journal article·2025-01-28

Clinical translation of personalized bioengineered implant scaffolds

Chun Xu, Sašo Ivanovski

Nature Reviews Bioengineering· Volume 3· Issue 5
Publisher page

Abstract

Organ and tissue damage, particularly of the musculoskeletal system, is commonly encountered in the clinic and can impact patient quality of life. Reconstructive operations can be necessary to restore form and function to damaged tissues; however, available off-the-shelf products fail to meet the needs of individual patients. Personalized regenerative treatments to restore damaged tissues could potentially bring benefits to both clinicians and patients. For example, resorbable implant scaffolds can be bioengineered and customized using technologies such as 3D printing to address the specific needs of patients while offering improved clinical outcomes along with reduced surgical time and complexity. For this purpose, appropriate medical-grade materials, advanced multiscale fabrication techniques and regulatory compliance are required. In this Review, we summarize the key considerations for developing personalized bioengineered implant scaffolds, emphasizing good manufacturing practice and clinical translatability. We discuss the status of clinical translation for personalized bioengineered implants and the lessons learned from existing phase I clinical trials using craniofacial reconstruction as a model system. Additionally, we provide a framework to inform wider clinical translation with recommendations on rational biomaterial choice and design, biofabrication strategies, biofunctionalization, standardized workflow, compliance with regulatory requirements, and evaluation of benefits. Finally, we discuss the remaining challenges and provide an outlook for the translation of personalized bioengineered implant scaffolds into routine clinical practice.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · Tissue Engineering and Regenerative Medicine

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Woolf, A. D., Erwin, J. & March, L. The need to address the burden of musculoskeletal conditions. Best Pract. Res. Clin. Rheumatol. 26, 183–224 (2012).10.1016/j.berh.2012.03.005 ↗
2. Atala, A., Kasper, F. K. & Mikos, A. G. Engineering complex tissues. Sci. Transl. Med. 4, 160rv112 (2012).10.1126/scitranslmed.3004890 ↗
3. Migliorini, F. et al. Strategies for large bone defect reconstruction after trauma, infections or tumour excision: a comprehensive review of the literature. Eur. J. Med. Res. 26, 118 (2021).10.1186/s40001-021-00593-9 ↗
4. Khademhosseini, A. & Langer, R. A decade of progress in tissue engineering. Nat. Protoc. 11, 1775–1781 (2016).10.1038/nprot.2016.123 ↗
5. Griffith, L. G. & Naughton, G. Tissue engineering-current challenges and expanding opportunities. Science 295, 1009–1014 (2002).10.1126/science.1069210 ↗
6. Rodrigo-Navarro, A., Sankaran, S., Dalby, M. J., del Campo, A. & Salmeron-Sanchez, M. Engineered living biomaterials. Nat. Rev. Mater. 6, 1175–1190 (2021).10.1038/s41578-021-00350-8 ↗
7. Brassard, J. A., Nikolaev, M., Hübscher, T., Hofer, M. & Lutolf, M. P. Recapitulating macro-scale tissue self-organization through organoid bioprinting. Nat. Mater. 20, 22–29 (2021).10.1038/s41563-020-00803-5 ↗
8. Obregon, F., Vaquette, C., Ivanovski, S., Hutmacher, D. W. & Bertassoni, L. E. Three-dimensional bioprinting for regenerative dentistry and craniofacial tissue engineering. J. Dent. Res. 94, 143S–152S (2015).10.1177/0022034515588885 ↗
9. Costa, P. F. et al. Advanced tissue engineering scaffold design for regeneration of the complex hierarchical periodontal structure. J. Clin. Periodontol. 41, 283–294 (2014).10.1111/jcpe.12214 ↗
10. Wong, K. C. 3D-printed patient-specific applications in orthopedics. Orthop. Res. Rev. 8, 57–66 (2016).
11. Tack, P., Victor, J., Gemmel, P. & Annemans, L. 3D-printing techniques in a medical setting: a systematic literature review. BioMed. Eng. Online 15, 115 (2016).10.1186/s12938-016-0236-4 ↗
12. Shahrubudin, N., Lee, T. C. & Ramlan, R. An overview on 3D printing technology: technological, materials, and applications. Procedia Manuf. 35, 1286–1296 (2019).10.1016/j.promfg.2019.06.089 ↗
13. Dawood, A., Marti, B. M., Sauret-Jackson, V. & Darwood, A. 3D printing in dentistry. Br. Dent. J. 219, 521–529 (2015).10.1038/sj.bdj.2015.914 ↗
14. Kodama, H. Automatic method for fabricating a three-dimensional plastic model with photo-hardening polymer. Rev. Sci. Instrum. 52, 1770–1773 (1981).10.1063/1.1136492 ↗
15. Hull, C. W. Apparatus for production of three-dimensional objects by stereolithography. US Patent 638905 (1984).
16. Murphy, S. V. & Atala, A. 3D bioprinting of tissues and organs. Nat. Biotechnol. 32, 773–785 (2014).10.1038/nbt.2958 ↗
17. Cubo, N., Garcia, M., Del Cañizo, J. F., Velasco, D. & Jorcano, J. L. 3D bioprinting of functional human skin: production and in vivo analysis. Biofabrication 9, 015006 (2016).10.1088/1758-5090/9/1/015006 ↗
18. D’Urso, P. S. et al. Custom cranioplasty using stereolithography and acrylic. Br. J. Plast. Surg. 53, 200–204 (2000).10.1054/bjps.1999.3268 ↗
19. Saijo, H. et al. Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology. J. Artif. Organs 12, 200–205 (2009).10.1007/s10047-009-0462-7 ↗
20. Kanno, Y. et al. Computed tomographic evaluation of novel custom-made artificial bones, “CT-bone”, applied for maxillofacial reconstruction. Regen. Ther. 5, 1–8 (2016).10.1016/j.reth.2016.05.002 ↗
21. Tan, G. et al. 3D printing in ophthalmology: from medical implants to personalised medicine. Int. J. Pharm. 625, 122094 (2022).10.1016/j.ijpharm.2022.122094 ↗
22. Bliley, J. M., Shiwarski, D. J. & Feinberg, A. W. 3D-bioprinted human tissue and the path toward clinical translation. Sci. Transl. Med. 14, eabo7047 (2022).10.1126/scitranslmed.abo7047 ↗
23. Hoffman, T., Khademhosseini, A. & Langer, R. Chasing the paradigm: clinical translation of 25 years of tissue engineering. Tissue Eng. Part A 25, 679–687 (2019).10.1089/ten.tea.2019.0032 ↗
24. Hollister, S. J. et al. Design control for clinical translation of 3D printed modular scaffolds. Ann. Biomed. Eng. 43, 774–786 (2015).10.1007/s10439-015-1270-2 ↗
25. Hollister, S. J. et al. Integrating image-based design and 3D biomaterial printing to create patient specific devices within a design control framework for clinical translation. ACS Biomater. Sci. Eng. 2, 1827–1836 (2016).10.1021/acsbiomaterials.6b00332 ↗
26. Youssef, A., Hollister, S. J. & Dalton, P. D. Additive manufacturing of polymer melts for implantable medical devices and scaffolds. Biofabrication 9, 012002 (2017).10.1088/1758-5090/aa5766 ↗
27. Morrison, R. J. et al. Regulatory considerations in the design and manufacturing of implantable 3D-printed medical devices. Clin. Transl. Sci. 8, 594–600 (2015).10.1111/cts.12315 ↗
28. Govindaraj, S. & Muthuraman, M. S. Systematic review on sterilization methods of implants and medical devices. Int. J. ChemTech. Res. 8, 897–911 (2015).
29. Harrington, R. E., Guda, T., Lambert, B. & Martin, J. in Biomaterials Science 4th edn (eds Wagner, W. R. et al.) 1431–1446 (Academic Press, 2020).10.1016/B978-0-12-816137-1.00091-X ↗
30. Link, T. Guidelines in practice: sterilization packaging systems. AORN J. 112, 248–260 (2020).10.1002/aorn.13150 ↗
31. Castrisos, G. et al. Regenerative matching axial vascularisation of absorbable 3D-printed scaffold for large bone defects: a first in human series. J. Plast. Reconstr. Aesthet. Surg. 75, 2108–2118 (2022).10.1016/j.bjps.2022.02.057 ↗
32. Scantlebury, T. V. 1982-1992: a decade of technology development for guided tissue regeneration. J. Periodontol. 64, 1129–1137 (1993).10.1902/jop.1993.64.11s.1129 ↗
33. Gottlow, J., Nyman, S., Lindhe, J., Karring, T. & Wennström, J. New attachment formation in the human periodontium by guided tissue regeneration Case reports. J. Clin. Periodontol. 13, 604–616 (1986).10.1111/j.1600-051X.1986.tb00854.x ↗
34. Laubach, M. et al. The concept of scaffold-guided bone regeneration for the treatment of long bone defects: current clinical application and future perspective. J. Funct. Biomater. 14, 341 (2023).10.3390/jfb14070341 ↗
35. Aguado, B. A., Grim, J. C., Rosales, A. M., Watson-Capps, J. J. & Anseth, K. S. Engineering precision biomaterials for personalized medicine. Sci. Transl. Med. 10, eaam8645 (2018).10.1126/scitranslmed.aam8645 ↗
36. Butler, D. Translational research: crossing the valley of death. Nature 453, 840–842 (2008).10.1038/453840a ↗
37. Riester, O., Borgolte, M., Csuk, R. & Deigner, H. P. Challenges in bone tissue regeneration: stem cell therapy, biofunctionality and antimicrobial properties of novel materials and its evolution. Int. J. Mol. Sci. 22, 192 (2020).10.3390/ijms22010192 ↗
38. Sadtler, K. et al. Design, clinical translation and immunological response of biomaterials in regenerative medicine. Nat. Rev. Mater. 1, 16040 (2016).10.1038/natrevmats.2016.40 ↗
39. Koons, G. L., Diba, M. & Mikos, A. G. Materials design for bone-tissue engineering. Nat. Rev. Mater. 5, 584–603 (2020).10.1038/s41578-020-0204-2 ↗
40. Williams, D. F. On the mechanisms of biocompatibility. Biomaterials 29, 2941–2953 (2008).10.1016/j.biomaterials.2008.04.023 ↗
41. Bartnikowski, M., Dargaville, T. R., Ivanovski, S. & Hutmacher, D. W. Degradation mechanisms of polycaprolactone in the context of chemistry, geometry and environment. Prog. Polym. Sci. 96, 1–20 (2019).10.1016/j.progpolymsci.2019.05.004 ↗
42. Zhang, F. & King, M. W. Biodegradable polymers as the pivotal player in the design of tissue engineering scaffolds. Adv. Healthc. Mater. 9, 1901358 (2020).10.1002/adhm.201901358 ↗
43. Song, R. et al. Current development of biodegradable polymeric materials for biomedical applications. Drug Design Devel. Ther. 12, 3117–3145 (2018).10.2147/DDDT.S165440 ↗
44. Seliktar, D. Designing cell-compatible hydrogels for biomedical applications. Science 336, 1124–1128 (2012).10.1126/science.1214804 ↗
45. Yue, K. et al. Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels. Biomaterials 73, 254–271 (2015).10.1016/j.biomaterials.2015.08.045 ↗
46. Lv, B. et al. Recent advances in GelMA hydrogel transplantation for musculoskeletal disorders and related disease treatment. Theranostics 13, 2015–2039 (2023).10.7150/thno.80615 ↗
47. Davison-Kotler, E., Marshall, W. S. & García-Gareta, E. Sources of collagen for biomaterials in skin wound healing. Bioengineering 6, 56 (2019).10.3390/bioengineering6030056 ↗
48. Parmaksiz, M., Dogan, A., Odabas, S., Elçin, A. E. & Elçin, Y. M. Clinical applications of decellularized extracellular matrices for tissue engineering and regenerative medicine. Biomed. Mater. 11, 022003 (2016).10.1088/1748-6041/11/2/022003 ↗
49. Hussey, G. S., Dziki, J. L. & Badylak, S. F. Extracellular matrix-based materials for regenerative medicine. Nat. Rev. Mater. 3, 159–173 (2018).10.1038/s41578-018-0023-x ↗
50. Crapo, P. M., Gilbert, T. W. & Badylak, S. F. An overview of tissue and whole organ decellularization processes. Biomaterials 32, 3233–3243 (2011).10.1016/j.biomaterials.2011.01.057 ↗
51. Zitzmann, N. U., Naef, R. & Schärer, P. Resorbable versus nonresorbable membranes in combination with Bio-Oss for guided bone regeneration. Int. J. Oral. Maxillofac. Implant. 12, 844–852 (1997).
52. Sculean, A. et al. Healing of intra‐bony defects following treatment with a composite bovine‐derived xenograft (Bio‐Oss Collagen) in combination with a collagen membrane (Bio‐Gide PERIO). J. Clin. Periodontol. 32, 720–724 (2005).10.1111/j.1600-051X.2005.00758.x ↗
53. Camelo, M. et al. Clinical, radiographic, and histologic evaluation of human periodontal defects treated with Bio-Oss and Blo-Gide. Int. J. Periodontics Restorative Dent. 18, 321–331 (1998).
54. Tawil, G. & Mawla, M. Sinus floor elevation using a bovine bone mineral (Bio-Oss) with or without the concomitant use of a bilayered collagen barrier (Bio-Gide): a clinical report of immediate and delayed implant placement. Int. J. Oral Maxillofac. Implants 16, 713–721 (2001).
55. Zhang, M. et al. 3D bioprinting of corneal decellularized extracellular matrix: GelMA composite hydrogel for corneal stroma engineering. Int. J. Bioprint. 9, 774 (2023).10.18063/ijb.774 ↗
56. Teo, A. J. T. et al. Polymeric biomaterials for medical implants and devices. ACS Biomater. Sci. Eng. 2, 454–472 (2016).10.1021/acsbiomaterials.5b00429 ↗
57. Hamlet, S. M., Vaquette, C., Shah, A., Hutmacher, D. W. & Ivanovski, S. 3-Dimensional functionalized polycaprolactone-hyaluronic acid hydrogel constructs for bone tissue engineering. J. Clin. Periodontol. 44, 428–437 (2017).10.1111/jcpe.12686 ↗
58. Ershad-Langroudi, A., Babazadeh, N., Alizadegan, F., Mehdi Mousaei, S. & Moradi, G. Polymers for implantable devices. J. Ind. Eng. Chem. 137, 61–86 (2024).10.1016/j.jiec.2024.03.030 ↗
59. Bohner, M., Santoni, B. L. G. & Döbelin, N. β-Tricalcium phosphate for bone substitution: synthesis and properties. Acta Biomater. 113, 23–41 (2020).10.1016/j.actbio.2020.06.022 ↗
60. Lei, C. et al. Hierarchical dual-porous hydroxyapatite doped dendritic mesoporous silica nanoparticles based scaffolds promote osteogenesis in vitro and in vivo. Nano Res. 14, 770–777 (2021).10.1007/s12274-020-3112-2 ↗
61. Ducheyne, P. & Qiu, Q. Bioactive ceramics: the effect of surface reactivity on bone formation and bone cell function. Biomaterials 20, 2287–2303 (1999).10.1016/S0142-9612(99)00181-7 ↗
62. Lin, K., Sheikh, R., Romanazzo, S. & Roohani, I. 3D printing of bioceramic scaffolds-barriers to the clinical translation: from promise to reality, and future perspectives. Materials 12, 2660 (2019).10.3390/ma12172660 ↗
63. Kaur, M. & Singh, K. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications. Mater. Sci. Eng. C 102, 844–862 (2019).10.1016/j.msec.2019.04.064 ↗
64. Popov, V. V. et al. Design and 3D-printing of titanium bone implants: brief review of approach and clinical cases. Biomed. Eng. Lett. 8, 337–344 (2018).10.1007/s13534-018-0080-5 ↗
65. Witte, F. The history of biodegradable magnesium implants: a review. Acta Biomater. 6, 1680–1692 (2010).10.1016/j.actbio.2010.02.028 ↗
66. Blaskovic, M. et al. Guided bone regeneration using a novel magnesium membrane: a literature review and a report of two cases in humans. J. Funct. Biomater. 14, 307 (2023).10.3390/jfb14060307 ↗
67. Huang, S. et al. High-purity weight-bearing magnesium screw: translational application in the healing of femoral neck fracture. Biomaterials 238, 119829 (2020).10.1016/j.biomaterials.2020.119829 ↗
68. Chen, Y., Xu, Z., Smith, C. & Sankar, J. Recent advances on the development of magnesium alloys for biodegradable implants. Acta Biomater. 10, 4561–4573 (2014).10.1016/j.actbio.2014.07.005 ↗
69. Han, H.-S. et al. Current status and outlook on the clinical translation of biodegradable metals. Mater. Today 23, 57–71 (2019).10.1016/j.mattod.2018.05.018 ↗
70. Zberg, B., Uggowitzer, P. J. & Löffler, J. F. MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants. Nat. Mater. 8, 887–891 (2009).10.1038/nmat2542 ↗
71. Zhao, D. et al. Current status on clinical applications of magnesium-based orthopaedic implants: a review from clinical translational perspective. Biomaterials 112, 287–302 (2017).10.1016/j.biomaterials.2016.10.017 ↗
72. Gorejová, R., Haverová, L., Oriňaková, R., Oriňak, A. & Oriňak, M. Recent advancements in Fe-based biodegradable materials for bone repair. J. Mater. Sci. 54, 1913–1947 (2019).10.1007/s10853-018-3011-z ↗
73. Gąsior, G., Szczepański, J. & Radtke, A. Biodegradable iron-based materials — what was done and what more can be done? Materials 14, 3381 (2021).10.3390/ma14123381 ↗
74. Yang, H. et al. Alloying design of biodegradable zinc as promising bone implants for load-bearing applications. Nat. Commun. 11, 401 (2020).10.1038/s41467-019-14153-7 ↗
75. Kabir, H., Munir, K., Wen, C. & Li, Y. Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: biomechanical and biocorrosion perspectives. Bioact. Mater. 6, 836–879 (2021).
76. Carluccio, D. et al. Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications. Acta Biomater. 103, 346–360 (2020).10.1016/j.actbio.2019.12.018 ↗
77. DebRoy, T. et al. Scientific, technological and economic issues in metal printing and their solutions. Nat. Mater. 18, 1026–1032 (2019).10.1038/s41563-019-0408-2 ↗
78. Alizadeh-Osgouei, M., Li, Y. & Wen, C. A comprehensive review of biodegradable synthetic polymer-ceramic composites and their manufacture for biomedical applications. Bioact. Mater. 4, 22–36 (2019).
79. Ramakrishna, S., Mayer, J., Wintermantel, E. & Leong, K. W. Biomedical applications of polymer-composite materials: a review. Compos. Sci. Technol. 61, 1189–1224 (2001).10.1016/S0266-3538(00)00241-4 ↗
80. Sun, J. L. et al. Intrafibrillar silicified collagen scaffold modulates monocyte to promote cell homing, angiogenesis and bone regeneration. Biomaterials 113, 203–216 (2017).10.1016/j.biomaterials.2016.10.050 ↗
81. Serra, T., Ortiz-Hernandez, M., Engel, E., Planell, J. A. & Navarro, M. Relevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds. Mater. Sci. Eng. C 38, 55–62 (2014).10.1016/j.msec.2014.01.003 ↗
82. Toh, H. W. et al. Polymer blends and polymer composites for cardiovascular implants. Eur. Polym. J. 146, 110249 (2021).10.1016/j.eurpolymj.2020.110249 ↗
83. Singh, B., Kumar, R. & Chohan, J. S. Polymer matrix composites in 3D printing: a state of art review. Mater. Today Proc. 33, 1562–1567 (2020).10.1016/j.matpr.2020.04.335 ↗
84. Dan, H. et al. The influence of cellular source on periodontal regeneration using calcium phosphate coated polycaprolactone scaffold supported cell sheets. Biomaterials 35, 113–122 (2014).10.1016/j.biomaterials.2013.09.074 ↗
85. Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q. & Hui, D. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos. B Eng. 143, 172–196 (2018).10.1016/j.compositesb.2018.02.012 ↗
86. Murphy, S. V., De Coppi, P. & Atala, A. Opportunities and challenges of translational 3D bioprinting. Nat. Biomed. Eng. 4, 370–380 (2020).10.1038/s41551-019-0471-7 ↗
87. Bouakaz, I., Drouet, C., Grossin, D., Cobraiville, E. & Nolens, G. Hydroxyapatite 3D-printed scaffolds with Gyroid-Triply periodic minimal surface (TPMS) porous structure: fabrication and an in vivo pilot study in sheep. Acta Biomater. 170, 580–595 (2023).10.1016/j.actbio.2023.08.041 ↗
88. Pugliese, R. & Graziosi, S. Biomimetic scaffolds using triply periodic minimal surface-based porous structures for biomedical applications. SLAS Technol. 28, 165–182 (2023).10.1016/j.slast.2023.04.004 ↗
89. Carotenuto, F. et al. From soft to hard biomimetic materials: tuning micro/nano-architecture of scaffolds for tissue regeneration. Micromachines 13, 780 (2022).10.3390/mi13050780 ↗
90. Moroni, L. et al. Biofabrication strategies for 3D in vitro models and regenerative medicine. Nat. Rev. Mater. 3, 21–37 (2018).10.1038/s41578-018-0006-y ↗
91. Zhang, Y. S. et al. 3D extrusion bioprinting. Nat. Rev. Meth. Primers 1, 75 (2021).10.1038/s43586-021-00073-8 ↗
92. Dekker, T. J., Steele, J. R., Federer, A. E., Hamid, K. S. & Adams, S. B. Use of patient-specific 3D-printed titanium implants for complex foot and ankle limb salvage, deformity correction, and arthrodesis procedures. Foot Ankle Inter. 39, 916–921 (2018).10.1177/1071100718770133 ↗
93. Fan, H. et al. Implantation of customized 3-D printed titanium prosthesis in limb salvage surgery: a case series and review of the literature. World J. Surg. Onco. 13, 308 (2015).10.1186/s12957-015-0723-2 ↗
94. Vaquette, C., Mitchell, J., Fernandez-Medina, T., Kumar, S. & Ivanovski, S. Resorbable additively manufactured scaffold imparts dimensional stability to extraskeletally regenerated bone. Biomaterials 269, 120671 (2021).10.1016/j.biomaterials.2021.120671 ↗
95. Koo, H. T., Oh, J. & Heo, C. Y. Cranioplasty using three-dimensional-printed polycaprolactone implant and free latissimus dorsi musculocutaneous flap in a patient with repeated wound problem following titanium cranioplasty. Arch. Plast. Surg. 49, 740–744 (2022).10.1055/s-0042-1748656 ↗
96. David, S. et al. Convergence of scaffold-guided bone regeneration principles and microvascular tissue transfer surgery. Sci. Adv. 9, eadd6071 (2023).10.1126/sciadv.add6071 ↗
97. Chiapasco, M., Casentini, P., Tommasato, G., Dellavia, C. & Del Fabbro, M. Customized CAD/CAM titanium meshes for the guided bone regeneration of severe alveolar ridge defects: preliminary results of a retrospective clinical study in humans. Clin. Oral. Implant. Res. 32, 498–510 (2021).10.1111/clr.13720 ↗
98. Derakhshanfar, S. et al. 3D bioprinting for biomedical devices and tissue engineering: a review of recent trends and advances. Bioact. Mater. 3, 144–156 (2018).
99. Tan, B., Gan, S., Wang, X., Liu, W. & Li, X. Applications of 3D bioprinting in tissue engineering: advantages, deficiencies, improvements, and future perspectives. J. Mater. Chem. B 9, 5385–5413 (2021).10.1039/D1TB00172H ↗
100. Vijayavenkataraman, S. 3D bioprinting: challenges in commercialization and clinical translation. J. 3D Print. Med. 7, 3DP8 (2023).10.2217/3dp-2022-0026 ↗