Laser welding monitoring techniques based on optical diagnosis and artificial intelligence: a review
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Thermography and Photoacoustic Techniques · Ocular and Laser Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Aminzadeh A, Sattarpanah KS, Meiabadi MS et al (2022) A survey of process monitoring using computer-aided inspection in laser-welded blanks of light metals based on the digital twins concept. Quantum Beam Sci 6:19. https://doi.org/10.3390/qubs602001910.3390/qubs6020019 ↗
2. Chen L, Yang T, Zhuang Y et al (2021) The multi-objective optimization modelling for properties of 301 stainless steel welding joints in ultra-narrow gap laser welding. Weld World 65:1333–134510.1007/s40194-021-01068-5 ↗
3. Yang F (2021) Research progress of laser welding under subatmospheric pressure. Int J Adv Manuf Technol 116:803–82010.1007/s00170-021-07488-3 ↗
4. American WS, Kumar N, Kumar N et al (2021) A state-of-the-art review of laser welding of polymers—part I: welding parameters. Weld J 100:221–22810.29391/2021.100.019 ↗
5. Spöttl M, Mohrbacher H (2014) Laser-based manufacturing concepts for efficient production of tailor welded sheet metals. Adv Manuf 2:193–20210.1007/s40436-014-0088-8 ↗
6. Mohrbacher H, Spoettl M, Paegle J (2015) Innovative manufacturing technology enabling light weighting with steel in commercial vehicles. Adv Manuf 3:3–1810.1007/s40436-015-0101-x ↗
7. Fan X, Gao X, Liu G et al (2021) Research and prospect of welding monitoring technology based on machine vision. Int J Adv Manuf Technol 115:3365–339110.1007/s00170-021-07398-4 ↗
8. He B, Bai KJ (2021) Digital twin-based sustainable intelligent manufacturing: a review. Adv Manuf 9:1–2110.1007/s40436-020-00302-5 ↗
9. Fabbro R (2010) Melt pool and keyhole behaviour analysis for deep penetration laser welding. J Phys Appl Phys 43:445501. https://doi.org/10.1088/0022-3727/43/44/44550110.1088/0022-3727/43/44/445501 ↗
10. Zeng H, Zhou Z, Chen Y et al (2001) Wavelet analysis of acoustic emission signals and quality control in laser welding. J Laser Appl 13:167–17310.2351/1.1386799 ↗
11. You DY, Gao XD, Katayama S (2014) Review of laser welding monitoring. Sci Technol Weld Join 19:181–20110.1179/1362171813Y.0000000180 ↗
12. Cai W, Wang J, Zhou Q et al (2019) Equipment and machine learning in welding monitoring: a short review. In: Proceedings of the 5th international conference on mechatronics and robotics engineering- ICMRE’19. ACM Press, Rome10.1145/3314493.3314508 ↗
13. Lee J, Kang M (2021) A review on the characteristics of laser welding with filler wire according to process parameters controlling the heat input and wire feeding. J Weld Join 39:167–17310.5781/JWJ.2021.39.2.5 ↗
14. Ion JC (2005) Chapter 16—keyhole welding. In Ion JC (ed) laser processing of engineering materials, Butterworth-Heinemann, Oxford, pp 395–49510.1016/B978-075066079-2/50019-2 ↗
15. Sibillano T, Ancona A, Berardi V et al (2007) Optical detection of conduction/keyhole mode transition in laser welding. J Mater Process Technol 191:364–36710.1016/j.jmatprotec.2007.03.075 ↗
16. Bahador A, Hamzah E, Kondoh K et al (2018) Heat-conduction-type and keyhole-type laser welding of Ti-Ni shape-memory alloys processed by spark-plasma sintering. Mater Trans 59:835–84210.2320/matertrans.M2017387 ↗
17. Coviello D, D’Angola A, Sorgente D (2022) Numerical study on the influence of the plasma properties on the keyhole geometry in laser beam welding. Front Phys 9:754672. https://doi.org/10.3389/fphy.2021.75467210.3389/fphy.2021.754672 ↗
18. Svenungsson J, Choquet I, Kaplan AFH (2015) Laser welding process—a review of keyhole welding modelling. Phys Procedia 78:182–19110.1016/j.phpro.2015.11.042 ↗
19. Sibillano T, Ancona A, Berardi V et al (2006) Correlation spectroscopy as a tool for detecting losses of ligand elements in laser welding of aluminium alloys. Opt Lasers Eng 44:1324–133510.1016/j.optlaseng.2005.12.002 ↗
20. Chen X (2003) Three-dimensional modelling of the laser-induced plasma plume characteristics in laser welding. J Phys Appl Phys 36:628. https://doi.org/10.1088/0022-3727/36/6/30410.1088/0022-3727/36/6/304 ↗
21. Gong J, Peng G, Li L et al (2021) Effect of plasma plume produced by vacuum laser welding on energy transmission. Opt Laser Technol 136:106744. https://doi.org/10.1016/j.optlastec.2020.10674410.1016/j.optlastec.2020.106744 ↗
22. Brock C, Hohenstein R, Schmidt M (2011) Towards fast tracking of the keyhole geometry. Phys Procedia 12:697–70310.1016/j.phpro.2011.03.087 ↗
23. Feng Y, Gao X, Zhang Y et al (2021) Simulation and experiment for dynamics of laser welding keyhole and molten pool at different penetration status. Int J Adv Manuf Technol 112:2301–231210.1007/s00170-020-06489-y ↗
24. Gong S, Pang S, Wang H et al (2021) Laser welding basics. In: Weld pool dynamics in deep penetration laser welding. Springer, Singapore. https://doi.org/10.1007/978-981-16-0788-2_110.1007/978-981-16-0788-2_1 ↗
25. Woizeschke P, Radel T, Nicolay P et al (2017) Laser deep penetration welding of an aluminum alloy with simultaneously applied vibrations. Lasers Manuf Mater Process 4:1–1210.1007/s40516-016-0032-9 ↗
26. Olsson R, Eriksson I, Powell J et al (2011) Challenges to the interpretation of the electromagnetic feedback from laser welding. Opt Lasers Eng 49:188–19410.1016/j.optlaseng.2010.08.018 ↗
27. Wang T, Gao X, Seiji K et al (2012) Study of dynamic features of surface plasma in high-power disk laser welding. Plasma Sci Technol 14:245–25110.1088/1009-0630/14/3/11 ↗
28. Okabe T, Yasuda K, Nakata K (2016) Dynamic observations of welding phenomena and finite element analysis in high-frequency electric resistance welding. Weld Int 30:835–84510.1080/09507116.2016.1142203 ↗
29. Auwal ST, Ramesh S, Yusof F et al (2018) A review on laser beam welding of copper alloys. Int J Adv Manuf Technol 96:475–49010.1007/s00170-017-1566-5 ↗
30. Allen TR, Huang W, Tanner JR et al (2020) Energy-coupling mechanisms revealed through simultaneous keyhole depth and absorptance measurements during laser-metal processing. Phys Rev Appl 13:064070. https://doi.org/10.1103/PhysRevApplied.13.06407010.1103/PhysRevApplied.13.064070 ↗
31. Parab ND, Zhao C, Cunningham R et al (2019) High-speed synchrotron X-ray imaging of laser powder bed fusion process. Synchrotron Radiat News 32:4–810.1080/08940886.2019.1582280 ↗
32. Zhao H, Debroy T (2001) Pore formation during laser beam welding of die-cast magnesium alloy AM60B—mechanism and remedy. Weld J Miami Fla 80:204–210
33. Katayama S (2020) Fundamentals and details of laser welding. Springer, Singapore10.1007/978-981-15-7933-2 ↗
34. Sheikhi M, Malek GF, Assadi H (2015) Prediction of solidification cracking in pulsed laser welding of 2024 aluminum alloy. Acta Mater 82:491–50210.1016/j.actamat.2014.09.002 ↗
35. Lippold JC (1994) Solidification behavior and cracking susceptibility of pulsed-laser welds in austenitic stainless steels. Weld J 73(6):129–139
36. Kim HT, Nam SW (1996) Solidification cracking susceptibility of high strength aluminum alloy weldment. Scr Mater 34:1139–114510.1016/1359-6462(95)00644-3 ↗
37. Zhang M, Zhang Z, Tang K et al (2018) Analysis of mechanisms of underfill in full penetration laser welding of thick stainless steel with a 10 kW fiber laser. Opt Laser Technol 98:97–10510.1016/j.optlastec.2017.07.037 ↗
38. Fang X, Liu H, Zhang J (2015) Reducing the under fill rate of pulsed laser welding of titanium alloy through the application of a transversal pre-extrusion load. J Mater Process Technol 220:124–13410.1016/j.jmatprotec.2015.01.015 ↗
39. Zhu B, Zhang G, Zou J et al (2021) Melt flow regularity and hump formation process during laser deep penetration welding. Opt Laser Technol 139:106950. https://doi.org/10.1016/j.optlastec.2021.10695010.1016/j.optlastec.2021.106950 ↗
40. Xiao X, Liu X, Cheng M et al (2020) Towards monitoring laser welding process via a coaxial pyrometer. J Mater Process Technol 277:116409. https://doi.org/10.1016/j.jmatprotec.2019.11640910.1016/j.jmatprotec.2019.116409 ↗
41. Doong JL, Wu CS, Hwang JR (1991) Infrared temperature sensing of laser welding. Int J Mach Tools Manuf 31:607–61610.1016/0890-6955(91)90040-A ↗
42. Nair AM, Muvvala G, Sarkar S et al (2020) Real-time detection of cooling rate using pyrometers in tandem in laser material processing and directed energy deposition. Mater Lett 277:128330. https://doi.org/10.1016/j.matlet.2020.12833010.1016/j.matlet.2020.128330 ↗
43. Stehr T, Hermsdorf J, Henning T et al (2010) Closed loop control for laser micro spot welding using fast pyrometer systems. Phys Procedia 5:465–47110.1016/j.phpro.2010.08.074 ↗
44. Gade R, Moeslund TB (2014) Thermal cameras and applications: a survey. Mach Vis Appl 25:245–26210.1007/s00138-013-0570-5 ↗
45. Al-Karawi J, Schmidt J (2004) Application of infrared thermography to the analysis of welding processes. In: Proceedings of the 2004 international conference on quantitative infrared thermography, QIRT Council, Belgium, July 5–8, H.9.1–H.9.610.21611/qirt.2004.077 ↗
46. Mathieu A, Matteï S, Deschamps A et al (2006) Temperature control in laser brazing of a steel/aluminium assembly using thermographic measurements. NDT E Int 39:272–27610.1016/j.ndteint.2005.08.005 ↗
47. Chen Z, Gao X (2014) Detection of weld pool width using infrared imaging during high-power fiber laser welding of type 304 austenitic stainless steel. Int J Adv Manuf Technol 74:1247–125410.1007/s00170-014-6081-3 ↗
48. Zhou J, Xia G, Zhou Z et al (2023) Comparison study of 6082 Al alloy laser welding using 455 nm blue laser and 1080 nm near-infrared laser. Optik 272:170224. https://doi.org/10.1016/j.ijleo.2022.17022410.1016/j.ijleo.2022.170224 ↗
49. Yu R, Guo S, Huang Y et al (2023) Prediction of variable-groove weld penetration using texture features of infrared thermal images and machine learning methods. J Mater Res Technol 23:1039–105110.1016/j.jmrt.2023.01.075 ↗
50. Vakili-Farahani F, Lungershausen J, Wasmer K (2017) Wavelet analysis of light emission signals in laser beam welding. J Laser Appl 29:022424. https://doi.org/10.2351/1.498350710.2351/1.4983507 ↗
51. Sanders PG, Leong KH, Keske JS et al (1998) Real-time monitoring of laser beam welding using infrared weld emissions. J Laser Appl 10:205–21110.2351/1.521853 ↗
52. Geiger M, Kägeler C, Schmidt M (2008) High-power laser welding of contaminated steel sheets. Prod Eng 2:235–24010.1007/s11740-008-0109-1 ↗
53. Zhang Y, Gao X, You D et al (2019) A low-cost welding status monitoring framework for high-power disk laser welding. IEEE Access 7:17365–1737610.1109/ACCESS.2019.2895836 ↗
54. Connolly JO, Beirne GJ, O’Connor GM et al (2000) Optical monitoring of laser generated plasma during laser welding. In: Haglund RF, Wood RF (eds) Laser plasma generation and diagnostics, SPIE-The International Society for Optical Engineering, Bellingham
55. Bruncko J, Uherek F (2003) Michalka M (2003) Monitoring of laser welding processes by optical emission spectroscopy. In: Hrabovsky M, Senderakova D, Tomanek P (eds) Photonics, devices, and systems I, SPIE-The International Society for Optical Engineering, Bellingham
56. Sebestova H, Chmelickova H, Nozka L et al (2012) Non-destructive real time monitoring of the laser welding process. J Mater Eng Perform 21:764–76910.1007/s11665-012-0193-4 ↗
57. Sibillano T, Rizzi D, Mezzapesa FP et al (2012) Closed loop control of penetration depth during CO2 laser lap welding processes. Sensors 12:11077–1109010.3390/s120811077 ↗
58. Saeed G, Zhang YM (2007) Weld pool surface depth measurement using a calibrated camera and structured light. Meas Sci Technol 18:2570. https://doi.org/10.1088/0957-0233/18/8/03310.1088/0957-0233/18/8/033 ↗
59. Wang L, Mohammadpour M, Gao X et al (2021) Adjustable ring mode (ARM) laser welding of stainless steels. Opt Lasers Eng 137:106360. https://doi.org/10.1016/j.optlaseng.2020.10636010.1016/j.optlaseng.2020.106360 ↗
60. Wang L, Mohammadpour M, Yang B et al (2020) Monitoring of keyhole entrance and molten pool with quality analysis during adjustable ring mode laser welding. Appl Opt 59:1576–158410.1364/AO.383232 ↗
61. Zhang Y, Gao X (2014) Analysis of characteristics of molten pool using cast shadow during high-power disk laser welding. Int J Adv Manuf Technol 70:1979–198810.1007/s00170-013-5442-7 ↗
62. Wang J, Wang C, Meng X et al (2012) Study on the periodic oscillation of plasma/vapour induced during high power fibre laser penetration welding. Opt Laser Technol 44:67–7010.1016/j.optlastec.2011.05.020 ↗
63. Sun D, Cai Y, Wang Y et al (2014) Effect of He-Ar ratio of side assisting gas on plasma 3D formation during CO2 laser welding. Opt Lasers Eng 56:41–4910.1016/j.optlaseng.2013.12.009 ↗
64. Gao X, Wen Q, Katayama S (2013) Analysis of high-power disk laser welding stability based on classification of plume and spatter characteristics. Trans Nonferrous Met Soc China 23:3748–375710.1016/S1003-6326(13)62925-8 ↗
65. Tenner F, Brock C, Klämpfl F et al (2015) Analysis of the correlation between plasma plume and keyhole behavior in laser metal welding for the modeling of the keyhole geometry. Opt Lasers Eng 64:32–4110.1016/j.optlaseng.2014.07.009 ↗
66. Zhang X, Tang Z, Wu Y et al (2022) Progress in in situ X-ray imaging of welding process. Rev Sci Instrum 93:071501. https://doi.org/10.1063/5.007404210.1063/5.0074042 ↗
67. Boley M, Abt F, Weber R et al (2013) X-ray and optical videography for 3D measurement of capillary and melt pool geometry in laser welding. Phys Procedia 41:488–49510.1016/j.phpro.2013.03.105 ↗
68. Kaplan AFH, Mizutani M, Katayama S et al (2003) On the mechanism of pore formation during keyhole laser spot welding. In: Miyamoto I, Kobayashi KF, Sugioka K et al (eds) First international symposium on high-power laser macroprocessing, SPIE-the International Society for Optics and Photonics, Bellingham
69. Mai TA, Spowage AC (2004) Characterisation of dissimilar joints in laser welding of steel-kovar, copper-steel and copper-aluminium. Mater Sci Eng A 374:224–23310.1016/j.msea.2004.02.025 ↗
70. Yamada T, Shobu T, Nishimura A et al (2012) In-situ X-ray observation of molten pool depth during laser micro welding. J Laser Micro Nanoeng 7:244–24810.2961/jlmn.2012.03.0002 ↗
71. Heider A, Sollinger J, Abt F et al (2013) High-speed X-ray analysis of spatter formation in laser welding of copper. Phys Procedia 41:112–11810.1016/j.phpro.2013.03.058 ↗
72. Zhan X, Bu X, Qin T et al (2017) X-ray online detection for laser welding T-joint of Al-Li alloy. Mod Phys Lett B 31:1750154. https://doi.org/10.1142/S021798491750154810.1142/S0217984917501548 ↗
73. Cunningham R, Zhao C, Parab N et al (2019) Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed X-ray imaging. Science 363(6429):849–85210.1126/science.aav4687 ↗
74. Dupriez ND, Denkl A (2017) Advances of OCT technology for laser beam processing: precision and quality during laser welding. Laser Tech J 14:34–3810.1002/latj.201700021 ↗
75. Boley M, Fetzer F, Weber R et al (2019) Statistical evaluation method to determine the laser welding depth by optical coherence tomography. Opt Lasers Eng 119:56–6410.1016/j.optlaseng.2019.03.014 ↗
76. Lohaus L, Bautze T, Diepold K (2010) Evaluation of optical sensors for laser welding in a technical cognitive environment. In: International congress on applications of lasers & electro-optics. Laser Institute of America, Anaheim, California, USA. https://doi.org/10.2351/1.506201510.2351/1.5062015 ↗
77. Schmitt R, Mallmann G, Devrient M et al (2014) 3D polymer weld seam characterization based on optical coherence tomography for laser transmission welding applications. Phys Procedia 56:1305–131410.1016/j.phpro.2014.08.055 ↗
78. Dorsch F, Harrer T, Haug P et al (2016) Process control using capillary depth measurement. In: International congress on applications of lasers & electro-optics. Laser Institute of America, San Diego, California, USA. https://doi.org/10.2351/1.511855010.2351/1.5118550 ↗
79. Dorsch F, Dubitzky W, Effing L et al (2017) Capillary depth measurement for process control. In: Kaierle S, Heinemann SW(eds) High-power laser materials processing: applications, diagnostics, and systems vol 10097, SPIE, San Francisco, California, United States, p 100970810.1117/12.2250108 ↗
80. Schmoeller M, Stadter C, Liebl S et al (2019) Inline weld depth measurement for high brilliance laser beam sources using optical coherence tomography. J Laser Appl 31:022409. https://doi.org/10.2351/1.509610410.2351/1.5096104 ↗
81. Mittelstädt C, Mattulat T, Seefeld T et al (2019) Novel approach for weld depth determination using optical coherence tomography measurement in laser deep penetration welding of aluminum and steel. J Laser Appl 31:022007. https://doi.org/10.2351/1.508226310.2351/1.5082263 ↗
82. Authier N, Touzet E, Lücking F et al (2020) Coupled membrane free optical microphone and optical coherence tomography keyhole measurements to setup welding laser parameters. In: Kaierle S, Heinemann SW (eds) High-power laser materials processing: applications, diagnostics, and systems, vol 9, SPIE, San Francisco
83. Sokolov M, Franciosa P, Sun T et al (2021) Applying optical coherence tomography for weld depth monitoring in remote laser welding of automotive battery tab connectors. J Laser Appl 33:012028. https://doi.org/10.2351/7.000033610.2351/7.0000336 ↗
84. Ma D, Jiang P, Shu L et al (2023) DBN-based online identification of porosity regions during laser welding of aluminum alloys using coherent optical diagnosis. Opt Laser Technol 165:109597. https://doi.org/10.1016/j.optlastec.2023.10959710.1016/j.optlastec.2023.109597 ↗
85. Gao X, Chen Y (2014) Detection of micro gap weld using magneto-optical imaging during laser welding. Int J Adv Manuf Technol 73:23–3310.1007/s00170-014-5811-x ↗
86. Gao X, Huang G, You D et al (2017) Magneto-optical imaging deviation model of micro-gap weld joint. J Manuf Syst 42:82–9210.1016/j.jmsy.2016.11.005 ↗
87. Gao X, Mo L, You D et al (2017) Tight butt joint weld detection based on optical flow and particle filtering of magneto-optical imaging. Mech Syst Signal Process 96:16–3010.1016/j.ymssp.2017.04.001 ↗
88. Li Y, Gao X, Chen Y et al (2021) Modeling for tracking micro gap weld based on magneto-optical sensing and kalman filtering. IEEE Sens J 21:11598–1161410.1109/JSEN.2020.3040600 ↗
89. You D, Gao X, Katayama S (2016) Data-driven based analyzing and modeling of MIMO laser welding process by integration of six advanced sensors. Int J Adv Manuf Technol 82:1127–113910.1007/s00170-015-7455-x ↗
90. Norman P, Engstroem H, Kaplan AFH (2008) Theoretical analysis of photodiode monitoring of laser welding defects by imaging combined with modelling. J Phys Appl Phys 41:195502. https://doi.org/10.1088/0022-3727/41/19/19550210.1088/0022-3727/41/19/195502 ↗
91. Liu W, Liu S, Ma J et al (2014) Real-time monitoring of the laser hot-wire welding process. Opt Laser Technol 57:66–7610.1016/j.optlastec.2013.09.026 ↗
92. Li S, Chen G, Katayama S et al (2014) Relationship between spatter formation and dynamic molten pool during high-power deep-penetration laser welding. Appl Surf Sci 303:481–48810.1016/j.apsusc.2014.03.030 ↗
93. You D, Gao X, Katayama S (2015) A Novel stability quantification for disk laser welding by using frequency correlation coefficient between multiple-optics signals. IEEE/ASME Trans Mechatron 20:327–33710.1109/TMECH.2014.2311097 ↗
94. Volpp J (2017) Keyhole stability during laser welding—part II: process pores and spatters. Prod Eng 11:9–1810.1007/s11740-016-0705-4 ↗
95. Liu G, Gao X, You D et al (2019) Prediction of high power laser welding status based on PCA and SVM classification of multiple sensors. J Intell Manuf 30:821–83210.1007/s10845-016-1286-y ↗
96. von Witzendorff P, Kaierle S, Suttmann O et al (2015) Using pulse shaping to control temporal strain development and solidification cracking in pulsed laser welding of 6082 aluminum alloys. J Mater Process Technol 225:162–16910.1016/j.jmatprotec.2015.06.007 ↗
97. Gao X, You D, Katayama S (2012) Infrared image recognition for seam tracking monitoring during fiber laser welding. Mechatronics 22:370–38010.1016/j.mechatronics.2011.09.005 ↗
98. You D, Gao X, Katayama S (2014) Monitoring of high-power laser welding using high-speed photographing and image processing. Mech Syst Signal Process 49:39–5210.1016/j.ymssp.2013.10.024 ↗
99. Olsson R, Eriksson I, Powell J et al (2011) Advances in pulsed laser weld monitoring by the statistical analysis of reflected light. Opt Lasers Eng 49:1352–135910.1016/j.optlaseng.2011.05.010 ↗
100. Wu D, Huang Y, Zhang P et al (2020) Visual-acoustic penetration recognition in variable polarity plasma arc welding process using hybrid deep learning approach. IEEE Access 8:120417–12042810.1109/ACCESS.2020.3005822 ↗