journal article·2018-03

Microstructure evolution of Al-Si-10Mg in direct metal laser sintering using phase-field modeling

Jyotirmoy Nandy, Hrushikesh Sarangi, Seshadev Sahoo

Advances in Manufacturing· Volume 6· Issue 1
Publisher page

Abstract

Direct metal laser sintering (DMLS) has evolved as a popular technique in additive manufacturing, which produces metallic parts layer-by-layer by the application of laser power. DMLS is a rapid manufacturing process, and the properties of the build material depend on the sintering mechanism as well as the microstructure of the build material. Thus, the prediction of part microstructures during the process may be a key factor for process optimization. In addition, the process parameters play a crucial role in the microstructure evolution, and need to be controlled effectively. In this study, the microstructure evolution of Al-Si-10Mg alloy in DMLS process is studied with the help of the phase field modeling. A MATLAB code is used to solve the phase field equations, where the simulation parameters include temperature gradient, laser power and scan speed. From the simulation result, it is found that the temperature gradient plays a significant role in the evolution of microstructure with different process parameters. In a single-seed simulation, the growth of the dendritic structure increases with the increase in the temperature gradient. When considering multiple seeds, the increasing in temperature gradients leads to the formation of finer dendrites; however, with increasing time, the dendrites join and grain growth are seen to be controlled at the interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Noorani R (2006) Rapid prototyping: principles and applications. Wiley, London
2. Chua CK, Chou SM, Lin SC et al (1998) Rapid prototyping assisted surgery planning. Int J Adv Manuf Technol 14(9):624–63010.1007/BF01192281 ↗
3. Kelly SM, Kampe SL (2004) Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds part I: microstructural characterization. Metall Mater Trans 35(6):1861–186710.1007/s11661-004-0094-8 ↗
4. Brandl E, Baufeld B, Leyens C et al (2010) Additive manufactured Ti-6Al-4V using welding wire: comparison of laser and arc beam deposition and evaluation with respect to aerospace material specifications. Phys Proc 5:595–60610.1016/j.phpro.2010.08.087 ↗
5. Dinda GP, Song L, Mazumder J (2008) Fabrication of Ti-6Al-4V scaffolds by direct metal deposition. Metall Mater Trans A 39(12):2914–292210.1007/s11661-008-9634-y ↗
6. Thompson SM, Bian L, Shamsaei N et al (2015) An overview of direct laser deposition for additive manufacturing part I: transport phenomena, modeling and diagnostics. Addit Manuf 8:36–6210.1016/j.addma.2015.07.001 ↗
7. Shamsaei N, Yadollahi A, Bian L et al (2015) An overview of direct laser deposition for additive manufacturing part II: mechanical behavior, process parameter optimization and control. Addit Manuf 8:12–3510.1016/j.addma.2015.07.002 ↗
8. Cabrini M, Lorenzi S, Pastore T et al (2016) Evaluation of corrosion resistance of Al-10Si-Mg alloy obtained by means of direct metal laser sintering. J Mater Process Technol 231:326–33510.1016/j.jmatprotec.2015.12.033 ↗
9. Chen LQ (2002) Phase-field models for microstructure evolution. Annu Rev Mater Res 32(1):113–14010.1146/annurev.matsci.32.112001.132041 ↗
10. Das P, Dutta P (2016) Phase field modeling of microstructure evolution and ripening driven grain growth during cooling slope processing of A356 Al alloy. Comput Mater Sci 125:8–1910.1016/j.commatsci.2016.08.022 ↗
11. Du L, Zhang R (2014) Phase field simulation of dendrite growth with boundary heat flux. Integr Mater Manuf Innov 3(1):1–510.1186/s40192-014-0018-4 ↗
12. Kazaryan A, Wang Y, Dregia SA et al (2000) Generalized phase-field model for computer simulation of grain growth in anisotropic systems. Phys Rev B 61(21):1427510.1103/PhysRevB.61.14275 ↗
13. Mamivand M, Zaeem MA, El Kadiri H (2013) A review on phase field modeling of martensitic phase transformation. Comput Mater Sci 77:304–31110.1016/j.commatsci.2013.04.059 ↗
14. Sciarra G (2016) Phase field modeling of partially saturated deformable porous media. J Mech Phys Solids 94:230–25610.1016/j.jmps.2016.04.018 ↗
15. Gránásy L, Pusztai T, Warren JA (2004) Modelling polycrystalline solidification using phase field theory. J Phys Condens Matter 16(41):R120510.1088/0953-8984/16/41/R01 ↗
16. Ganeriwala R, Zohdi TI (2014) Multiphysics modeling and simulation of selective laser sintering manufacturing processes. Proc CIRP 14:299–30410.1016/j.procir.2014.03.015 ↗
17. Sahoo S, Chou K (2016) Phase-field simulation of microstructure evolution of Ti-6Al-4V in electron beam additive manufacturing process. Addit Manuf 9:14–2410.1016/j.addma.2015.12.005 ↗
18. Sahoo S (2014) Microstructure simulation of Ti-6Al-4V biomaterial produced by electron beam additive manufacturing process. Int J Nano Biomater 5(4):228–23510.1504/IJNBM.2014.069811 ↗
19. Karma A (2001) Phase-field formulation for quantitative modeling of alloy solidification. Phys Rev Lett 87(11):11570110.1103/PhysRevLett.87.115701 ↗
20. Tan W, Bailey NS, Shin YC (2011) A novel integrated model combining cellular automata and phase field methods for microstructure evolution during solidification of multi-component and multi-phase alloys. Comput Mater Sci 50(9):2573–258510.1016/j.commatsci.2011.03.044 ↗
21. Fallah V, Amoorezaei M, Provatas N et al (2012) Phase-field simulation of solidification morphology in laser powder deposition of Ti-Nb alloys. Acta Mater 60(4):1633–164610.1016/j.actamat.2011.12.009 ↗
22. Gong X, Chou K (2015) Phase-field modeling of microstructure evolution in electron beam additive manufacturing. JOM 67(5):1176–118210.1007/s11837-015-1352-5 ↗
23. Biswas S, Schwen D, Singh J et al (2016) A study of the evolution of microstructure and consolidation kinetics during sintering using a phase field modeling based approach. Extreme Mech Lett 7:78–8910.1016/j.eml.2016.02.017 ↗
24. Holfelder P, Lu JM, Krempaszky C et al (2016) A phase field approach for modeling melting and re-solidification of Ti-6Al-4V during selective laser melting. Key Eng Mater 704:241–25010.4028/www.scientific.net/KEM.704.241 ↗
25. Hang K, Mastorakos I (2017) Phase field crystal simulation of grain growth in BCC metals during additive manufacturing. MRS Adv 2(16):887–89610.1557/adv.2017.73 ↗
26. Kundin J, Mushongera L, Emmerich H (2015) Phase-field modeling of microstructure formation during rapid solidification in Inconel 718 super alloy. Acta Mater 95:343–35610.1016/j.actamat.2015.05.052 ↗
27. Nandy J, Sarangi H, Sahoo S (2017) Modeling of microstructure evolution in direct metal laser sintering: a phase field approach. Mater Sci Eng 178:1–8