journal article·2024-03

Process planning and contour-based error compensation for precision grinding of miniature scalpels

Cheng Fan, Cao-Yang Xue, Jun Zhao, Wei Jiang, Wen-Ge Han, Lei Zhang, Li-Ning Sun

Advances in Manufacturing· Volume 12· Issue 1
Publisher page

Abstract

Miniature scalpels are mainly used in microsurgeries such as ophthalmic and cardiovascular surgeries. The size of a miniature scalpel is only a few millimeters, and the precision of the blade shape is high, which makes production of miniature scalpels extremely difficult. This study proposes a new sharpening process for grinding miniature scalpels on a four-axis machine tool. A post-processing algorithm for a four-axis grinding machine based on a kinematics model is established. We then propose a corresponding parameter calibration method for the parameters used in the kinematics model. Because of possible errors in the parameter calibration, a contour-based error compensation method is proposed for accurate adjustments to the edge shape following grinding. This can solve the problem of large deviations between the actual edge shape after grinding and the ideal edge shape. The effectiveness of the proposed process planning and error compensation method is verified experimentally, and the grinding process parameters of the miniature scalpel are optimized to improve its surface processing quality. The sharpness of the optimized miniature scalpel is less than 0.75 N, and the blade shape is symmetrical, which meets the technical requirements of miniature scalpels.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Measurement and Metrology Techniques · Advanced Surface Polishing Techniques · Advanced Numerical Analysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Dundar R, Iynen I, Buyruk A (2021) Different approach for surgery of stapes: comparison microscopic and endoscopic approach. Am J Otolaryngol 43(4):103242. https://doi.org/10.1016/j.amjoto.2021.10324210.1016/j.amjoto.2021.103242 ↗
2. Marsh DJ, Fox A, Grobbelaar AO et al (2015) Abdominoplasty and seroma: a prospective randomised study comparing scalpel and handheld electrocautery dissection. J Plast Reconstr Aesthet Surg 68(2):192–19610.1016/j.bjps.2014.10.004 ↗
3. Milling R, Carolan D, Pafitanis G et al (2022) Microtools: a systematic review of validated assessment tools in microsurgery. J Plast Reconstruct Aesthet Surg 75(11):4013–402210.1016/j.bjps.2022.06.092 ↗
4. Sabin LE (2010) From fingers to miniaturization and robots: an overview of the history of surgical instrumentation. Perioper Nurs Clin 5(1):1–1310.1016/j.cpen.2009.11.005 ↗
5. Fan C, Liu K, Wang Y et al (2023) Nano-indentation and nano-scratch of flexible intraocular lens material at the molecular scale. Acta Mech Sin 39(1):122331. https://doi.org/10.1007/s10409-022-22321-x10.1007/s10409-022-22321-x ↗
6. Fan C, Liu K, Chen Y et al (2022) A new modelling method of material removal profile for electrorheological polishing with a mini annular integrated electrode. J Mater Process Technol 305:117589. https://doi.org/10.1016/j.jmatprotec.2022.11758910.1016/j.jmatprotec.2022.117589 ↗
7. Lu J, Wang X, Huang Y et al (2020) Fabrication and cutting performance of bionic micro-serrated scalpels based on the miscanthus leaves. Tribol Int 145:106162. https://doi.org/10.1016/j.triboint.2020.10616210.1016/j.triboint.2020.106162 ↗
8. McCarthy CT, Hussey M, Gilchrist MD (2007) On the sharpness of straight edge blades in cutting soft solids: part I—indentation experiments. Eng Fract Mech 74(14):2205–222410.1016/j.engfracmech.2006.10.015 ↗
9. Stępień P (2010) Micro-geometrical characteristics of the cutting edge as the intersection of two rough surfaces. Wear 269(3/4):249–26110.1016/j.wear.2010.04.005 ↗
10. Reilly GA, McCormack BAO, Taylor D (2004) Cutting sharpness measurement: a critical review. J Mater Process Technol 153:261–26710.1016/j.jmatprotec.2004.04.297 ↗
11. Belkin PN, Kusmanov SA, Parfenov EV (2020) Mechanism and technological opportunity of plasma electrolytic polishing of metals and alloys surfaces. Appl Surf Sci Adv 1:100016. https://doi.org/10.1016/j.apsadv.2020.10001610.1016/j.apsadv.2020.100016 ↗
12. Prescher H, Ling MX, Bigdelle V et al (2021) Scalpel edge roughness affects post-transection peripheral nerve regeneration. Surg Open Sci 4:1–610.1016/j.sopen.2020.11.002 ↗
13. Schwenke H, Knapp W, Haitjema H et al (2008) Geometric error measurement and compensation of machines—an update. CIRP Ann 57(2):660–67510.1016/j.cirp.2008.09.008 ↗
14. Eastwood S, Webb P (2009) Compensation of thermal deformation of a hybrid parallel kinematic machine. Robot Comput Integr Manuf 25(1):81–9010.1016/j.rcim.2007.10.001 ↗
15. Luo G, Zou L, Wang Z et al (2021) A novel kinematic parameters calibration method for industrial robot based on Levenberg-Marquardt and differential evolution hybrid algorithm. Robot Comput Integr Manuf 71:102165. https://doi.org/10.1016/j.rcim.2021.10216510.1016/j.rcim.2021.102165 ↗
16. Xia C, Wang S, Ma C et al (2020) Crucial geometric error compensation toward gear grinding accuracy enhancement based on simplified actual inverse kinematic model. Int J Mech Sci 169:105319. https://doi.org/10.1016/j.ijmecsci.2019.10531910.1016/j.ijmecsci.2019.105319 ↗
17. Ramesh R, Mannan MA, Poo AN (2000) Error compensation in machine tools—a review: part I: geometric, cutting-force induced and fixture-dependent errors. Int J Mach Tools Manuf 40(9):1235–125610.1016/S0890-6955(00)00009-2 ↗
18. Zhu S, Ding G, Qin S et al (2012) Integrated geometric error modeling, identification and compensation of CNC machine tools. Int J Mach Tools Manuf 52(1):24–2910.1016/j.ijmachtools.2011.08.011 ↗
19. Xia H, Peng W, Ouyang X et al (2017) Identification of geometric errors of rotary axis on multi-axis machine tool based on kinematic analysis method using double ball bar. Int J Mach Tools Manuf 122:161–17510.1016/j.ijmachtools.2017.07.006 ↗
20. Ibaraki S, Iritani T, Matsushita T (2012) Calibration of location errors of rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe. Int J Mach Tools Manuf 58(1):44–5310.1016/j.ijmachtools.2012.03.002 ↗
21. Wan A, Song L, Xu J et al (2018) Calibration and compensation of machine tool volumetric error using a laser tracker. Int J Mach Tools Manuf 124:126–13310.1016/j.ijmachtools.2017.10.004 ↗
22. Wei X, Miao E, Wang W et al (2019) Real-time thermal deformation compensation method for active phased array antenna panels. Precis Eng 60:121–12910.1016/j.precisioneng.2019.08.003 ↗
23. Zhang T, Ye W, Shan Y (2016) Application of sliced inverse regression with fuzzy clustering for thermal error modeling of CNC machine tool. Int J Adv Manuf Technol 85(9):2761–277110.1007/s00170-015-8135-6 ↗
24. Fu G, Tao C, Xie Y et al (2021) Temperature-sensitive point selection for thermal error modeling of machine tool spindle by considering heat source regions. Int J Adv Manuf Technol 112(9):2447–246010.1007/s00170-020-06417-0 ↗
25. Wei X, Feng X, Miao E et al (2022) Sub-regional thermal error compensation modeling for CNC machine tool worktables. Precis Eng 73:313–32510.1016/j.precisioneng.2021.10.007 ↗