journal article·2020-10-12

3D-printed multifunctional materials enabled by artificial-intelligence-assisted fabrication technologies

Zhijie Zhu, Daniel Wai Hou Ng, Hyun Soo Park, Michael C. McAlpine

Nature Reviews Materials· Volume 6· Issue 1
Publisher page

Abstract

The emerging capability to 3D print a diverse palette of functional inks will enable the mass democratization of patient-specific wearable devices and smart biomedical implants for applications such as health monitoring and regenerative biomedicines. These personalized wearables could be fabricated via ex situ printing, which involves first printing a design on a planar substrate and then deploying it to the target surface. However, this can result in a geometrically and dynamically mismatched interface between printed materials and target surfaces. In situ printing provides a potential remedy by directly printing 3D constructs on the target surfaces. This new manufacturing procedure requires the assistance of artificial intelligence (AI) to sense, adapt and predict the state of the printing environment, such as a dynamically morphing organ. In this Review, we discuss electronic and biological inks for in situ 3D printing, AI-empowered 3D-printing approaches with open-loop, closed-loop and predictive control, and recent developments in surgical robotics and AI that could be integrated in future 3D-printing approaches. We anticipate that this convergence of AI, 3D printing, functional materials and personalized biomedical devices will lead to a compelling future for smart manufacturing. Artificial intelligence can be used to facilitate the 3D printing of functional materials and devices directly on target surfaces, such as human bodies. This Review surveys ex situ and in situ artificial-intelligence-assisted 3D printing of multifunctional materials and its combination with surgical robots to enable autonomous medical care and smart biomanufacturing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies · Anatomy and Medical Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Valentine, A. D. et al. Hybrid 3D printing of soft electronics. Adv. Mater. 29, 1703817 (2017).10.1002/adma.201703817 ↗
2. Lu, B., Lan, H. & Liu, H. Additive manufacturing frontier: 3D printing electronics. Opto-Electron. Adv. 1, 170004 (2018).
3. Guo, S.-Z., Qiu, K., Meng, F., Park, S. H. & McAlpine, M. C. 3D printed stretchable tactile sensors. Adv. Mater. 29, 1701218 (2017).10.1002/adma.201701218 ↗
4. Kong, Y. L. et al. 3D printed quantum dot light-emitting diodes. Nano Lett. 14, 7017–7023 (2014).10.1021/nl5033292 ↗
5. Qiu, K. et al. 3D printed organ models with physical properties of tissue and integrated sensors. Adv. Mater. Technol. 3, 1700235 (2018).10.1002/admt.201700235 ↗
6. Joung, D. et al. 3D printed stem-cell derived neural progenitors generate spinal cord scaffolds. Adv. Funct. Mater. 28, 1801850 (2018).10.1002/adfm.201801850 ↗
7. Kupfer, M. E. et al. In situ expansion, differentiation and electromechanical coupling of human cardiac muscle in a 3D bioprinted, chambered organoid. Circ. Res. 127, 207–224 (2020).10.1161/CIRCRESAHA.119.316155 ↗
8. Mannoor, M. S. et al. 3D printed bionic ears. Nano Lett. 13, 2634–2639 (2013).10.1021/nl4007744 ↗
9. Grigoryan, B. et al. Multivascular networks and functional intravascular topologies within biocompatible hydrogels. Science 364, 458–464 (2019).10.1126/science.aav9750 ↗
10. Skylar-Scott, M. A. et al. Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels. Sci. Adv. 5, eaaw2459 (2019).10.1126/sciadv.aaw2459 ↗
11. Park, S. H. et al. 3D printed polymer photodetectors. Adv. Mater. 30, 1803980 (2018).10.1002/adma.201803980 ↗
12. Kong, Y. L., Gupta, M. K., Johnson, B. N. & McAlpine, M. C. 3D printed bionic nanodevices. Nano Today 11, 330–350 (2016).10.1016/j.nantod.2016.04.007 ↗
13. Zhang, Y. et al. Printing, folding and assembly methods for forming 3D mesostructures in advanced materials. Nat. Rev. Mater. 2, 17019 (2017).10.1038/natrevmats.2017.19 ↗
14. Murphy, S. V. & Atala, A. 3D bioprinting of tissues and organs. Nat. Biotechnol. 32, 773–785 (2014).10.1038/nbt.2958 ↗
15. Singh, S., Choudhury, D., Yu, F., Mironov, V. & Naing, M. W. In situ bioprinting – bioprinting from benchside to bedside? Acta Biomater. 101, 14–25 (2020).10.1016/j.actbio.2019.08.045 ↗
16. Zhu, Z. et al. 3D printed functional and biological materials on moving freeform surfaces. Adv. Mater. 30, 1707495 (2018).10.1002/adma.201707495 ↗
17. O’Neill, J. J., Johnson, R. A., Dockter, R. L. & Kowalewski, T. M. in Proc. IEEE/RSJ Int. Conf. Intell. Robots Syst. 934–940 (IEEE, 2017).
18. Razaviarab, N., Sharifi, S. & Banadaki, Y. M. Smart additive manufacturing empowered by a closed-loop machine learning algorithm. Proc. SPIE 10969, 109690H (2019).
19. DeCost, B. L., Jain, H., Rollett, A. D. & Holm, E. A. Computer vision and machine learning for autonomous characterization of AM powder feedstocks. JOM 69, 456–465 (2017).10.1007/s11837-016-2226-1 ↗
20. Sitthi-Amorn, P. et al. MultiFab: a machine vision assisted platform for multi-material 3D printing. ACM Trans. Graph. 34, 129 (2015).10.1145/2766962 ↗
21. Stoyanov, S. & Bailey, C. in 40th Int. Spring Semin. Electron. Technol. 1–6 (IEEE, 2017).
22. Chen, D., Skouras, M., Zhu, B. & Matusik, W. Computational discovery of extremal microstructure families. Sci. Adv. 4, eaao7005 (2018).10.1126/sciadv.aao7005 ↗
23. MacCurdy, R., Lipton, J., Li, S. & Rus, D. in Proc. IEEE/RSJ Int. Conf. Intell. Robots Syst. 2628–2635 (IEEE, 2016).
24. Langlois, T., Shamir, A., Dror, D., Matusik, W. & Levin, D. I. Stochastic structural analysis for context-aware design and fabrication. ACM Trans. Graph. 35, 226 (2016).
25. Dai, C. et al. Support-free volume printing by multi-axis motion. ACM Trans. Graph. 37, 134 (2018).10.1145/3197517.3201342 ↗
26. Yang, X., Sun, M., Bian, Y. & He, X. A room-temperature high-conductivity metal printing paradigm with visible-light projection lithography. Adv. Funct. Mater. 29, 1807615 (2019).10.1002/adfm.201807615 ↗
27. Huang, T. Q., Qu, X., Liu, J. & Chen, S. 3D printing of biomimetic microstructures for cancer cell migration. Biomed. Microdevices 16, 127–132 (2014).10.1007/s10544-013-9812-6 ↗
28. Wang, Z. et al. A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks. Biofabrication 7, 045009 (2015).10.1088/1758-5090/7/4/045009 ↗
29. Gauvin, R. et al. Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography. Biomaterials 33, 3824–3834 (2012).10.1016/j.biomaterials.2012.01.048 ↗
30. Stevens, A. G. et al. Conformal robotic stereolithography. 3D Print. Addit. Manuf. 3, 226–235 (2016).10.1089/3dp.2016.0042 ↗
31. Han, D., Yang, C., Fang, N. X. & Lee, H. Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control. Addit. Manuf. 27, 606–615 (2019).
32. Yun, H. & Kim, H. Development of DMD-based micro-stereolithography apparatus for biodegradable multi-material micro-needle fabrication. J. Mech. Sci. Technol. 27, 2973–2978 (2013).10.1007/s12206-013-0812-5 ↗
33. Skylar-Scott, M. A., Mueller, J., Visser, C. W. & Lewis, J. A. Voxelated soft matter via multimaterial multinozzle 3D printing. Nature 575, 330–335 (2019).10.1038/s41586-019-1736-8 ↗
34. Su, R., Park, S. H., Li, Z. & McAlpine,. M. C. in Robotic Systems and Autonomous Platforms (eds Walsh, S. M. & Strano, M. S.) 309–334 (Woodhead Publishing, 2018).10.1016/B978-0-08-102260-3.00013-5 ↗
35. Haghiashtiani, G., Habtour, E., Park, S.-H., Gardea, F. & McAlpine, M. C. 3D printed electrically-driven soft actuators. Extreme Mech. Lett. 21, 1–8 (2018).10.1016/j.eml.2018.02.002 ↗
36. Hwang, S. W. et al. High-performance biodegradable/transient electronics on biodegradable polymers. Adv. Mater. 26, 3905–3911 (2014).10.1002/adma.201306050 ↗
37. Kim, D.-H. et al. Epidermal electronics. Science 333, 838–843 (2011).10.1126/science.1206157 ↗
38. Zhou, N. et al. Perovskite nanowire–block copolymer composites with digitally programmable polarization anisotropy. Sci. Adv. 5, eaav8141 (2019).10.1126/sciadv.aav8141 ↗
39. Kim, D.-H. et al. Dissolvable films of silk fibroin for ultrathin conformal bio-integrated electronics. Nat. Mater. 9, 511–517 (2010).10.1038/nmat2745 ↗
40. Zare Bidoky, F., Hyun, W. J., Song, D. & Frisbie, C. D. Printed, 1 V electrolyte-gated transistors based on poly(3-hexylthiophene) operating at >10 kHz on plastic. Appl. Phys. Lett. 113, 053301 (2018).10.1063/1.5025475 ↗
41. Kim, H., Fernando, T., Li, M., Lin, Y. & Tseng, T.-L. B. Fabrication and characterization of 3D printed BaTiO3/PVDF nanocomposites. J. Compos. Mater. 52, 197–206 (2018).10.1177/0021998317704709 ↗
42. Kim, K. et al. 3D optical printing of piezoelectric nanoparticle–polymer composite materials. ACS Nano 8, 9799–9806 (2014).10.1021/nn503268f ↗
43. Ahn, B. Y. et al. Omnidirectional printing of flexible, stretchable, and spanning silver microelectrodes. Science 323, 1590–1593 (2009).10.1126/science.1168375 ↗
44. Nge, T. T., Nogi, M. & Suganuma, K. Electrical functionality of inkjet-printed silver nanoparticle conductive tracks on nanostructured paper compared with those on plastic substrates. J. Mater. Chem. C 1, 5235–5243 (2013).10.1039/c3tc31220h ↗
45. Kamyshny, A. & Magdassi, S. Conductive nanomaterials for 2D and 3D printed flexible electronics. Chem. Soc. Rev. 48, 1712–1740 (2019).10.1039/C8CS00738A ↗
46. Russo, A. et al. Pen-on-paper flexible electronics. Adv. Mater. 23, 3426–3430 (2011).10.1002/adma.201101328 ↗
47. Benn, T., Cavanagh, B., Hristovski, K., Posner, J. D. & Westerhoff, P. The release of nanosilver from consumer products used in the home. J. Environ. Qual. 39, 1875–1882 (2010).10.2134/jeq2009.0363 ↗
48. Liu, P. et al. Toxicity of nano- and micro-sized silver particles in human hepatocyte cell line L02. J. Phys. Conf. Ser. 304, 012036 (2011).10.1088/1742-6596/304/1/012036 ↗
49. Kim, M. J. & Shin, S. Toxic effects of silver nanoparticles and nanowires on erythrocyte rheology. Food Chem. Toxicol. 67, 80–86 (2014).10.1016/j.fct.2014.02.006 ↗
50. Yu, Z., Qin, W., Lin, J., Fang, S. & Qiu, J. Antibacterial mechanisms of polymyxin and bacterial resistance. Biomed. Res. Int. 2015, 679109 (2015).
51. Williams, N. X. et al. Silver nanowire inks for direct-write electronic tattoo applications. Nanoscale 11, 14294–14302 (2019).10.1039/C9NR03378E ↗
52. Le Bideau, J., Viau, L. & Vioux, A. Ionogels, ionic liquid based hybrid materials. Chem. Soc. Rev. 40, 907–925 (2011).10.1039/C0CS00059K ↗
53. Truby, R. L. et al. Soft somatosensitive actuators via embedded 3D printing. Adv. Mater. 30, 1706383 (2018).10.1002/adma.201706383 ↗
54. Wong, J. et al. 3D printing ionogel auxetic frameworks for stretchable sensors. Adv. Mater. Technol. 4, 1900452 (2019).10.1002/admt.201900452 ↗
55. Sun, J.-Y., Keplinger, C., Whitesides, G. M. & Suo, Z. Ionic skin. Adv. Mater. 26, 7608–7614 (2014).10.1002/adma.201403441 ↗
56. Lodge, T. P. A unique platform for materials design. Science 321, 50–51 (2008).10.1126/science.1159652 ↗
57. Zhu, Z., Park, H. S. & McAlpine, M. C. 3D printed deformable sensors. Sci. Adv. 6, eaba5575 (2020).10.1126/sciadv.aba5575 ↗
58. Lee, K. Y. & Mooney, D. J. Hydrogels for tissue engineering. Chem. Rev. 101, 1869–1880 (2001).10.1021/cr000108x ↗
59. Seliktar, D. Designing cell-compatible hydrogels for biomedical applications. Science 336, 1124–1128 (2012).10.1126/science.1214804 ↗
60. Yuk, H., Lu, B. & Zhao, X. Hydrogel bioelectronics. Chem. Soc. Rev. 48, 1642–1667 (2019).10.1039/C8CS00595H ↗
61. Van Vlierberghe, S., Dubruel, P. & Schacht, E. Biopolymer-based hydrogels as scaffolds for tissue engineering applications: a review. Biomacromolecules 12, 1387–1408 (2011).10.1021/bm200083n ↗
62. Albanna, M. et al. In situ bioprinting of autologous skin cells accelerates wound healing of extensive excisional full-thickness wounds. Sci. Rep. 9, 1856 (2019).10.1038/s41598-018-38366-w ↗
63. Coradin, T., Allouche, J., Boissiere, M. & Livage, J. Sol-gel biopolymer/silica nanocomposites in biotechnology. Curr. Nanosci. 2, 219–230 (2006).10.2174/1573413710602030219 ↗
64. Broguiere, N., Cavalli, E., Salzmann, G. M., Applegate, L. A. & Zenobi-Wong, M. Factor XIII cross-linked hyaluronan hydrogels for cartilage tissue engineering. ACS Biomater. Sci. Eng. 2, 2176–2184 (2016).10.1021/acsbiomaterials.6b00378 ↗
65. Murphy, S. V., Skardal, A. & Atala, A. Evaluation of hydrogels for bio-printing applications. J. Biomed. Mater. Res. A 101A, 272–284 (2013).10.1002/jbm.a.34326 ↗
66. Vijayavenkataraman, S., Lu, W. F. & Fuh, J. Y. H. 3D bioprinting of skin: a state-of-the-art review on modelling, materials, and processes. Biofabrication 8, 032001 (2016).10.1088/1758-5090/8/3/032001 ↗
67. Cacopardo, L., Guazzelli, N., Nossa, R., Mattei, G. & Ahluwalia, A. Engineering hydrogel viscoelasticity. J. Mech. Behav. Biomed. Mater. 89, 162–167 (2019).10.1016/j.jmbbm.2018.09.031 ↗
68. Yuk, H. et al. Dry double-sided tape for adhesion of wet tissues and devices. Nature 575, 169–174 (2019).10.1038/s41586-019-1710-5 ↗
69. Li, J. et al. Tough adhesives for diverse wet surfaces. Science 357, 378–381 (2017).10.1126/science.aah6362 ↗
70. Yuk, H., Zhang, T., Lin, S., Parada, G. A. & Zhao, X. Tough bonding of hydrogels to diverse non-porous surfaces. Nat. Mater. 15, 190–196 (2016).10.1038/nmat4463 ↗
71. Freyer, J. P., Fillak, D. & Jett, J. H. Use of xantham gum to suspend large particles during flow cytometric analysis and sorting. Cytometry 10, 803–806 (1989).10.1002/cyto.990100620 ↗
72. Schuurman, W. et al. Bioprinting of hybrid tissue constructs with tailorable mechanical properties. Biofabrication 3, 021001 (2011).10.1088/1758-5082/3/2/021001 ↗
73. Hinton, T. J. et al. Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels. Sci. Adv. 1, e1500758 (2015).10.1126/sciadv.1500758 ↗
74. Smith, S., Maclean, M., MacGregor, S. J., Anderson, J. G. & Grant, M. H. Exposure of 3T3 mouse fibroblasts and collagen to high intensity blue light. Int. Conf. Biomed. Eng. 23, 1352–1355 (2009).10.1007/978-3-540-92841-6_333 ↗
75. Lewis, J. B. et al. Blue light differentially alters cellular redox properties. J. Biomed. Mater. Res. B 72B, 223–229 (2005).10.1002/jbm.b.30126 ↗
76. Ligon, S. C., Liska, R., Stampfl, J., Gurr, M. & Mülhaupt, R. Polymers for 3D printing and customized additive manufacturing. Chem. Rev. 117, 10212–10290 (2017).10.1021/acs.chemrev.7b00074 ↗
77. Singh, M. et al. 3D printed conformal microfluidics for isolation and profiling of biomarkers from whole organs. Lab Chip 17, 2561–2571 (2017).10.1039/C7LC00468K ↗
78. Johnson, B. N. et al. 3D printed anatomical nerve regeneration pathways. Adv. Funct. Mater. 25, 6205–6217 (2015).10.1002/adfm.201501760 ↗
79. Lin, S. et al. Stretchable hydrogel electronics and devices. Adv. Mater. 28, 4497–4505 (2016).10.1002/adma.201504152 ↗
80. Yu, Y. et al. Multifunctional “hydrogel skins” on diverse polymers with arbitrary shapes. Adv. Mater. 31, 1807101 (2019).10.1002/adma.201807101 ↗
81. Yuk, H., Zhang, T., Parada, G. A., Liu, X. & Zhao, X. Skin-inspired hydrogel–elastomer hybrids with robust interfaces and functional microstructures. Nat. Commun. 7, 12028 (2016).10.1038/ncomms12028 ↗
82. Yang, H. et al. Printing hydrogels and elastomers in arbitrary sequence with strong adhesion. Adv. Funct. Mater. 29, 1901721 (2019).10.1002/adfm.201901721 ↗
83. Reece, T. B., Maxey, T. S. & Kron, I. L. A prospectus on tissue adhesives. Am. J. Surg. 182, S40–S44 (2001).10.1016/S0002-9610(01)00742-5 ↗
84. Vakalopoulos, K. A. et al. Mechanical strength and rheological properties of tissue adhesives with regard to colorectal anastomosis: an ex vivo study. Ann. Surg. 261, 323–331 (2015).10.1097/SLA.0000000000000599 ↗
85. Rose, S. et al. Nanoparticle solutions as adhesives for gels and biological tissues. Nature 505, 382–385 (2014).10.1038/nature12806 ↗
86. Annabi, N., Yue, K., Tamayol, A. & Khademhosseini, A. Elastic sealants for surgical applications. Eur. J. Pharm. Biopharm. 95, 27–39 (2015).10.1016/j.ejpb.2015.05.022 ↗
87. Aboali, M., Manap, N. A., Darsono, A. M. & Yusof, Z. M. Review on three-dimensional (3-D) acquisition and range imaging techniques. Int. J. Appl. Eng. 12, 2409–2421 (2017).
88. Farahani, N. et al. Three-dimensional imaging and scanning: current and future applications for pathology. J. Pathol. Inform. 8, 36–36 (2017).10.4103/jpi.jpi_32_17 ↗
89. Cohen, D. L., Lipton, J. I., Bonassar, L. J. & Lipson, H. Additive manufacturing for in situ repair of osteochondral defects. Biofabrication 2, 035004 (2010).10.1088/1758-5082/2/3/035004 ↗
90. Zhao, X., Pan, Y., Zhou, C., Chen, Y. & Wang, C. C. An integrated CNC accumulation system for automatic building-around-inserts. J. Manuf. Process. 15, 432–443 (2013).10.1016/j.jmapro.2013.05.009 ↗
91. Binder, K. W. In situ Bioprinting of the Skin. Thesis, Wake Forest Univ. (2011).
92. Li, L. et al. In situ repair of bone and cartilage defects using 3D scanning and 3D printing. Sci. Rep. 7, 9416 (2017).10.1038/s41598-017-10060-3 ↗
93. Adams, J. J. et al. Conformal printing of electrically small antennas on three-dimensional surfaces. Adv. Mater. 23, 1335–1340 (2011).10.1002/adma.201003734 ↗
94. Jafari, B. H. et al. in Proc. IEEE/RSJ Int. Conf. Intell. Robots Syst. 1789–1794 (IEEE, 2018).
95. Song, X., Pan, Y. & Chen, Y. Development of a low-cost parallel kinematic machine for multidirectional additive manufacturing. J. Manuf. Sci. Eng. 137, 021005 (2015).10.1115/1.4028897 ↗
96. Wu, C., Dai, C., Fang, G., Liu, Y.-J. & Wang, C. C. in Proc. IEEE Int. Conf. Robot. Autom. 1175–1180 (IEEE, 2017).
97. Keriquel, V. et al. In situ printing of mesenchymal stromal cells, by laser-assisted bioprinting, for in vivo bone regeneration applications. Sci. Rep. 7, 1778 (2017).10.1038/s41598-017-01914-x ↗
98. Keriquel, V. et al. In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice. Biofabrication 2, 014101 (2010).10.1088/1758-5082/2/1/014101 ↗
99. Xu, R. et al. Flexible and wearable 3D graphene sensor with 141 kHz frequency signal response capability. Appl. Phys. Lett. 111, 103501 (2017).10.1063/1.5001472 ↗
100. Chen, L. & Qi, S. 50 3D printing of dermal ECM hyfrogel enhances the therapeutic effects of split thickness skin grafting in full-thickness skin wound repair. J. Burn Care Res. 40, S35–S36 (2019).10.1093/jbcr/irz013.053 ↗