journal article·2020-09Open access

A review on conventional and nonconventional machining of SiC particle-reinforced aluminium matrix composites

Ji-Peng Chen, Lin Gu, Guo-Jian He

Advances in Manufacturing· Volume 8· Issue 3

Abstract

Abstract Among the various types of metal matrix composites, SiC particle-reinforced aluminum matrix composites (SiCp/Al) are finding increasing applications in many industrial fields such as aerospace, automotive, and electronics. However, SiCp/Al composites are considered as difficult-to-cut materials due to the hard ceramic reinforcement, which causes severe machinability degradation by increasing cutting tool wear, cutting force, etc. To improve the machinability of SiCp/Al composites, many techniques including conventional and nonconventional machining processes have been employed. The purpose of this study is to evaluate the machining performance of SiCp/Al composites using conventional machining, i.e., turning, milling, drilling, and grinding, and using nonconventional machining, namely electrical discharge machining (EDM), powder mixed EDM, wire EDM, electrochemical machining, and newly developed high-efficiency machining technologies, e.g., blasting erosion arc machining. This research not only presents an overview of the machining aspects of SiCp/Al composites using various processing technologies but also establishes optimization parameters as reference of industry applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Aluminum Alloys Composites Properties · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Nicholls CJ, Boswell B, Davies IJ et al (2017) Review of machining metal matrix composites. Int J Adv Manuf Technol 90:2429–244110.1007/s00170-016-9558-4 ↗
2. Sidhu SS, Batish A, Kumar S (2013) Fabrication and electrical discharge machining of metal-matrix composites: a review. J Reinf Plast Compos 32(17):1310–132010.1177/0731684413489366 ↗
3. Benal MM, Shivanand HK (2006) Influence of heat treatment on the coefficient of thermal expansion of Al (6061) based hybrid composites. Mater Sci Eng A 435/436(6):745–74910.1016/j.msea.2006.07.136 ↗
4. Mishra AK, Srivastava RK (2017) Wear behaviour of Al-6061/SiC metal matrix composites. J Inst Eng 98(2):97–103
5. Reddy AP, Krishna PV, Rao RN (2017) Al/SiC NP and Al/SiC NP/X nanocomposites fabrication and properties: a review. Proc Inst Mech Eng Part N J Nanomater Nanoeng Nanosyst 231(4):155–172
6. Xiang J, Pang S, Xie L et al (2018) Investigation of cutting forces, surface integrity, and tool wear when high-speed milling of high-volume fraction SiCp/Al6063 composites in PCD tooling. Int J Adv Manuf Technol 98(5/8):1237–125110.1007/s00170-018-2294-1 ↗
7. Tailor S, Mohanty R, Soni P et al (2016) Wear behavior of plasma sprayed nanostructured Al-SiC composite coatings: a comparative study. Trans Indian Inst Met 69(6):1179–119110.1007/s12666-015-0692-8 ↗
8. Bushlya V, Lenrick F, Gutnichenko O et al (2017) Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiCp metal matrix composite. Wears 376/377:152–16410.1016/j.wear.2017.01.036 ↗
9. Bains PS, Sidhu SS, Payal H (2016) Fabrication and machining of metal matrix composites: a review. Mater Manuf Process 31(5):553–57310.1080/10426914.2015.1025976 ↗
10. Chambers AR (1996) The machinability of light alloy MMCs. Compos A Appl Sci Manuf 27(2):14314710.1016/1359-835X(95)00001-I ↗
11. Zhao W, Gu L, Xu H et al (2013) A novel high efficiency electrical erosion process-blasting erosion arc machining. Procedia CIRP 6:621–62510.1016/j.procir.2013.03.057 ↗
12. Ramnath BV, Elanchezhian C, Annamalai R et al (2014) Aluminium metal matrix composites-a review. Rev Adv Mater Sci 38(5):55–60
13. Shukla M, Dhakad S, Agarwal P et al (2018) Characteristic behavior of aluminium metal matrix composites: a review. Mater Today Proc 5(2):5830–583610.1016/j.matpr.2017.12.180 ↗
14. Soltani S, Khosroshahi RA, Mousavian RT et al (2017) Stir casting process for manufacture of Al-SiC composites. Rare Met 36(7):581–59010.1007/s12598-015-0565-7 ↗
15. Kainer K (2006) Custom made materials for automotive and aerospace engineering. Metal matrix nanocomposites. Wiley, Weinheim, pp 1–48
16. Muraliraja R, Arunachalam R, Al-Fori I et al (2019) Development of alumina reinforced aluminum metal matrix composite with enhanced compressive strength through squeeze casting process. Proc Inst Mech Eng Part L J Mat Des Appl 233(3):307–314
17. Sarfraz S, Jahanzaib M, Wasim A et al (2017) Investigating the effects of as-casted and in situ heat-treated squeeze casting of Al-3.5% Cu alloy. Int J Adv Manuf Technol 89(9/12):3547–356110.1007/s00170-016-9350-5 ↗
18. Sarfraz MH, Jahanzaib M, Ahmed W et al (2019) Multi-response parametric optimization of squeeze casting process for fabricating Al 6061-SiC composite. Int J Adv Manuf Technol 102(1/4):759–77310.1007/s00170-018-03278-6 ↗
19. Kini UA, Sharma S, Jagannath K et al (2015) Characterization study of aluminium 6061 hybrid composite. Int J Chem Mol Nucl Mater Metall Eng 9(6):578–582
20. Falsafi J, Rosochowska M, Jadhav P et al (2017) Lower cost automotive piston from 2124/SiC/25p metal-matrix composite. SAE Int J Engines 10(4):1984–199210.4271/2017-01-1048 ↗
21. Avci U, Temiz S (2017) A new approach to the production of partially graded and laminated composite material composed of SiC-reinforced 7039 Al alloy plates at different rates. Compos B Eng 131:76–8110.1016/j.compositesb.2017.08.002 ↗
22. Lee H, Choi JH, Jo MC et al (2018) Effects of strain rate on compressive properties in bimodal 7075 Al-SiCp composite. Met Mater Int 24(4):894–90310.1007/s12540-018-0092-9 ↗
23. Rodrıguez-Castro R, Wetherhold R, Kelestemur M (2002) Microstructure and mechanical behavior of functionally graded Al A359/SiCp composite. Mater Sci Eng A 323(1/2):445–45610.1016/S0921-5093(01)01400-9 ↗
24. Surappa M, Surappa MK (2008) Dry sliding wear of fly ash particle reinforced A356 Al composites. Wear 265(3/4):349–360
25. Chakraborty S, Kar S, Ghosh SK et al (2017) Parametric optimization of electric discharge coating on aluminium-6351 alloy with green compact silicon carbide and copper tool: a Taguchi coupled utility concept approach. Surf Interfaces 7:47–5710.1016/j.surfin.2017.02.001 ↗
26. Murty SN, Rao BN, Kashyap B (2002) On the hot working characteristics of 2124 Al-SiCp metal matrix composites. Adv Compos Mater 11(2):105–12010.1163/156855102760410315 ↗
27. Karvanis K, Fasnakis D, Maropoulos A et al (2016) Production and mechanical properties of Al-SiC metal matrix composites. IOP Conf Ser Mater Sci Eng 161:01207010.1088/1757-899X/161/1/012070 ↗
28. Min S (2009) Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites. Trans Nonferrous Met Soc China 19(6):1400–140410.1016/S1003-6326(09)60040-6 ↗
29. Ozben T, Kilickap E, Cakır O (2008) Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC. J Mater Process Technol 198(1/3):220–22510.1016/j.jmatprotec.2007.06.082 ↗
30. Milan M, Bowen P (2004) Tensile and fracture toughness properties of SiC reinforced al alloys: effects of particle size, particle volume fraction, and matrix strength. J Mater Eng Perform 13(6):775–78310.1361/10599490421358 ↗
31. El-Kady O, Fathy A (2014) Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites. Mater Des (1980–2015) 54:348–35310.1016/j.matdes.2013.08.049 ↗
32. Hong SJ, Kim HM, Huh D et al (2003) Effect of clustering on the mechanical properties of SiC particulate-reinforced aluminum alloy 2024 metal matrix composites. Mater Sci Eng, A 347(1/2):198–20410.1016/S0921-5093(02)00593-2 ↗
33. Yan C, Lifeng W, Jianyue R (2008) Multi-functional SiC/Al composites for aerospace applications. Chin J Aeronaut 21(6):578–58410.1016/S1000-9361(08)60177-6 ↗
34. Huang Y, Chen G, Wang B et al (2019) Fabrication, microstructure and properties of the mid-fraction SiC particles/6061Al composites using an optimized powder metallurgy technique. Russ J Non-Ferrous Met 60(3):312–31810.3103/S1067821219030076 ↗
35. Muthukrishnan N, Murugan M, Rao KP (2008) An investigation on the machinability of Al-SiC metal matrix composites using PCD inserts. Int J Adv Manuf Technol 38(5/6):447–45410.1007/s00170-007-1111-z ↗
36. Das S, Behera R, Majumdar G et al (2007) An experimental investigation on the machinability of powder formed silicon carbide particle reinforced aluminium metal matrix composites. Int J Heat Mass Transf 50(25/26):5054–5064
37. Dabade UA, Joshi SS, Balasubramaniam R et al (2007) Surface finish and integrity of machined surfaces on Al/SiCp composites. J Mater Process Technol 192/193(1):166–17410.1016/j.jmatprotec.2007.04.044 ↗
38. Ciftci I, Turker M, Seker U (2004) CBN cutting tool wear during machining of particulate reinforced mmcs. Wear 257(9/10):1041–104610.1016/j.wear.2004.07.005 ↗
39. Ge Y, Xu J, Yang H (2010) Diamond tools wear and their applicability when ultra-precision turning of SiCp /2009Al matrix composite. Wear 269(11/12):699–708
40. Chou YK, Liu J (2005) CVD diamond tool performance in metal matrix composite machining. Surf Coat Technol 200(56):1872–187810.1016/j.surfcoat.2005.08.094 ↗
41. Xiang J, Xie L, Gao F et al (2018) Diamond tools wear in drilling of SiCp /Al matrix composites containing copper. Ceram Int 44(5):5341–535110.1016/j.ceramint.2017.12.154 ↗
42. Durante S, Rutelli G, Rabezzana F (1997) Aluminum-based MMC machining with diamond-coated cutting tools. Surf Coat Technol 94:632–64010.1016/S0257-8972(97)00521-5 ↗
43. Karabulut S, Karako H (2017) Investigation of surface roughness in the milling of Al7075 and open-cell SiC foam composite and optimization of machining parameters. Neural Comput Appl 28(5):313–32710.1007/s00521-015-2058-x ↗
44. Sahin Y (2005) The effects of various multilayer ceramic coatings on the wear of carbide cutting tools when machining metal matrix composites. Surf Coat Technol 199(1):112–11710.1016/j.surfcoat.2005.01.048 ↗
45. Errico GE, Calzavarini R (2001) Turning of metal matrix composites. J Mater Process Technol 119(13):257–260
46. Andrewes CJE, Feng HY, Lau WM (2000) Machining of an aluminum/SiC composite using diamond inserts. J Mater Process Technol 102(13):25–2910.1016/S0924-0136(00)00425-8 ↗
47. Yousefi R, Kouchakzadeh MA, Rahiminasab J et al (2011) The influence of SiC particles on tool wear in machining of Al/SiC metal matrix composites produced by powder extrusion. Adv Mater Res 325:393–39910.4028/www.scientific.net/AMR.325.393 ↗
48. Manna A, Bhattacharayya B (2005) Influence of machining parameters on the machinability of particulate reinforced Al/SiC MMC. Int J Adv Manuf Technol 25(9/10):850–85610.1007/s00170-003-1917-2 ↗
49. Hooper RM, Henshall JL, Klopfer A (1999) The wear of polycrystalline diamond tools used in the cutting of metal matrix composites. Int J Refract Metal Hard Mater 17(13):103–10910.1016/S0263-4368(98)00040-7 ↗
50. Malli NA, Aaditya V, Raghavan R (2012) Study and analysis of PCD 1500 and 1600 grade inserts on turning Al 6061 alloy with 15% reinforcement of SiC particles on MMC. Int Proc Comput Sci Inf Technol 31:143–148
51. Klkap E, Akr O, Aksoy M et al (2005) Study of tool wear and surface roughness in machining of homogenised SiC reinforced aluminium metal matrix composite. J Mater Process Technol 164/165(10):862–86710.1016/j.jmatprotec.2005.02.109 ↗
52. Kremer A, Devillez A, Dominiak S et al (2008) Machinability of Al/SiC patriculate metal-matrix composites under dry conditions with CVD diamod-coated cabride tools. Mach Sci Technol 12(2):214–23310.1080/10910340802067494 ↗
53. Karthikeyan R, Ganesan G, Nagarazan RS et al (2001) A critical study on machining of Al/SiC composites. Adv Manuf Process 16(1):47–6010.1081/AMP-100103696 ↗
54. Manna A, Bhattacharayya B (2003) A study on machinability of Al/SiC-MMC. J Mater Process Technol 140(1/3):711–71610.1016/S0924-0136(03)00905-1 ↗
55. Ciftci I (2009) Cutting tool wear mechanism when machining particulate reinforced MMCs. Technology 12(4):275–282
56. Bhushan RK (2013) Multiresponse optimization of Al alloy-SiC composite machining parameters for minimum tool wear and maximum metal removal rate. J Manuf Sci Eng 135(2):02101310.1115/1.4023454 ↗
57. Das D, Chaubey AK, Nayak BB et al (2018) Investigation on cutting tool wear in turning Al 7075/SiCp metal matrix composite. IOP Conf Ser Mater Sci Eng 377:1211010.1088/1757-899X/377/1/012110 ↗
58. Muthukrishnan N, Davim JP (2011) An investigation of the effect of work piece reinforcing percentage on the machinability of Al-SiC metal matrix composites. Free Radic Biol Med 49(1):15–24
59. Duan C, Sun W, Che M et al (2019) Effects of cooling and lubrication conditions on tool wear in turning of Al/SiCp composite. Int J Adv Manuf Technol 103:1467–147910.1007/s00170-019-03565-w ↗
60. Kalaichelvi V, Karthikeyan R, Sivakumar D et al (2012) Tool wear classification using fuzzy logic for machining of Al/SiC composite material. Model Numer Simul Mater Sci 2(2):28–36
61. Chavoshi SZ (2011) Tool flank wear prediction in CNC turning of 7075Al alloy SiC composite. Prod Eng Res Dev 5(1):37–4710.1007/s11740-010-0282-x ↗
62. Pramanik A, Zhang LC, Arsecularatne JA (2006) Prediction of cutting forces in machining of metal matrix composites. Int J Mach Tools Manuf 46(14):1795–180310.1016/j.ijmachtools.2005.11.012 ↗
63. Antnio CAC, Davim JP (2002) Optimal cutting conditions in turning of particulate metal matrix composites based on experiment and a genetic search model. Compos A 33(2):213–21910.1016/S1359-835X(01)00094-X ↗
64. Wang J, Zuo J, Shang Z et al (2019) Modeling of cutting force prediction in machining high-volume SiCp/Al composites. Appl Math Model 70:1–1710.1016/j.apm.2019.01.015 ↗
65. Gaitonde VN, Karnik SR, Davim JP (2009) Some studies in metal matrix composites machining using response surface methodology. J Reinf Plast Compos 28(20):2445–245710.1177/0731684408092375 ↗
66. Krishnamurthy L, Sridhara BK, Abdulbudan D (2011) Comparative study on the machinability aspects of aluminium silicon carbide and aluminium graphite composites. Int J Mach Machinab Mater 10(7/8):137–152
67. Dabade UA, Dapkekar D, Joshi SS (2009) Modeling of chiptool interface friction to predict cutting forces in machining of Al/SiCp composites. Int J Mach Tools Manuf 49(9):690–70010.1016/j.ijmachtools.2009.03.003 ↗
68. Ramasubramanian K, Arunachalam N, Rao MR (2019) Wear performance of nano-engineered boron doped graded layer CVD diamond coated cutting tool for machining of Al-SiC MMC. Wear 426:1536–154710.1016/j.wear.2018.12.004 ↗
69. El-Gallab M, Sklad M (1998) Machining of Al/SiC particulate metal matrix composites: part II: workpiece surface integrity. J Mater Process Technol 83(13):277–28510.1016/S0924-0136(98)00072-7 ↗
70. Liu H, Wang S, Zong W (2019) Tool rake angle selection in micro-machining of 45 vol.% SiCp/2024Al based on its brittle-plastic properties. J Manuf Process 37:556–56210.1016/j.jmapro.2018.12.030 ↗
71. Lin JT, Bhattacharyya D, Ferguson WG (1998) Chip formation in the machining of SiC-particle-reinforced aluminium-matrix composites. Compos Sci Technol 58(2):285–29110.1016/S0266-3538(97)00126-7 ↗
72. Hung NP, Yeo SH, Lee KK et al (1998) Chip formation in machining particle-reinforced metal matrix composites. Adv Manuf Process 13(1):85–10010.1080/10426919808935221 ↗
73. Dabade UA, Joshi SS (2009) Analysis of chip formation mechanism in machining of Al/SiCp metal matrix composites. J Mater Process Technol 209(10):4704–471010.1016/j.jmatprotec.2008.10.057 ↗
74. Ge YF, Xu JH, Fu YC (2010) Surface generation and chip formation when ultra-precision turning of SiCp/Al composites. Adv Mater Res 135:282–28710.4028/www.scientific.net/AMR.135.282 ↗
75. Kishawy H, Kannan S, Balazinski M (2004) An energy based analytical force model for orthogonal cutting of metal matrix composites. CIRP Ann 53(1):91–9410.1016/S0007-8506(07)60652-0 ↗
76. Dandekar CR, Shin YC (2009) Multi-step 3-D finite element modeling of subsurface damage in machining particulate reinforced metal matrix composites. Compos A Appl Sci Manuf 40(8):1231–123910.1016/j.compositesa.2009.05.017 ↗
77. Duan C, Sun W, Fu C et al (2018) Modeling and simulation of tool-chip interface friction in cutting Al/SiCp composites based on a three-phase friction model. Int J Mech Sci 142:384–39610.1016/j.ijmecsci.2018.05.014 ↗
78. Wu Q, Xu WX, Zhang LC (2019) Machining of particulate-reinforced metal matrix composites: an investigation into the chip formation and subsurface damage. J Mater Process Technol 274:11631510.1016/j.jmatprotec.2019.116315 ↗
79. Wu Q, Xu W, Zhang L (2018) A micromechanics analysis of the material removal mechanisms in the cutting of ceramic particle reinforced metal matrix composites. Mach Sci Technol 22(4):638–65110.1080/10910344.2017.1382516 ↗
80. Wang Y, Liao W, Yang K et al (2019) Simulation and experimental investigation on the cutting mechanism and surface generation in machining SiCp/Al MMCs. Int J Adv Manuf Technol 100(5/8):1393–140410.1007/s00170-018-2769-0 ↗
81. Guo H, Wang D, Zhou L (2011) FEM prediction of chip morphology during the machining of particulates reinforced Al matrix composites. Adv Mater Res 188:220–22310.4028/www.scientific.net/AMR.188.220 ↗
82. Fathipour M, Hamedi M, Yousefi R (2013) Numerical and experimental analysis of machining of Al (20 vol% SiC) composite by the use of abaqus software. Materialwiss Werkstofftech 44(1):14–2010.1002/mawe.201300959 ↗
83. Sandhiya YN, Thamizharasan M, Subramanyam BA et al (2018) Finite element analysis of tool particle interaction, particle volume fraction, size, shape and distribution in machining of A356/SiCp. Mater Today Proc 5(8):16800–1680610.1016/j.matpr.2018.06.006 ↗
84. Dandekar CR, Shin YC (2012) Modeling of machining of composite materials: a review. Int J Mach Tools Manuf 57:102–12110.1016/j.ijmachtools.2012.01.006 ↗
85. Ge Y, Xu J, Yang H et al (2008) Workpiece surface quality when ultra-precision turning of SiCp/Al composites. J Mater Process Technol 203(1/3):166–17510.1016/j.jmatprotec.2007.09.070 ↗
86. Davim JP (2002) Diamond tool performance in machining metal matrix composites. J Mater Process Technol 128(13):100–10510.1016/S0924-0136(02)00431-4 ↗
87. Pradhan S, Singh G, Bhagi LK (2018) Study on surface roughness in machining of Al/SiCp metal matrix composite using desirability function analysis approach. Mater Today Proc 5(14):28108–2811610.1016/j.matpr.2018.10.052 ↗
88. Ding X, Liew WYH, Liu XD (2005) Evaluation of machining performance of MMC with PCBN and PCD tools. Wear 259(712):1225–123410.1016/j.wear.2005.02.094 ↗
89. Sharma S (2013) Optimization of machining process parameters for surface roughness of Al-composites. J Inst Eng India Ser C 94(4):327–333
90. Davim JP (2003) Design of optimisation of cutting parameters for turning metal matrix composites based on the orthogonal arrays. J Mater Process Technol 132(1):340–34410.1016/S0924-0136(02)00946-9 ↗
91. Palanikumar K, Karthikeyan R (2007) Assessment of factors influencing surface roughness on the machining of Al/SiC particulate composites. Mater Des 28(5):1584–159110.1016/j.matdes.2006.02.010 ↗
92. Muthukrishnan N, Davim JP (2009) Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis. J Mater Process Technol 209(1):225–23210.1016/j.jmatprotec.2008.01.041 ↗
93. Aurich JC, Zimmermann M, Schindler S et al (2016) Effect of the cutting condition and the reinforcement phase on the thermal load of the workpiece when dry turning aluminum metal matrix composites. Int J Adv Manuf Technol 82(5/8):1317–133410.1007/s00170-015-7444-0 ↗
94. Muthukrishnan N, Murugan M, Rao KP (2008) Machinability issues in turning of Al-SiC (10p) metal matrix composites. Int J Adv Manuf Technol 39(3/4):211–21810.1007/s00170-007-1220-8 ↗
95. Ge YF, Xu JH, Yang H et al (2007) Machining induced defects and the influence factors when diamond turning of SiCp/Al composites. Appl Mech Mater 10/12:626–63010.4028/www.scientific.net/AMM.10-12.626 ↗
96. Dabade U, Sonawane H, Joshi S (2010) Cutting force and surface roughness in machining Al/SiC composites of varying composition. Mach Sci Technol 14(2):258–27910.1080/10910344.2010.500950 ↗
97. Cheung CF, Chan KC, To S et al (2002) Effect of reinforcement in ultra-precision machining of Al6061/SiC metal matrix composites. Scr Mater 47(2):77–8210.1016/S1359-6462(02)00097-0 ↗
98. Wang Y, Liao W, Yang K et al (2019) Investigation on cutting mechanism of SiCp/Al composites in precision turning. Int J Adv Manuf Technol 100(1/4):963–972
99. Gnay M, Eker U (2011) Evaluation of surface integrity during machining with different tool grades of SiCp/Al-Si composites produced by powder metallurgy. Mater Sci Forum 672:319–32210.4028/www.scientific.net/MSF.672.319 ↗
100. Muguthu JN, Gao D (2013) Profile fractal dimension and dimensional accuracy analysis in machining metal matrix composites (MMCs). Mater Manuf Process 28(10):1102–110910.1080/10426914.2013.823501 ↗