Computational approaches in bioprinting processes
Source abstract
Abstract
Bioprinting technologies often require repeated experimental trials to optimize operational parameters and characterize bioprinted constructs. In this context, computational simulations have emerged as a powerful complementary tool, enabling them to analyse the bioprinting processes and address the distinct challenges associated with each technique. By predicting bioink behaviours, evaluating shear stress effects and enhancing printability, simulations can substantially streamline bioprinting workflows and provide insights that are difficult to obtain experimentally. This Review examines computational approaches for the three principal bioprinting strategies: extrusion-based, droplet-based and light-based methods. We begin with a concise overview of each technique, followed by a discussion of bioink rheology, an essential factor for accurate in silico modelling. We then outline the fundamental theoretical frameworks and primary computational methodologies used to simulate each process, along with the key challenges that remain. Next, we highlight major applications of computational simulations in bioprinting, including nozzle designs, printability assessments and photopolymerization predictions. We finally conclude by discussing emerging directions in which simulation-based approaches could further accelerate advances in the field.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D Printing in Biomedical Research · Nanomaterials and Printing Technologies · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Moroni, L. et al. Biofabrication strategies for 3D in vitro models and regenerative medicine. Nat. Rev. Mater. 3, 21–37 (2018).10.1038/s41578-018-0006-y ↗
2. Zhang, Y. S. & Khademhosseini, A. Advances in engineering hydrogels. Science 356, eaaf3627 (2017).10.1126/science.aaf3627 ↗
3. Murphy, S. V. & Atala, A. 3D bioprinting of tissues and organs. Nat. Biotechnol. 32, 773–785 (2014).10.1038/nbt.2958 ↗
4. Agarwal, T. et al. 3D bioprinting in tissue engineering: current state-of-the-art and challenges towards system standardization and clinical translation. Biofabrication 17, 042003 (2025).10.1088/1758-5090/ade47a ↗
5. Zhang, Y. S., Dolatshahi-Pirouz, A. & Orive, G. Regenerative cell therapy with 3D bioprinting. Science 385, 604–606 (2024).10.1126/science.add8593 ↗
6. Rahimi-Gorji, M. et al. Optimization of intraperitoneal aerosolized drug delivery using computational fluid dynamics (CFD) modeling. Sci. Rep. 12, 6305 (2022).10.1038/s41598-022-10369-8 ↗
7. Mishra, S., Kumar, V., Sarkar, J. & Rathore, A. S. CFD based mass transfer modeling of a single use bioreactor for production of monoclonal antibody biotherapeutics. Chem. Eng. J. 412, 128592 (2021).10.1016/j.cej.2021.128592 ↗
8. Ferreira, M. et al. Advances in microfluidic systems and numerical modeling in biomedical applications: a review. Micromachines 15, 873 (2024).10.3390/mi15070873 ↗
9. Omar, A. M. et al. Geometry-based computational fluid dynamic model for predicting the biological behavior of bone tissue engineering scaffolds. J. Funct. Biomater. 13, 104 (2022).10.3390/jfb13030104 ↗
10. Cao, B. et al. Studying the influence of finite element mesh size on the accuracy of ventricular tachycardia simulation. Rev. Cardiovasc. Med. 24, 351 (2023).10.31083/j.rcm2412351 ↗
11. Fareez, U. N. M., Naqvi, S. A. A., Mahmud, M. & Temirel, M. Computational fluid dynamics (CFD) analysis of bioprinting. Adv. Healthc. Mater. 13, e2400643 (2024).10.1002/adhm.202400643 ↗
12. Malekpour, A. & Chen, X. Printability and cell viability in extrusion-based bioprinting from experimental, computational, and machine learning views. J. Funct. Biomater. 13, 40 (2022).10.3390/jfb13020040 ↗
13. Shi, J. et al. Shear stress analysis and its effects on cell viability and cell proliferation in drop-on-demand bioprinting. Biomed. Phys. Eng. Express 4, 045028 (2018).10.1088/2057-1976/aac946 ↗
14. Göhl, J. et al. Simulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks. Biofabrication 10, 034105 (2018). A key study combining computational simulations and experimental measurements to establish quantitative metrics for predicting extrusion bioink printability.10.1088/1758-5090/aac872 ↗
15. Shi, J., Song, J., Song, B. & Lu, W. F. Multi-objective optimization design through machine learning for drop-on-demand bioprinting. Engineering 5, 586–593 (2019).10.1016/j.eng.2018.12.009 ↗
16. Gómez-Blanco, J. C. et al. Computational simulation-based comparative analysis of standard 3D printing and conical nozzles for pneumatic and piston-driven bioprinting. Int. J. Bioprinting 9, 730 (2023).10.18063/ijb.730 ↗
17. Ates, G. & Bartolo, P. Computational fluid dynamics for the optimization of internal bioprinting parameters and mixing conditions. Int. J. Bioprinting 9, 0219 (2023).10.36922/ijb.0219 ↗
18. Ning, L., Betancourt, N., Schreyer, D. J. & Chen, X. Characterization of cell damage and proliferative ability during and after bioprinting. ACS Biomater. Sci. Eng. 4, 3906–3918 (2018). A key study integrating computational simulations and experimental measurements to quantify cell damages caused by shear and extensional stresses during extrusion bioprinting.10.1021/acsbiomaterials.8b00714 ↗
19. Shi, J. et al. Learning-based cell injection control for precise drop-on-demand cell printing. Ann. Biomed. Eng. 46, 1267–1279 (2018). A key study combining computational fluid dynamics, machine learning and experimental validations to investigate droplet formation and jet stability in inkjet bioprinting.10.1007/s10439-018-2054-2 ↗
20. Kang, R. et al. 3D bioprinting technology and equipment based on microvalve control. Biotechnol. Bioeng. 121, 3768–3781 (2024).10.1002/bit.28850 ↗
21. Jiang, L., Yu, L., Premaratne, P., Zhang, Z. & Qin, H. CFD-based numerical modeling to predict the dimensions of printed droplets in electrohydrodynamic inkjet printing. J. Manuf. Process. 66, 125–132 (2021).10.1016/j.jmapro.2021.04.003 ↗
22. Moghadasi, H., Mollah, M. T., Marla, D., Saffari, H. & Spangenberg, J. Computational fluid dynamics modeling of top-down digital light processing additive manufacturing. Polymers 15, 2459 (2023).10.3390/polym15112459 ↗
23. Zhang, Q. et al. Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing. Extreme Mech. Lett. 48, 101403 (2021). A foundational study on photopolymerization simulations and evolution of material properties in DLP-fabricated constructs.10.1016/j.eml.2021.101403 ↗
24. Zhang, S., Vijayavenkataraman, S., Lu, W. F. & Fuh, J. Y. A review on the use of computational methods to characterize, design and optimize tissue engineering scaffolds, with a potential in 3D printing fabrication. J. Biomed. Mater. Res. Part B Appl. Biomater. 107, 1329–1351 (2019).10.1002/jbm.b.34226 ↗
25. Ahmadi Soufivand, A., Lee, S. J., Jüngst, T. & Budday, S. Challenges and perspectives in using finite element modeling to advance 3D bioprinting. Prog. Biomed. Eng. 7, 032004 (2025). A key review of modelling extrusion bioprinting highlighting computational simulation strategies across pre-printing, printing and post-printing stages while outlining the challenges that remain.10.1088/2516-1091/addb19 ↗
26. Carracciuolo, L. & D’Amora, U. Mathematical tools for simulation of 3D bioprinting processes on high-performance computing resources: the state of the art. Appl. Sci. 14, 6110 (2024).10.3390/app14146110 ↗
27. Gupta, D. & Negi, N. P. 3D bioprinting: printing the future and recent advances. Bioprinting 27, e00211 (2022).10.1016/j.bprint.2022.e00211 ↗
28. Schwab, A. et al. Printability and shape fidelity of bioinks in 3D bioprinting. Chem. Rev. 120, 11028–11055 (2020).10.1021/acs.chemrev.0c00084 ↗
29. Li, X. et al. Inkjet bioprinting of biomaterials. Chem. Rev. 120, 10793–10833 (2020).10.1021/acs.chemrev.0c00008 ↗
30. Amorim, P. A. et al. Insights on shear rheology of inks for extrusion-based 3D bioprinting. Bioprinting 22, e00129 (2021).10.1016/j.bprint.2021.e00129 ↗
31. Bird, R. B., Armstrong, R. C. & Hassager, O. Dynamics of Polymeric Liquids 2nd edn, Vol. 1 (Wiley, 1987).
32. Bird, R. B., Armstrong, R. C. & Hassager, O. Dynamics of Polymeric Liquids 2nd edn, Vol. 2 (Wiley, 1987).
33. Bercea, M. Rheology as a tool for fine-tuning the properties of printable bioinspired gels. Molecules 28, 2766 (2023).10.3390/molecules28062766 ↗
34. Yu, S., Luo, Y., Chen, S., Fan, J. & Zhang, H. Quantitative assessment of hydrogel printability in extrusion bioprinting. Gels 12, 189 (2026).10.3390/gels12030189 ↗
35. Gao, T. et al. Optimization of gelatin–alginate composite bioink printability using rheological parameters: a systematic approach. Biofabrication 10, 034106 (2018).10.1088/1758-5090/aacdc7 ↗
36. Sánchez-Sánchez, R., Rodríguez-Rego, J. M., Macías-García, A., Mendoza-Cerezo, L. & Díaz-Parralejo, A. Relationship between shear-thinning rheological properties of bioinks and bioprinting parameters. Int. J. Bioprinting 9, 687 (2023).10.18063/ijb.687 ↗
37. Herschel, W. H. & Bulkley, R. Konsistenzmessungen von gummi-benzollösungen. Kolloid-Zeitschrift 39, 291–300 (1926).10.1007/BF01432034 ↗
38. Sahu, K., Valluri, P., Spelt, P. & Matar, O. Linear instability of pressure-driven channel flow of a Newtonian and a Herschel-Bulkley fluid. Phys. Fluids 19, 122101 (2007).10.1063/1.2814385 ↗
39. Kim, E. & Baek, J. Numerical study on the effects of non-dimensional parameters on drop-on-demand droplet formation dynamics and printability range in the up-scaled model. Phys. Fluids 24, 082103 (2012).10.1063/1.4742913 ↗
40. Wijshoff, H. The dynamics of the piezo inkjet printhead operation. Phys. Rep. 491, 77–177 (2010).10.1016/j.physrep.2010.03.003 ↗
41. Levato, R. et al. Light-based vat-polymerization bioprinting. Nat. Rev. Methods Primers 3, 47 (2023).10.1038/s43586-023-00231-0 ↗
42. Na, K. et al. Effect of solution viscosity on retardation of cell sedimentation in DLP 3D printing of gelatin methacrylate/silk fibroin bioink. J. Ind. Eng. Chem. 61, 340–347 (2018).10.1016/j.jiec.2017.12.032 ↗
43. Lapique, F. & Redford, K. Curing effects on viscosity and mechanical properties of a commercial epoxy resin adhesive. Int. J. Adhes. Adhes. 22, 337–346 (2002).10.1016/S0143-7496(02)00013-1 ↗
44. Alparslan, C. & Bayraktar, Ş. Advances in digital light processing (DLP) bioprinting: a review of biomaterials and its applications, innovations, challenges, and future perspectives. Polymers 17, 1287 (2025).10.3390/polym17091287 ↗
45. Zhao, Z. et al. Origami by frontal photopolymerization. Sci. Adv. 3, e1602326 (2017).10.1126/sciadv.1602326 ↗
46. Thalhamer, A., Fuchs, P., Strohmeier, L., Hasil, S. & Wolfberger, A. A simulation-based assessment of print accuracy for microelectronic parts manufactured with DLP 3D printing process. In Proc. 2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (IEEE, 2022).10.1109/EuroSimE54907.2022.9758869 ↗
47. White, S. R. & Hahn, H. T. Process modeling of composite materials: residual stress development during cure. Part I. Model formulation. J. Compos. Mater. 26, 2402–2422 (1992).10.1177/002199839202601604 ↗
48. Wu, X., Xu, C., Zhang, Z. & Guo, C. Modeling and visualization of layered curing conversion profile in ceramic mask projection stereolithography process. Ceram. Int. 46, 25750–25757 (2020).10.1016/j.ceramint.2020.07.053 ↗
49. Zawawi, M. H. et al. A review: fundamentals of computational fluid dynamics (CFD). AIP Conf. Proc. 2030, 020252 (2018).10.1063/1.5066893 ↗
50. Mao, J., Li, F., Wang, S., Zhao, L. & Di, Y. A CFD-FEM-IBM simulation scheme for the strong coupling between the fluid and the structure with large deformations and movements. Comput. Struct. 310, 107673 (2025).10.1016/j.compstruc.2025.107673 ↗
51. Jeong, W. & Seong, J. Comparison of effects on technical variances of computational fluid dynamics (CFD) software based on finite element and finite volume methods. Int. J. Mech. Sci. 78, 19–26 (2014).10.1016/j.ijmecsci.2013.10.017 ↗
52. Sourov, M. A. et al. A general simulation-based study on printability of inks in direct ink writing. Sci. Rep. 15, 1–16 (2025).10.1038/s41598-024-74058-4 ↗
53. Majeed, R. et al. Parallel implementation of FEM solver for shared memory using OpenMP. Math. Probl. Eng. 2022, 2375102 (2022).10.1155/2022/2375102 ↗
54. Galloway, M. et al. Implementation of nozzle motion for material extrusion additive manufacturing in Ansys Fluent. Virtual Phys. Prototyp. 19, e2397816 (2024).10.1080/17452759.2024.2397816 ↗
55. Nooranidoost, M., Izbassarov, D., Tasoglu, S. & Muradoglu, M. A computational study of droplet-based bioprinting: effects of viscoelasticity. Phys. Fluids 31, 081901 (2019).10.1063/1.5108824 ↗
56. Mézel, C., Souquet, A., Hallo, L. & Guillemot, F. Bioprinting by laser-induced forward transfer for tissue engineering applications: jet formation modeling. Biofabrication 2, 014103 (2010).10.1088/1758-5082/2/1/014103 ↗
57. Jarauta, A., Ryzhakov, P., Secanell, M., Waghmare, P. R. & Pons-Prats, J. Numerical study of droplet dynamics in a polymer electrolyte fuel cell gas channel using an embedded Eulerian-Lagrangian approach. J. Power Sources 323, 201–212 (2016).10.1016/j.jpowsour.2016.05.030 ↗
58. Biswas, R. & Strawn, R. C. Tetrahedral and hexahedral mesh adaptation for CFD problems. Appl. Numer. Math. 26, 135–151 (1998).10.1016/S0168-9274(97)00092-5 ↗
59. Xie, Z. et al. Adaptive unstructured mesh modelling of multiphase flows. Int. J. Multiph. Flow 67, 104–110 (2014).10.1016/j.ijmultiphaseflow.2014.08.002 ↗
60. Panton, R. L. Incompressible Flow (Wiley, 2024).
61. Gharraei, R., Bergstrom, D. J. & Chen, X. Extrusion bioprinting from a fluid mechanics perspective. Int. J. Bioprinting 10, 3973 (2024).10.36922/ijb.3973 ↗
62. Gerhart, A. L., Hochstein, J. I. & Gerhart, P. M. Munson, Young and Okiishi’s Fundamentals of Fluid Mechanics (Wiley, 2020).
63. Blanco, J. C. G. et al. Optimising bioprinting nozzles through computational modelling and design of experiments. Biomimetics 9, 460 (2024).10.3390/biomimetics9080460 ↗
64. Wei, Q., An, Y., Li, M. & Zhao, X. Research on the flow behavior of bio-ink inside the extrusion nozzle during printing. J. Appl. Phys. 136, 174701 (2024).10.1063/5.0234193 ↗
65. Landau, L. D. & Lifshitz, E. M. Fluid Mechanics (Elsevier, 1987).
66. Müller, M., Öztürk, E., Arlov, Ø, Gatenholm, P. & Zenobi-Wong, M. Alginate sulfate–nanocellulose bioinks for cartilage bioprinting applications. Ann. Biomed. Eng. 45, 210–223 (2016).10.1007/s10439-016-1704-5 ↗
67. Liu, W. et al. Extrusion bioprinting of shear-thinning gelatin methacryloyl bioinks. Adv. Healthc. Mater. 6, 1601451 (2017).10.1002/adhm.201601451 ↗
68. Chan, K., Pericleous, K. & Cross, M. Numerical simulation of flows encountered during mold-filling. Appl. Math. Model. 15, 624–631 (1991).10.1016/S0307-904X(09)81008-1 ↗
69. Tryggvason, G., Scardovelli, R. & Zaleski, S. Direct Numerical Simulations of Gas–Liquid Multiphase Flows (Cambridge Univ. Press, 2011).
70. Albadawi, A., Donoghue, D., Robinson, A., Murray, D. & Delauré, Y. On the assessment of a VOF based compressive interface capturing scheme for the analysis of bubble impact on and bounce from a flat horizontal surface. Int. J. Multiph. Flow 65, 82–97 (2014).10.1016/j.ijmultiphaseflow.2014.05.017 ↗
71. Bilger, C., Aboukhedr, M., Vogiatzaki, K. & Cant, R. S. Evaluation of two-phase flow solvers using level set and volume of fluid methods. J. Comput. Phys. 345, 665–686 (2017).10.1016/j.jcp.2017.05.044 ↗
72. Hartmann, D., Meinke, M. & Schröder, W. The constrained reinitialization equation for level set methods. J. Comput. Phys. 229, 1514–1535 (2010).10.1016/j.jcp.2009.10.042 ↗
73. Hartmann, D., Meinke, M. & Schröder, W. On accuracy and efficiency of constrained reinitialization. Int. J. Numer. Methods Fluids 63, 1347–1358 (2010).10.1002/fld.2135 ↗
74. Osher, S. & Fedkiw, R. P. Level set methods: an overview and some recent results. J. Comput. Phys. 169, 463–502 (2001).10.1006/jcph.2000.6636 ↗
75. Sussman, M., Smereka, P. & Osher, S. A level set approach for computing solutions to incompressible two-phase flow. J. Comput. Phys. 114, 146–159 (1994).10.1006/jcph.1994.1155 ↗
76. Kim, H. & Park, S. Coupled level-set and volume of fluid (CLSVOF) solver for air lubrication method of a flat plate. J. Mar. Sci. Eng. 9, 231 (2021).10.3390/jmse9020231 ↗
77. Kasmaiee, S., Tadjfar, M., Kasmaiee, S. & Ahmadi, G. Linear stability analysis of surface waves of liquid jet injected in transverse gas flow with different angles. Theor. Comput. Fluid Dyn. 38, 107–138 (2024).10.1007/s00162-024-00685-2 ↗
78. Ouyang, L. Study on Microextrusion-Based 3D Bioprinting and Bioink Crosslinking Mechanisms (Springer, 2019).10.1007/978-981-13-9455-3 ↗
79. Brackbill, J. U., Kothe, D. B. & Zemach, C. A continuum method for modeling surface tension. J. Comput. Phys. 100, 335–354 (1992).10.1016/0021-9991(92)90240-Y ↗
80. Gueyffier, D., Li, J., Nadim, A., Scardovelli, R. & Zaleski, S. Volume-of-fluid interface tracking with smoothed surface stress methods for three-dimensional flows. J. Comput. Phys. 152, 423–456 (1999).10.1006/jcph.1998.6168 ↗
81. Loghman, F., Kami, A., Azami, M. & Abedini, V. Numerical study on the influence of process parameters in direct ink writing of high viscosity bio-inks. Proc. Inst. Mech. Eng. L 237, 274–282 (2022).
82. Liravi, F., Darleux, R. & Toyserkani, E. Additive manufacturing of 3D structures with non-Newtonian highly viscous fluids: finite element modeling and experimental validation. Addit. Manuf. 13, 113–123 (2017).
83. Gómez-Blanco, J. C. et al. Bioink temperature influence on shear stress, pressure and velocity using computational simulation. Processes 8, 865 (2020).10.3390/pr8070865 ↗
84. Song, K., Zhang, D., Yin, J. & Huang, Y. Computational study of extrusion bioprinting with jammed gelatin microgel-based composite ink. Addit. Manuf. 41, 101963 (2021).
85. Emmermacher, J. et al. Engineering considerations on extrusion-based bioprinting: interactions of material behavior, mechanical forces and cells in the printing needle. Biofabrication https://doi.org/10.1088/1758-5090/ab7553 (2020).10.1088/1758-5090/ab7553 ↗
86. Zaeri, A., Zgeib, R., Cao, K., Zhang, F. & Chang, R. C. Numerical analysis on the effects of microfluidic-based bioprinting parameters on the microfiber geometrical outcomes. Sci. Rep. https://doi.org/10.1038/s41598-022-07392-0 (2022). A key study presenting computational modelling of coaxial bioprinting to investigate flow behaviours and the formation of core–shell hydrogel filaments.10.1038/s41598-022-07392-0 ↗
87. Chand, R., Muhire, B. S. & Vijayavenkataraman, S. Computational fluid dynamics assessment of the effect of bioprinting parameters in extrusion bioprinting. Int. J. Bioprinting 8, 545 (2022).10.18063/ijb.v8i2.545 ↗
88. Reid, J. A. et al. Accessible bioprinting: adaptation of a low-cost 3D-printer for precise cell placement and stem cell differentiation. Biofabrication https://doi.org/10.1088/1758-5090/8/2/025017 (2016).10.1088/1758-5090/8/2/025017 ↗
89. Guo, C.-F., Zhang, M. & Bhandari, B. A comparative study between syringe-based and screw-based 3D food printers by computational simulation. Comput. Electron. Agric. 162, 397–404 (2019).10.1016/j.compag.2019.04.032 ↗
90. Magalhães, I. P., Oliveira, P. M. D., Dernowsek, J., Casas, E. B. L. & Casas, M. S. L. Investigation of the effect of nozzle design on rheological bioprinting properties using computational fluid dynamics. Matéria https://doi.org/10.1590/s1517-707620190003.0714 (2019).10.1590/s1517-707620190003.0714 ↗
91. Ramezani, H., Mohammad Mirjamali, S. & He, Y. Simulations of extrusion 3D printing of chitosan hydrogels. Appl. Sci. https://doi.org/10.3390/app12157530 (2022).10.3390/app12157530 ↗
92. Barton, I. E. Comparison of SIMPLE- and PISO-type algorithms for transient flows. Int. J. Numer. Methods Fluids 26, 459–483 (1998).10.1002/(SICI)1097-0363(19980228)26:4<459::AID-FLD645>3.0.CO;2-U ↗
93. Chen, D. X. & Chen, D. X. Extrusion Bioprinting of Scaffolds (Springer, 2019).10.1007/978-3-030-03460-3_6 ↗
94. Prendergast, M. E. & Burdick, J. A. Computational modeling and experimental characterization of extrusion printing into suspension baths. Adv. Healthc. Mater. 11, 2101679 (2022). A foundational study demonstrating computational simulations of embedded bioprinting processes.10.1002/adhm.202101679 ↗
95. Narei, H. et al. Numerical simulation of a core–shell polymer strand in material extrusion additive manufacturing. Polymers 13, 476 (2021).10.3390/polym13030476 ↗
96. Ahmad, A. et al. Coaxial bioprinting of a stentable and endothelialized human coronary artery-sized in vitro model. J. Mater. Chem. B https://doi.org/10.1039/d4tb00601a (2024).10.1039/d4tb00601a ↗
97. Shin, S. et al. Gelation of uniform interfacial diffusant in embedded 3D printing. Adv. Funct. Mater. 33, 2307435 (2023).10.1002/adfm.202307435 ↗
98. Friedrich, L. M. & Seppala, J. E. Simulated filament shapes in embedded 3D printing. Soft Matter 17, 8027–8046 (2021).10.1039/D1SM00731A ↗
99. McCormack, A., Highley, C. B., Leslie, N. R. & Melchels, F. P. 3D printing in suspension baths: keeping the promises of bioprinting afloat. Trends Biotechnol. 38, 584–593 (2020).10.1016/j.tibtech.2019.12.020 ↗
100. Mirdamadi, E., Muselimyan, N., Koti, P., Asfour, H. & Sarvazyan, N. Agarose slurry as a support medium for bioprinting and culturing freestanding cell-laden hydrogel constructs. 3D Print. Addit. Manuf. 6, 158–164 (2019).10.1089/3dp.2018.0175 ↗