.org/10.1007/s12598-015-0504-710.1007/s12598-015-0504-7 ↗
9. Wu J, Chen C (2022) Experimental investigation of high impact polystyrene/metal self-piercing riveted joint. Polym Advan Technol 33(7):2221–2230. https://doi.org/10.1002/pat.567310.1002/pat.5673 ↗
10. Huang Z, Zhang Y, Lin Y et al (2022) Physical property and failure mechanism of self-piercing riveting joints between foam metal sandwich composite aluminum plate and aluminum alloy. J Mater Res Technol 17:139–149. https://doi.org/10.1016/j.jmrt.2021.12.13210.1016/j.jmrt.2021.12.132 ↗
11. Liu Y, Tang Q, Tian X et al (2023) Flexible servo riveting system control strategy based on the RBF network and self-pierce riveting process. Adv Manuf 11(1):39–55. https://doi.org/10.1007/s40436-022-00403-310.1007/s40436-022-00403-3 ↗
12. Liu Y, Zhuang W, Wu S (2020) Effects of hole diameter and ply angle on the mechanical behaviour of hole-clinched joints in carbon fibre reinforced polymers and aluminium alloy sheets. Int J Adv Manuf Tech 106(11):5345–5352. https://doi.org/10.1007/s00170-020-04993-910.1007/s00170-020-04993-9 ↗
13. Lambiase F, Ko D (2016) Feasibility of mechanical clinching for joining aluminum AA6082-T6 and carbon fiber reinforced polymer sheets. Mater Design 107:341–352. https://doi.org/10.1016/j.matdes.2016.06.06110.1016/j.matdes.2016.06.061 ↗
14. Zhang H, Chen C (2023) Research on material flow in flat clinching process and joint failure mechanism. J Cent South Univ 30(12):3975–3990. https://doi.org/10.1007/s11771-023-5502-610.1007/s11771-023-5502-6 ↗
15. Lambiase F, Balle F, Blaga L et al (2021) Friction-based processes for hybrid multi-material joining. Compos Struct 266:113828. https://doi.org/10.1016/j.compstruct.2021.11382810.1016/j.compstruct.2021.113828 ↗
16. Wang C, Du Z, Cheng A et al (2023) Influence of process parameters and heat treatment on self-piercing riveting of high-strength steel and die-casting aluminium. J Mater Res Technol 26:8857–8878. https://doi.org/10.1016/j.jmrt.2023.09.18710.1016/j.jmrt.2023.09.187 ↗
17. Qin D, Chen C (2022) Failure behavior and mechanical properties of novel dieless clinched joints with different sheet thickness ratios. J Cent South Univ 29(9):3077–3087. https://doi.org/10.1007/s11771-022-5120-810.1007/s11771-022-5120-8 ↗
18. Datta R, Raja D, Bhargava M (2023) Microstructure and texture correlation with mechanical properties and formability of friction stir-welded AA5754 sheets. J Mater Eng Perform. https://doi.org/10.1007/s11665-023-09043-510.1007/s11665-023-09043-5 ↗
19. Deng J, Lyu F, Chen R et al (2019) Influence of die geometry on self-piercing riveting of aluminum alloy AA6061-T6 to mild steel SPFC340 sheets. Adv Manuf 7(2):209–220. https://doi.org/10.1007/s40436-019-00250-910.1007/s40436-019-00250-9 ↗
20. Li D (2017) Influence of aluminium sheet surface modification on the self-piercing riveting process and the joint static lap shear strength. Int J Adv Manuf Tech 93(5):2685–2695. https://doi.org/10.1007/s00170-017-0710-610.1007/s00170-017-0710-6 ↗
21. Ren X, Chen C, Ran X et al (2022) Effects of friction factor on mechanical performance of the AA5182 clinched joint. Int J Adv Manuf Tech 120(3/4):1831–1841. https://doi.org/10.1007/s00170-022-08788-y10.1007/s00170-022-08788-y ↗
22. Karathanasopoulos N, Mohr D (2022) Strength and failure of self-piercing riveted aluminum and steel sheet joints: multi-axial experiments and modeling. J Adv Join Process 5:100107. https://doi.org/10.1016/j.jajp.2022.10010710.1016/j.jajp.2022.100107 ↗
23. Karathanasopoulos N, Pandya K, Mohr D (2021) An experimental and numerical investigation of the role of rivet and die design on the self-piercing riveting joint characteristics of aluminum and steel sheets. J Manuf Process 69:290–302. https://doi.org/10.1016/j.jmapro.2021.07.04910.1016/j.jmapro.2021.07.049 ↗
24. Porcaro R, Hanssen A, Langseth M et al (2006) Self-piercing riveting process: an experimental and numerical investigation. J Mater Process Tech 171(1):10–20. https://doi.org/10.1016/j.jmatprotec.2005.05.04810.1016/j.jmatprotec.2005.05.048 ↗
25. Zhao X, Meng D, Zhang J et al (2020) The effect of heat treatment on die casting aluminum to apply self-pierce riveting. Int J Adv Manuf Tech 109(9/12):2409–2419. https://doi.org/10.1007/s00170-020-05833-610.1007/s00170-020-05833-6 ↗
26. Li D, Chrysanthou A, Patel I et al (2017) Self-piercing riveting–a review. Int J Adv Manuf Tech 92(5):1777–1824. https://doi.org/10.1007/s00170-017-0156-x10.1007/s00170-017-0156-x ↗
27. Zhang Y, Zhu L, Peng R et al (2022) Study on the mechanical properties and fatigue failure mechanism of 7075-T6 aluminum alloy joints under different joining processes. P I Mech Eng E-J Pro 237(6):1–9. https://doi.org/10.1177/0954408922113644710.1177/09544089221136447 ↗
28. Asati B, Shajan N, Kishore VA et al (2022) A comparative investigation on self-piercing riveting and resistance spot welding of automotive grade dissimilar galvanized steel sheets. Int J Adv Manuf Tech 123(3):1079–1097. https://doi.org/10.1007/s00170-022-10226-y10.1007/s00170-022-10226-y ↗
29. Sun X, Stephens E, Khaleel M (2007) Fatigue behaviors of self-piercing rivets joining similar and dissimilar sheet metals. Int J Fatigue 29(2):370–386. https://doi.org/10.1016/j.ijfatigue.2006.02.05410.1016/j.ijfatigue.2006.02.054 ↗
30. Zhou Z, Li H, Chen C (2024) Microstructural transformation and mechanical properties of Cu-sputtered alumina ceramic/Zn5Al/AA2024 ultrasonic soldering joints. Intermetallics 165:108153. https://doi.org/10.1016/j.intermet.2023.10815310.1016/j.intermet.2023.108153 ↗
31. Li D, Han L, Thornton M et al (2012) Influence of edge distance on quality and static behaviour of self-piercing riveted aluminium joints. Mater Design 34:22–31. https://doi.org/10.1016/j.matdes.2011.07.04610.1016/j.matdes.2011.07.046 ↗
32. Li D, Han L, Thornton M et al (2012) Influence of rivet to sheet edge distance on fatigue strength of self-piercing riveted aluminium joints. Mat Sci Eng A 558:242–252. https://doi.org/10.1016/j.msea.2012.07.11910.1016/j.msea.2012.07.119 ↗
33. Song C, Xing B, He X et al (2021) Self-piercing riveting for single-strap butt joints in similar aluminium alloys. Sci Technol Weld Joi 26(4):301–308. https://doi.org/10.1080/13621718.2021.190594410.1080/13621718.2021.1905944 ↗