journal article·2025-03-18Open access

The road ahead in materials and technologies for volumetric 3D printing

Paulina Nunez Bernal, Sammy Florczak, Sebastian Inacker, Xiao Kuang, Jorge Madrid-Wolff, Martin Regehly, Stefan Hecht, Yu Shrike Zhang, Christophe Moser, Riccardo Levato

Nature Reviews Materials· Volume 10· Issue 11

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Blakey-Milner, B. et al. Metal additive manufacturing in aerospace: a review. Mater. Des. 209, 110008 (2021).10.1016/j.matdes.2021.110008 ↗
2. Sun, W. et al. The bioprinting roadmap. Biofabrication 12, 022002 (2020).10.1088/1758-5090/ab5158 ↗
3. Cano-Vicent, A. et al. Fused deposition modelling: current status, methodology, applications and future prospects. Addit. Manuf. 47, 102378 (2021).
4. McCann, R. et al. In-situ sensing, process monitoring and machine control in Laser Powder Bed Fusion: a review. Addit. Manuf. 45, 102058 (2021).
5. Levato, R. et al. Light-based vat-polymerization bioprinting. Nat. Rev. Methods Primers 3, 47 (2023).10.1038/s43586-023-00231-0 ↗
6. Zandrini, T., Florczak, S., Levato, R. & Ovsianikov, A. Breaking the resolution limits of 3D bioprinting: future opportunities and present challenges. Trends Biotechnol. 41, 604–614 (2023).10.1016/j.tibtech.2022.10.009 ↗
7. Moroni, L. et al. Biofabrication: a guide to technology and terminology. Trends Biotechnol. 36, 384–402 (2018).10.1016/j.tibtech.2017.10.015 ↗
8. Kelly, B. E. et al. Volumetric additive manufacturing via tomographic reconstruction. Science 363, 1075–1079 (2019).10.1126/science.aau7114 ↗
9. Loterie, D., Delrot, P. & Moser, C. High-resolution tomographic volumetric additive manufacturing. Nat. Commun. 11, 852 (2020).10.1038/s41467-020-14630-4 ↗
10. Bernal, P. N. et al. Volumetric bioprinting of complex living-tissue constructs within seconds. Adv. Mater. 31, e1904209 (2019).
11. Falandt, M. et al. Spatial-selective volumetric 4D printing and single-photon grafting of biomolecules within centimeter-scale hydrogels via tomographic manufacturing. Adv. Mater. Technol. 8, 2300026 (2023).10.1002/admt.202300026 ↗
12. Somers, P. et al. The physics of 3D printing with light. Nat. Rev. Phys. 6, 99–113 (2024).10.1038/s42254-023-00671-3 ↗
13. Shusteff, M. et al. One-step volumetric additive manufacturing of complex polymer structures. Sci. Adv. 3, eaao5496 (2017).10.1126/sciadv.aao5496 ↗
14. Whyte, D. J., Doeven, E. H., Sutti, A., Kouzani, A. Z. & Adams, S. D. Volumetric additive manufacturing: a new frontier in layer-less 3D printing. Addit. Manuf. 84, 104094 (2024).
15. Chansoria, P. et al. Light from afield: fast, high-resolution, and layer-free deep vat 3D printing. Chem. Rev. 124, 8787–8822 (2024).10.1021/acs.chemrev.4c00134 ↗
16. Madrid-Wolff, J. et al. A review of materials used in tomographic volumetric additive manufacturing. MRS Commun. 13, 764–785 (2023).10.1557/s43579-023-00447-x ↗
17. Regehly, M. et al. Xolography for linear volumetric 3D printing. Nature 588, 620–624 (2020).10.1038/s41586-020-3029-7 ↗
18. Stüwe, L. et al. Continuous volumetric 3D printing: xolography in flow. Adv. Mater. 36, e2306716 (2024).10.1002/adma.202306716 ↗
19. Corrigan, N., Li, X., Zhang, J. & Boyer, C. Xolography for the production of polymeric multimaterials. Adv. Mater. Technol. 9, 2400162 (2024).10.1002/admt.202400162 ↗
20. Hahn, V. et al. Light-sheet 3D microprinting via two-colour two-step absorption. Nat. Photon. 16, 784–791 (2022).10.1038/s41566-022-01081-0 ↗
21. Hafa, L. et al. Light sheet-based laser patterning bioprinting produces long-term viable full-thickness skin constructs. Adv. Mater. 36, e2306258 (2024).
22. Agrawal, P., Zhuang, S., Dreher, S., Mitter, S. & Ahmed, D. SonoPrint: acoustically assisted volumetric 3D printing for composites. Adv. Mater. 36, e2408374 (2024).
23. Chansoria, P., Narayanan, L. K., Schuchard, K. & Shirwaiker, R. Ultrasound-assisted biofabrication and bioprinting of preferentially aligned three-dimensional cellular constructs. Biofabrication 11, 035015 (2019).10.1088/1758-5090/ab15cf ↗
24. Tognato, R. et al. Sound-based assembly of three-dimensional cellularized and acellularized constructs. Mater. Today Bio 22, 100775 (2023).10.1016/j.mtbio.2023.100775 ↗
25. Petta, D. et al. Sound-induced morphogenesis of multicellular systems for rapid orchestration of vascular networks. Biofabrication https://doi.org/10.1088/1758-5090/abbb9c (2020).10.1088/1758-5090/abbb9c ↗
26. Habibi, M., Foroughi, S., Karamzadeh, V. & Packirisamy, M. Direct sound printing. Nat. Commun. 13, 1800 (2022).10.1038/s41467-022-29395-1 ↗
27. Kuang, X. et al. Self-enhancing sono-inks enable deep-penetration acoustic volumetric printing. Science 382, 1148–1155 (2023).10.1126/science.adi1563 ↗
28. Derayatifar, M., Habibi, M., Bhat, R. & Packirisamy, M. Holographic direct sound printing. Nat. Commun. 15, 6691 (2024).10.1038/s41467-024-50923-8 ↗
29. Bernal, P. N. et al. Volumetric bioprinting of organoids and optically tuned hydrogels to build liver-like metabolic biofactories. Adv. Mater. 34, e211054 (2022).
30. Sänger, J. C. et al. Linear volumetric additive manufacturing of zirconia from a transparent photopolymerizable ceramic slurry via xolography. Open Ceram. 19, 100655 (2024).10.1016/j.oceram.2024.100655 ↗
31. König, N. F. et al. Xolography for 3D printing in microgravity. Adv. Mater. 37, e2413391 (2024).
32. Thijssen, Q. et al. Volumetric printing of thiol-ene photo-cross-linkable poly(ε-caprolactone): a tunable material platform serving biomedical applications. Adv. Mater. 35, e2210136 (2023).
33. Wang, B. et al. Stiffness control in dual color tomographic volumetric 3D printing. Nat. Commun. 13, 367 (2022).
34. Lian, L. et al. Rapid volumetric bioprinting of decellularized extracellular matrix bioinks. Adv. Mater. 36, e2304846 (2024).
35. Xie, M. et al. Volumetric additive manufacturing of pristine silk-based (bio)inks. Nat. Commun. 14, 210 (2023).
36. Michaudel, Q., Kottisch, V. & Fors, B. P. Cationic polymerization: from photoinitiation to photocontrol. Angew. Chem. Int. Ed. 56, 9670–9679 (2017).10.1002/anie.201701425 ↗
37. Urciuolo, A. et al. Intravital three-dimensional bioprinting. Nat. Biomed. Eng. 4, 901–915 (2020).10.1038/s41551-020-0568-z ↗
38. Zhang, Y. S., Dolatshahi-Pirouz, A. & Orive, G. Regenerative cell therapy with 3D bioprinting. Science 385, 604–606 (2024).10.1126/science.add8593 ↗
39. McKenzie, T. G., Karimi, F., Ashokkumar, M. & Qiao, G. G. Ultrasound and sonochemistry for radical polymerization: sound synthesis. Chem. A Eur. J. 25, 5372–5388 (2019).10.1002/chem.201803771 ↗
40. Debbi, L. et al. Ultrasound mediated polymerization for cell delivery, drug delivery, and 3D printing. Small Methods 8, e2301197 (2024).10.1002/smtd.202301197 ↗
41. Yao, G. et al. Sound continuous production of thermosets. Adv. Funct. Mater. 34, 2312736 (2024).10.1002/adfm.202312736 ↗
42. Lee, C.-U., Cui, J., Tewani, H. R., Prabhakar, P. & Boydston, A. J. Creation of three-dimensional composite architectures via high-intensity focused ultrasound inside of foams. RSC Appl. Polym. 2, 692–700 (2024).10.1039/D4LP00002A ↗
43. Cook, C. C. et al. Highly tunable thiol-ene photoresins for volumetric additive manufacturing. Adv. Mater. 32, e2003376 (2020).
44. Orth, A. et al. Deconvolution volumetric additive manufacturing. Nat. Commun. 14, 4412 (2023).10.1038/s41467-023-39886-4 ↗
45. Barbera, L. et al. Multimaterial volumetric printing of silica-based glasses. Adv. Mater. Technol. 9, 2202117 (2024).10.1002/admt.202202117 ↗
46. Thijssen, Q., Toombs, J., Li, C. C., Taylor, H. & Van Vlierberghe, S. From pixels to voxels: a mechanistic perspective on volumetric 3D-printing. Prog. Polym. Sci. 147, 101755 (2023).10.1016/j.progpolymsci.2023.101755 ↗
47. Ligon, S. C., Liska, R., Stampfl, J., Gurr, M. & Mülhaupt, R. Polymers for 3D printing and customized additive manufacturing. Chem. Rev. 117, 10212–10290 (2017).10.1021/acs.chemrev.7b00074 ↗
48. Salajeghe, R., Meile, D. H., Kruse, C. S., Marla, D. & Spangenberg, J. Numerical modeling of part sedimentation during volumetric additive manufacturing. Addit. Manuf. 66, 103459 (2023).
49. Rizzo, R., Ruetsche, D., Liu, H. & Zenobi‐Wong, M. Optimized photoclick (bio)resins for fast volumetric bioprinting. Adv. Mater. 33, 2102900 (2021).10.1002/adma.202102900 ↗
50. Chen, X. et al. Intrinsic high refractive index siloxane-sulfide polymer networks having high thermostability and transmittance via thiol-ene cross-linking reaction. Macromolecules 51, 7567–7573 (2018).10.1021/acs.macromol.8b01586 ↗
51. Zhang, J. et al. All-organic polymeric materials with high refractive index and excellent transparency. Nat. Commun. 14, 3524 (2023).
52. Kuang, X. et al. Grayscale digital light processing 3D printing for highly functionally graded materials. Sci. Adv. 5, eaav5790 (2019).10.1126/sciadv.aav5790 ↗
53. Kuang, X. et al. High-speed 3D printing of high-performance thermosetting polymers via two-stage curing. Macromol. Rapid Commun. 39, e1700809 (2018).10.1002/marc.201700809 ↗
54. Nie, H., Self, J. L., Kuenstler, A. S., Hayward, R. C. & Read de Alaniz, J. Multiaddressable photochromic architectures: from molecules to materials. Adv. Opt. Mater. 7, 1900224 (2019).10.1002/adom.201900224 ↗
55. Kotz, F. et al. Three-dimensional printing of transparent fused silica glass. Nature 544, 337–339 (2017).10.1038/nature22061 ↗
56. Liew, L. A. et al. Fabrication of SiCN MEMS by photopolymerization of pre-ceramic polymer. Sens. Actuat. A Phys. 95, 120–134 (2002).10.1016/S0924-4247(01)00723-3 ↗
57. Toombs, J. T. et al. Volumetric additive manufacturing of silica glass with microscale computed axial lithography. Science 376, 308–312 (2022).10.1126/science.abm6459 ↗
58. Kollep, M. et al. Tomographic volumetric additive manufacturing of silicon oxycarbide ceramics. Adv. Eng. Mater. 24, 2101345 (2022).10.1002/adem.202101345 ↗
59. Huang, K., Franchin, G. & Colombo, P. Volumetric additive manufacturing of SiOC by xolography. Small 20, 2402356 (2024).10.1002/smll.202402356 ↗
60. Kotz, F. et al. Glassomer — processing fused silica glass like a polymer. Adv. Mater. 30, e1707100 (2018).
61. Llorens, J. S., Barbera, L., Demirörs, A. F. & Studart, A. R. Light-based 3D printing of complex-shaped photonic colloidal glasses. Adv. Mater. 35, e2302868 (2023).10.1002/adma.202302868 ↗
62. Fantino, E. et al. 3D printing of conductive complex structures with in situ generation of silver nanoparticles. Adv. Mater. 28, 3712–3717 (2016).10.1002/adma.201505109 ↗
63. Dylla-Spears, R. et al. 3D printed gradient index glass optics. Sci. Adv. 6, eabc7429 (2020).10.1126/sciadv.abc7429 ↗
64. Moore, D. G., Barbera, L., Masania, K. & Studart, A. R. Three-dimensional printing of multicomponent glasses using phase-separating resins. Nat. Mater. 19, 212–217 (2020).10.1038/s41563-019-0525-y ↗
65. Deore, B. et al. Direct printing of functional 3D objects using polymerization-induced phase separation. Nat. Commun. 12, 55 (2021).10.1038/s41467-020-20256-3 ↗
66. Lee, C. U., Chin, K. C. H. & Boydston, A. J. Additive manufacturing by heating at a patterned photothermal interface. ACS Appl. Mater. Interfaces 15, 16072–16078 (2023).10.1021/acsami.3c00365 ↗
67. Saccone, M. A., Gallivan, R. A., Narita, K., Yee, D. W. & Greer, J. R. Additive manufacturing of micro-architected metals via hydrogel infusion. Nature 612, 685–690 (2022).10.1038/s41586-022-05433-2 ↗
68. Gissibl, T., Thiele, S., Herkommer, A. & Giessen, H. Two-photon direct laser writing of ultracompact multi-lens objectives. Nat. Photon. 10, 554–560 (2016).10.1038/nphoton.2016.121 ↗
69. Siegle, L., Ristok, S. & Giessen, H. Complex aspherical singlet and doublet microoptics by grayscale 3D printing. Opt. Express 31, 4179 (2023).10.1364/OE.480472 ↗
70. Rackson, C. M. et al. Latent image volumetric additive manufacturing. Opt. Lett. 47, 1279 (2022).10.1364/OL.449220 ↗
71. Webber, D. et al. Micro-optics fabrication using blurred tomography. Optica 11, 665 (2024).10.1364/OPTICA.519278 ↗
72. Scott, T. F., Kowalski, B. A., Sullivan, A. C., Bowman, C. N. & McLeod, R. R. Two-color single-photon photoinitiation and photoinhibition for subdiffraction photolithography. Science 324, 913–917 (2009).10.1126/science.1167610 ↗
73. Li, L., Gattass, R. R., Gershgoren, E., Hwang, H. & Fourkas, J. T. Achieving 1/20 resolution by one-color initiation and deactivation of polymerization. Science 324, 910–913 (2009).10.1126/science.1168996 ↗
74. Fischer, J., Von Freymann, G. & Wegener, M. The materials challenge in diffraction-unlimited dired-laser-writing optical lithography. Adv. Mater. 22, 3578–3582 (2010).10.1002/adma.201000892 ↗
75. 3D Printing of Optical Components Vol. 233 (Springer International Publishing, 2021).
76. Porte, X. et al. Direct (3+1)D laser writing of graded-index optical elements. Optica 8, 1281 (2021).10.1364/OPTICA.433475 ↗
77. Drieschner, S., Kloiber, F., Hennemeyer, M., Klein, J. J. & Thesen, M. W. High quality diffractive optical elements (DOEs) using SMILE imprint technique. Adv. Opt. Technol. 10, 11–16 (2021).10.1515/aot-2020-0053 ↗
78. Wang, H. et al. Off-axis holography with uniform illumination via 3D printed diffractive optical elements. Adv. Opt. Mater. 7, 1900068 (2019).10.1002/adom.201900068 ↗
79. Wang, H., Wang, H., Zhang, W. & Yang, J. K. W. Toward near-perfect diffractive optical elements via nanoscale 3D printing. ACS Nano 14, 10452–10461 (2020).10.1021/acsnano.0c04313 ↗
80. Kedem, R. O. et al. Near index matching enables solid diffractive optical element fabrication via additive manufacturing. Light Sci. Appl. 12, 222 (2023).
81. Wallin, T. J., Pikul, J. & Shepherd, R. F. 3D printing of soft robotic systems. Nat. Rev. Mater. 3, 84–100 (2018).10.1038/s41578-018-0002-2 ↗
82. Wang, D. et al. Soft actuators and robots enabled by additive manufacturing. Annu. Rev. Control. Robot. Auton. Syst. 6, 31–63 (2023).10.1146/annurev-control-061022-012035 ↗
83. Größbacher, G. et al. Volumetric printing across melt electrowritten scaffolds fabricates multi-material living constructs with tunable architecture and mechanics. Adv. Mater. 35, 2300756 (2023).10.1002/adma.202300756 ↗
84. Darkes‐Burkey, C. & Shepherd, R. F. Volumetric 3D printing of endoskeletal soft robots. Adv. Mater. 36, 2402217 (2024).10.1002/adma.202402217 ↗
85. Chansoria, P. et al. Synergizing algorithmic design, photoclick chemistry and multi-material volumetric printing for accelerating complex shape engineering. Adv. Sci. 10, 2300912 (2023).10.1002/advs.202300912 ↗
86. Frick, A. et al. Volumetric 3D-printed piezoelectric polymer films. Adv. Mater. Technol. 9, 2301469 (2024).10.1002/admt.202301469 ↗
87. Wolstrup, A. F. et al. Fabrication of conductive structures in volumetric additive manufacturing through embedded 3-D printing for electronic applications. Addit. Manuf. Lett. 7, 100178 (2023).10.1016/j.addlet.2023.100178 ↗
88. Viola, M. et al. Thermal shrinking of biopolymeric hydrogels for high resolution 3D printing of kidney tubules. Adv. Funct. Mater. 34, 2406098 (2024).10.1002/adfm.202406098 ↗
89. de Ruijter, M., Ribeiro, A., Dokter, I., Castilho, M. & Malda, J. Simultaneous micropatterning of fibrous meshes and bioinks for the fabrication of living tissue constructs. Adv. Healthc. Mater. 8, e1800418 (2019).
90. Rizzo, R. et al. Multiscale hybrid fabrication: volumetric printing meets two-photon ablation. Adv. Mater. Technol. 8, 2201871 (2023).10.1002/admt.202201871 ↗
91. Ribezzi, D. et al. Shaping synthetic multicellular and complex multimaterial tissues via embedded extrusion‐volumetric printing of microgels. Adv. Mater. 35, 2301673 (2023).10.1002/adma.202301673 ↗
92. Gehlen, J., Qiu, W., Schädli, G. N., Müller, R. & Qin, X. H. Tomographic volumetric bioprinting of heterocellular bone-like tissues in seconds. Acta Biomater. 156, 49–60 (2023).10.1016/j.actbio.2022.06.020 ↗
93. Cianciosi, A. et al. Flexible allyl-modified gelatin photoclick resin tailored for volumetric bioprinting of matrices for soft tissue engineering. Adv. Healthc. Mater. 12, e2300977 (2023).10.1002/adhm.202300977 ↗
94. Riffe, M. B. et al. Multi-material volumetric additive manufacturing of hydrogels using gelatin as a sacrificial network and 3D suspension bath. Adv. Mater. 36, 2309026 (2024).10.1002/adma.202309026 ↗
95. Qiu, W. et al. A synthetic dynamic polyvinyl alcohol photoresin for fast volumetric bioprinting of functional ultrasoft hydrogel constructs. Adv. Funct. Mater. 33, 2214393 (2023).10.1002/adfm.202214393 ↗
96. Lavrador, P., Moura, B. S., Almeida-Pinto, J., Gaspar, V. M. & Mano, J. F. Engineered nascent living human tissues with unit programmability. Nat. Mater. 24, 143–154 (2024).10.1038/s41563-024-01958-1 ↗
97. Jeon, O. et al. Individual cell-only bioink and photocurable supporting medium for 3D printing and generation of engineered tissues with complex geometries. Mater. Horiz. 6, 1625–1631 (2019).10.1039/C9MH00375D ↗
98. Boularaoui, S., Al Hussein, G., Khan, K. A., Christoforou, N. & Stefanini, C. An overview of extrusion-based bioprinting with a focus on induced shear stress and its effect on cell viability. Bioprinting 20, e00093 (2020).10.1016/j.bprint.2020.e00093 ↗
99. Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P. & Zenobi-Wong, M. Alginate sulfate–nanocellulose bioinks for cartilage bioprinting applications. Ann. Biomed. Eng. 45, 210–223 (2017).10.1007/s10439-016-1704-5 ↗
100. Blaeser, A. et al. Controlling shear stress in 3D bioprinting is a key factor to balance printing resolution and stem cell integrity. Adv. Healthc. Mater. 5, 326–333 (2016).10.1002/adhm.201500677 ↗