Influence of volume energy density on the microstructure and properties of parts fabricated by laser powder bed fusion using recycled Ti6Al4V powder blends
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Ali S, Prajapati MJ, Bhat C et al (2025) Additive manufactured enabled digital metallurgy processes, challenges and future prospects. Appl Mater Today 42:102580. https://doi.org/10.1016/j.apmt.2024.10258010.1016/j.apmt.2024.102580 ↗
2. Vivegananthan P, Gao S, Ji W et al (2024) Recent progress on 3D printing of lightweight metal thin-walled structures. Adv Mater 36:2402130. https://doi.org/10.1002/adma.20240213010.1002/adma.202402130 ↗
3. Dhiman S, Chinthapenta V, Brandt M et al (2024) Microstructure control in additively manufactured Ti-6Al-4V during high-power laser powder bed fusion. Addit Manuf 96:104573. https://doi.org/10.1016/j.addma.2024.10457310.1016/j.addma.2024.104573 ↗
4. Srivastava M, Jayakumar V, Udayan Y et al (2024) Additive manufacturing of titanium alloy for aerospace applications: insights into the process, microstructure, and mechanical properties. Appl Mater Today 41:102481. https://doi.org/10.1016/j.apmt.2024.10248110.1016/j.apmt.2024.102481 ↗
5. Liu X, Gu D, Yuan L et al (2024) Topological optimisation and laser additive manufacturing of force-direction-sensitive NiTi porous structures with large deformation recovery behaviour. Virtual Phys Prototyp 19:e2365860. https://doi.org/10.1080/17452759.2024.236586010.1080/17452759.2024.2365860 ↗
6. Lim B, Nomoto K, Clarke AJ et al (2023) On the interplay of internal voids, mechanical properties, and residual stresses in additively manufactured Haynes 282. Addit Manuf 75:103749. https://doi.org/10.1016/j.addma.2023.10374910.1016/j.addma.2023.103749 ↗
7. Zhao N, Parthasarathy M, Patil S et al (2023) Direct additive manufacturing of metal parts for automotive applications. J Manuf Syst 68:368–375. https://doi.org/10.1016/j.jmsy.2023.04.00810.1016/j.jmsy.2023.04.008 ↗
8. Alami AH, Olabi AG, Alashkar A et al (2023) Additive manufacturing in the aerospace and automotive industries: recent trends and role in achieving sustainable development goals. Ain Shams Eng J 14:102516. https://doi.org/10.1016/j.asej.2023.10251610.1016/j.asej.2023.102516 ↗
9. Markovits T (2024) Analysis of printing time components and powder utilisation efficiency of metal selective laser melting process in case of 316L and Ti6Al4V materials. Virtual Phys Prototyp 19:e2366508. https://doi.org/10.1080/17452759.2024.236650810.1080/17452759.2024.2366508 ↗
10. Promoppatum P, Yao SC, Pistorius PC et al (2017) A comprehensive comparison of the analytical and numerical prediction of the thermal history and solidification microstructure of Inconel 718 products made by laser powder-bed fusion. Engineering 3:685–694. https://doi.org/10.1016/J.ENG.2017.05.02310.1016/J.ENG.2017.05.023 ↗
11. Douglas R, Barnard N, Lavery N et al (2024) The effect of powder recycling on the mechanical performance of laser powder bed fused stainless steel 316L. Addit Manuf 88:104245. https://doi.org/10.1016/j.addma.2024.10424510.1016/j.addma.2024.104245 ↗
12. Qian Y, Yan W, Lin F (2019) Data mining for mesoscopic simulation of electron beam selective melting. Engineering 5:746–754. https://doi.org/10.1016/j.eng.2019.06.00610.1016/j.eng.2019.06.006 ↗
13. Moghimian P, Poirié T, Habibnejad-Korayem M et al (2021) Metal powders in additive manufacturing: a review on reusability and recyclability of common titanium, nickel and aluminum alloys. Addit Manuf 43:102017. https://doi.org/10.1016/j.addma.2021.10201710.1016/j.addma.2021.102017 ↗
14. Liu M, Yang X, Liu Z et al (2025) Effect of spreader and particle properties on powder bed generation with discrete element method in additive manufacturing. Powder Technol 449:120420. https://doi.org/10.1016/j.powtec.2024.12042010.1016/j.powtec.2024.120420 ↗
15. Yim S, Bian H, Aoyagi K et al (2023) Effect of powder morphology on flowability and spreading behavior in powder bed fusion additive manufacturing process: a particle-scale modeling study. Addit Manuf 72:103612. https://doi.org/10.1016/j.addma.2023.10361210.1016/j.addma.2023.103612 ↗
16. Takaku K, Suzuki S, Ikeshoji TT et al (2024) Assessing powder processability and melting behavior in powder-bed fusion additive manufacturing. Mater Des 240:112877. https://doi.org/10.1016/j.matdes.2024.11287710.1016/j.matdes.2024.112877 ↗
17. Cordova L, Bor T, de Smit M et al (2020) Effects of powder reuse on the microstructure and mechanical behaviour of Al-Mg-Sc-Zr alloy processed by laser powder bed fusion (LPBF). Addit Manuf 36:101625. https://doi.org/10.1016/j.addma.2020.10162510.1016/j.addma.2020.101625 ↗
18. Yim S, Sun J, Minowa K et al (2023) In-situ observation of powder spreading in powder bed fusion metal additive manufacturing process using particle image velocimetry. Addit Manuf 78:103823. https://doi.org/10.1016/j.addma.2023.10382310.1016/j.addma.2023.103823 ↗
19. Xiang K, Qin L, Zhao Y et al (2024) Operando study of the dynamic evolution of multiple Fe-rich intermetallics of an Al recycled alloy in solidification by synchrotron X-ray and machine learning. Acta Mater 279:120267. https://doi.org/10.1016/j.actamat.2024.12026710.1016/j.actamat.2024.120267 ↗
20. Carrion PE, Soltani-Tehrani A, Phan N et al (2018) Powder recycling effects on the tensile and fatigue behavior of additively manufactured Ti-6Al-4V parts. JOM 71:963–973. https://doi.org/10.1007/s11837-018-3248-710.1007/s11837-018-3248-7 ↗
21. Soltani-Tehrani A, Isaac JP, Tippur HV et al (2023) Ti-6Al-4V powder reuse in laser powder bed fusion (L-PBF): the effect on porosity, microstructure, and mechanical behavior. Int J Fatigue 167:107343. https://doi.org/10.1016/j.ijfatigue.2022.10734310.1016/j.ijfatigue.2022.107343 ↗
22. Alamos FJ, Schiltz J, Kozlovsky K et al (2020) Effect of powder reuse on mechanical properties of Ti-6Al-4V produced through selective laser melting. Int J Refract Met Hard Mater 91:105273. https://doi.org/10.1016/j.ijrmhm.2020.10527310.1016/j.ijrmhm.2020.105273 ↗
23. Skalon M, Meier B, Leitner T et al (2021) Reuse of Ti6Al4V powder and its impact on surface tension, melt pool behavior and mechanical properties of additively manufactured components. Materials 14:1251. https://doi.org/10.3390/ma1405125110.3390/ma14051251 ↗
24. Dhiman S, Joshi RS, Singh S et al (2022) Recycling of Ti6Al4V machining swarf into additive manufacturing feedstock powder to realise sustainable recycling goals. J Clean Prod 348:131342. https://doi.org/10.1016/j.jclepro.2022.13134210.1016/j.jclepro.2022.131342 ↗
25. Fullenwider B, Kiani P, Schoenung JM et al (2019) Two-stage ball milling of recycled machining chips to create an alternative feedstock powder for metal additive manufacturing. Powder Technol 342:562–571. https://doi.org/10.1016/j.powtec.2018.10.02310.1016/j.powtec.2018.10.023 ↗
26. Song T, Dong T, Lu SL et al (2021) Simulation-informed laser metal powder deposition of Ti-6Al-4V with ultrafine α-β lamellar structures for desired tensile properties. Addit Manuf 46:102139. https://doi.org/10.1016/j.addma.2021.10213910.1016/j.addma.2021.102139 ↗
27. Abhishek S, Anand Kumar S, Rao S (2024) Multi-scale modelling for optimization of process parameters of laser powder bed fusion processed Inconel 718 surrogate part. Eng Fail Anal 155:107713. https://doi.org/10.1016/j.engfailanal.2023.10771310.1016/j.engfailanal.2023.107713 ↗
28. Liu M, Liu Z, Li B et al (2023) Numerical simulation on melt pool and solidification in the direct energy deposition process of GH3536 powder superalloy. J Mater Res Technol 26:5626–5637. https://doi.org/10.1016/j.jmrt.2023.08.25210.1016/j.jmrt.2023.08.252 ↗
29. Xu W, Lui EW, Pateras A et al (2017) In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance. Acta Mater 125:390–400. https://doi.org/10.1016/j.actamat.2016.12.02710.1016/j.actamat.2016.12.027 ↗
30. Ma HY, Wang JC, Qin P et al (2024) Advances in additively manufactured titanium alloys by powder bed fusion and directed energy deposition: microstructure, defects, and mechanical behavior. J Mater Sci Technol 183:32–62. https://doi.org/10.1016/j.jmst.2023.11.00310.1016/j.jmst.2023.11.003 ↗