One-step fabrication of double-sided gradient-structured sheets by plastic flow machining with arrayed arc-sawteeth
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Nanofabrication and Lithography Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Valiev R (2004) Nanostructuring of metals by severe plastic deformation for advanced properties. Nat Mater 3:511–516. https://doi.org/10.1038/nmat118010.1038/nmat1180 ↗
2. Bagherpour E, Pardis N, Reihanian M et al (2019) An overview on severe plastic deformation: research status, techniques classification, microstructure evolution, and applications. Int J Adv Manuf Technol 100:1647–1694. https://doi.org/10.1007/s00170-018-2652-z10.1007/s00170-018-2652-z ↗
3. Verleysen P, Lanjewar H (2020) Dynamic high pressure torsion: a novel technique for dynamic severe plastic deformation. J Mater Process Technol 276:116393. https://doi.org/10.1016/j.jmatprotec.2019.11639310.1016/j.jmatprotec.2019.116393 ↗
4. Lee JC, Seok HK, Suh JY (2002) Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing. Acta Mater 50:4005–4019. https://doi.org/10.1016/S1359-6454(02)00200-810.1016/S1359-6454(02)00200-8 ↗
5. Salimyanfard F, Toroghinejad MR, Ashrafizadeh F et al (2011) EBSD analysis of nano-structured copper processed by ECAP. Mater Sci Eng A 528:5348–5355. https://doi.org/10.1016/j.msea.2011.03.07510.1016/j.msea.2011.03.075 ↗
6. Tayyebi M, Eghbali B (2013) Study on the microstructure and mechanical properties of multilayer Cu/Ni composite processed by accumulative roll bonding. Mater Sci Eng A 559:759–764. https://doi.org/10.1016/j.msea.2012.09.02110.1016/j.msea.2012.09.021 ↗
7. Zhan M, Li Y, Chen W et al (2007) Microstructure and mechanical properties of Mg-Al-Zn alloy sheets severely deformed by accumulative roll-bonding. J Mater Sci 42:9256–9261. https://doi.org/10.1007/s10853-007-1885-210.1007/s10853-007-1885-2 ↗
8. Zhilyaev AP, Langdon TG (2008) Using high-pressure torsion for metal processing: fundamentals and applications. Prog Mater Sci 53:893–979. https://doi.org/10.1016/j.pmatsci.2008.03.00210.1016/j.pmatsci.2008.03.002 ↗
9. Heczel A, Kawasaki M, Lábár JL et al (2017) Defect structure and hardness in nanocrystalline CoCrFeMnNi high-entropy alloy processed by high-pressure torsion. J Alloy Compd 711:143–154. https://doi.org/10.1016/j.jallcom.2017.03.35210.1016/j.jallcom.2017.03.352 ↗
10. Moscoso W, Shankar MR, Mann J et al (2007) Bulk nanostructured materials by large strain extrusion machining. J Mater Res 22:201–205. https://doi.org/10.1557/jmr.2007.002110.1557/jmr.2007.0021 ↗
11. Deng W, Li Q, Li B et al (2014) Thermal stability of ultrafine grained aluminium alloy prepared by large strain extrusion machining. Mater Sci Technol 30:850–859. https://doi.org/10.1179/1743284713Y.000000042110.1179/1743284713Y.0000000421 ↗
12. Kumar K, van Swygenhoven H, Suresh S (2003) Mechanical behavior of nanocrystalline metals and alloys. Acta Mater 51:5743–5774. https://doi.org/10.1016/j.actamat.2003.08.03210.1016/j.actamat.2003.08.032 ↗
13. McFadden S, Mukherjee A (2005) Sulfur and superplasticity in electrodeposited ultrafine-grained Ni. Mater Sci Eng A 395:265–268. https://doi.org/10.1016/j.msea.2004.12.02510.1016/j.msea.2004.12.025 ↗
14. Ma E (2003) Instabilities and ductility of nanocrystalline and ultrafine-grained metals. Scripta Mater 49:663–668. https://doi.org/10.1016/S1359-6462(03)00396-810.1016/S1359-6462(03)00396-8 ↗
15. Hall E (1951) The deformation and ageing of mild steel: III discussion of results. Proc Phys Soc London Sect B 64:747. https://doi.org/10.1088/0370-1301/64/9/30310.1088/0370-1301/64/9/303 ↗
16. Steinmetz DR, Jäpel T, Wietbrock B et al (2013) Revealing the strain-hardening behavior of twinning-induced plasticity steels: theory, simulations, experiments. Acta Mater 61:494–510. https://doi.org/10.1016/j.actamat.2012.09.06410.1016/j.actamat.2012.09.064 ↗
17. Saha R, Ueji R, Tsuji N (2013) Fully recrystallized nanostructure fabricated without severe plastic deformation in high-Mn austenitic steel. Scripta Mater 68:813–816. https://doi.org/10.1016/j.scriptamat.2013.01.03810.1016/j.scriptamat.2013.01.038 ↗
18. Li X, Lu L, Li J et al (2020) Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys. Nat Rev Mater 5:706–723. https://doi.org/10.1038/s41578-020-0212-210.1038/s41578-020-0212-2 ↗
19. Zhu Y, Wu X (2019) Perspective on hetero-deformation induced (HDI) hardening and back stress. Mater Res Lett 7:393–398. https://doi.org/10.1080/21663831.2019.161633110.1080/21663831.2019.1616331 ↗
20. Zhu Y, Ameyama K, Anderson PM et al (2021) Heterostructured materials: superior properties from hetero-zone interaction. Mater Res Lett 9(1):1–31. https://doi.org/10.1080/21663831.2020.179683610.1080/21663831.2020.1796836 ↗
21. Yang M, Pan Y, Yuan F et al (2016) Back stress strengthening and strain hardening in gradient structure. Mater Res Lett 4:145–151. https://doi.org/10.1080/21663831.2016.115300410.1080/21663831.2016.1153004 ↗
22. Hao X, Zhong P, Li S et al (2024) Process design of one-step deformation to fabricate double-sided gradient structures: principle, microstructure and mechanical properties. J Manuf Process 132:14–26. https://doi.org/10.1016/j.jmapro.2024.10.04810.1016/j.jmapro.2024.10.048 ↗
23. Yang J, Xu L, Gao H et al (2021) Effect of global constraint on the mechanical behavior of gradient materials. Mater Sci Eng A 826:141963. https://doi.org/10.1016/j.msea.2021.14196310.1016/j.msea.2021.141963 ↗
24. Zhu K, Vassel A, Brisset F et al (2004) Nanostructure formation mechanism of α-titanium using SMAT. Acta Mater 52:4101–4110. https://doi.org/10.1016/j.actamat.2004.05.02310.1016/j.actamat.2004.05.023 ↗
25. Li W, Tao NR, Lu K (2008) Fabrication of a gradient nano-micro-structured surface layer on bulk copper by means of a surface mechanical grinding treatment. Scripta Mater 59:546–549. https://doi.org/10.1016/j.scriptamat.2008.05.00310.1016/j.scriptamat.2008.05.003 ↗
26. Xu W, Liu X, Lu K (2018) Strain-induced microstructure refinement in pure Al below 100 nm in size. Acta Mater 152:138–147. https://doi.org/10.1016/j.actamat.2018.04.01410.1016/j.actamat.2018.04.014 ↗
27. Li J, Lu W, Gibson J et al (2018) Eliminating deformation incompatibility in composites by gradient nanolayer architectures. Sci Rep 8:16216. https://doi.org/10.1038/s41598-018-34369-910.1038/s41598-018-34369-9 ↗
28. Cheng Z, Zhou H, Lu Q et al (2018) Extra strengthening and work hardening in gradient nanotwinned metals. Science 362:eaau1925. https://doi.org/10.1126/science.aau192510.1126/science.aau1925 ↗
29. Deng H, He H, Huang Q et al (2024) Microstructure evolution of TC25G/Ti2AlNb structural gradient material fabricated by laser directed energy deposition. Mater Lett 364:136341. https://doi.org/10.1016/j.matlet.2024.13634110.1016/j.matlet.2024.136341 ↗
30. Vu VQ, Beygelzimer Y, Toth LS et al (2018) The plastic flow machining: a new SPD process for producing metal sheets with gradient structures. Mater Charact 138:208–214. https://doi.org/10.1016/j.matchar.2018.02.01310.1016/j.matchar.2018.02.013 ↗
31. Vu VQ, Beygelzimer Y, Kulagin R et al (2018) The new plastic flow machining process for producing thin sheets. Adv Mater Sci Eng. https://doi.org/10.1155/2018/874796010.1155/2018/8747960 ↗
32. Zeng Y, Zou Y, Zhang B et al (2022) The formation mechanism, mechanical properties and thermal stability of the pure copper sheet with gradient structure processed by plastic flow machining. Mater Charact 185:111745. https://doi.org/10.1016/j.matchar.2022.11174510.1016/j.matchar.2022.111745 ↗
33. Zhong P, Hao X, Li S et al (2025) Investigation of stagnation point and microstructure evolution in forming Al-Mg-Si alloy sheets with synergistic strength-ductility. J Alloy Compd 1010:177139. https://doi.org/10.1016/j.jallcom.2024.17713910.1016/j.jallcom.2024.177139 ↗
34. Varga M, Leroch S, Gross T et al (2021) Scratching aluminium alloys–modelling and experimental assessment of damage as function of the strain rate. Wear 476:203670. https://doi.org/10.1016/j.wear.2021.20367010.1016/j.wear.2021.203670 ↗
35. Ding H, Shen N, Shin YC (2011) Modeling of grain refinement in aluminum and copper subjected to cutting. Comput Mater Sci 50:3016–3025. https://doi.org/10.1016/j.commatsci.2011.05.02010.1016/j.commatsci.2011.05.020 ↗
36. Wu H, Ma J, Lei S (2018) FEM prediction of dislocation density and grain size evolution in high-speed machining of Al6061-T6 alloy using microgrooved cutting tools. Int J Adv Manuf Technol 95:4211–4227. https://doi.org/10.1007/s00170-017-1476-610.1007/s00170-017-1476-6 ↗
37. Baik SC, Estrin Y, Kim HS et al (2003) Dislocation density-based modeling of deformation behavior of aluminium under equal channel angular pressing. Mater Sci Eng A 351:86–97. https://doi.org/10.1016/S0921-5093(02)00847-X10.1016/S0921-5093(02)00847-X ↗
38. Hassani-Gangaraj SM, Cho K, Voigt HJ et al (2015) Experimental assessment and simulation of surface nanocrystallization by severe shot peening. Acta Mater 97:105–115. https://doi.org/10.1016/j.actamat.2015.06.05410.1016/j.actamat.2015.06.054 ↗
39. Atmani Z, Haddag B, Nouari M et al (2016) Combined microstructure-based flow stress and grain size evolution models for multi-physics modelling of metal machining. Int J Mech Sci 118:77–90. https://doi.org/10.1016/j.ijmecsci.2016.09.01610.1016/j.ijmecsci.2016.09.016 ↗
40. Enikeev NA, Kim HS, Alexandrov IV (2007) Kinetic dislocation model of microstructure evolution during severe plastic deformation. Mater Sci Eng A 460:619–623. https://doi.org/10.1016/j.msea.2007.02.00510.1016/j.msea.2007.02.005 ↗
41. Ding H, Shin YC (2014) Dislocation density-based grain refinement modeling of orthogonal cutting of titanium. J Manuf Sci Eng 136:041003. https://doi.org/10.1115/1.402720710.1115/1.4027207 ↗
42. Ding L, Zhang X, Liu RC (2014) Dislocation density and grain size evolution in the machining of Al6061-T6 alloys. J Manuf Sci Eng 136:041020. https://doi.org/10.1115/1.402767510.1115/1.4027675 ↗
43. Imbrogno S, Rinaldi S, Umbrello D et al (2018) A physically based constitutive model for predicting the surface integrity in machining of Waspaloy. Mater Des 152:140–155. https://doi.org/10.1016/j.matdes.2018.04.06910.1016/j.matdes.2018.04.069 ↗
44. Shen N, Ding H, Pu Z et al (2017) Enhanced surface integrity from cryogenic machining of AZ31B Mg alloy: a physics-based analysis with microstructure prediction. J Manuf Sci Eng 139:061012. https://doi.org/10.1115/1.403427910.1115/1.4034279 ↗
45. Ding H, Shin YC (2013) Multi-physics modeling and simulations of surface microstructure alteration in hard turning. J Mater Process Technol 213:877–886. https://doi.org/10.1016/j.jmatprotec.2012.12.01610.1016/j.jmatprotec.2012.12.016 ↗
46. Diniz AE, MachadoÁR, Corrêa JG (2016) Tool wear mechanisms in the machining of steels and stainless steels. Int J Adv Manuf Technol 87:3157–3168. https://doi.org/10.1007/s00170-016-8704-310.1007/s00170-016-8704-3 ↗
47. Poulachon G, Moisan A, Jawahir I (2001) Tool-wear mechanisms in hard turning with polycrystalline cubic boron nitride tools. Wear 250:576–586. https://doi.org/10.1016/S0043-1648(01)00609-310.1016/S0043-1648(01)00609-3 ↗
48. Khanna N, Agrawal C, Dogra M et al (2020) Evaluation of tool wear, energy consumption, and surface roughness during turning of Inconel 718 using sustainable machining technique. J Market Res 9:5794–5804. https://doi.org/10.1016/j.jmrt.2020.03.10410.1016/j.jmrt.2020.03.104 ↗
49. Altin A, Nalbant M, Taskesen A (2007) The effects of cutting speed on tool wear and tool life when machining Inconel 718 with ceramic tools. Mater Des 28:2518–2522. https://doi.org/10.1016/j.matdes.2006.09.00410.1016/j.matdes.2006.09.004 ↗
50. Shen P, Zhang B, Li Z et al (2023) Forming mechanism, mechanical properties, and corrosion properties of aluminum alloy sheet with gradient structure processed by plastic flow machining. J Alloy Compd 933:167800. https://doi.org/10.1016/j.jallcom.2022.16780010.1016/j.jallcom.2022.167800 ↗
51. Segal V (2003) Slip line solutions, deformation mode and loading history during equal channel angular extrusion. Mater Sci Eng A 345:36–46. https://doi.org/10.1016/S0921-5093(02)00258-710.1016/S0921-5093(02)00258-7 ↗
52. Yanushkevich Z, Belyakov A, Kaibyshev R (2015) Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773–1273 K. Acta Mater 82:244–254. https://doi.org/10.1016/j.actamat.2014.09.02310.1016/j.actamat.2014.09.023 ↗
53. Wang J, Duan Q, Huang C et al (2008) Tensile and compressive deformation behaviors of commercially pure Al processed by equal-channel angular pressing with different dies. Mater Sci Eng A 496:409–416. https://doi.org/10.1016/j.msea.2008.05.04110.1016/j.msea.2008.05.041 ↗
54. Lanjewar H, Naghdy S, Vercruysse F et al (2019) Severe plastically deformed commercially pure aluminum: substructure, micro-texture and associated mechanical response during uniaxial tension. Mater Sci Eng A 764:138195. https://doi.org/10.1016/j.msea.2019.13819510.1016/j.msea.2019.138195 ↗
55. Liu Y, Jin B, Lu J (2015) Mechanical properties and thermal stability of nanocrystallized pure aluminum produced by surface mechanical attrition treatment. Mater Sci Eng A 636:446–451. https://doi.org/10.1016/j.msea.2015.03.06810.1016/j.msea.2015.03.068 ↗
56. Li S, Qin N, Liu J et al (2016) Microstructure, texture and mechanical properties of AA1060 aluminum plate processed by snake rolling. Mater Des 90:1010–1017. https://doi.org/10.1016/j.matdes.2015.11.05410.1016/j.matdes.2015.11.054 ↗