Application of nonlinear fatigue damage models in power electronic module wirebond structure under various amplitude loadings
Source abstract
Abstract
This paper presents mean fatigue lifetime prediction of a wire-bond structure model in power electronic module using a failure physics approach that integrates high fidelity modelling and reduced order modelling. Loading current with variable amplitudes is applied to a finite element model of simplified wirebond structures. The resulting accumulated fatigue damage due to random loads is predicted by using reduced order modelling based on failure physics, a cycle counting algorithm, and various nonlinear fatigue damage models widely used in the literature. The reduced order modelling approach based on failure physics uses prediction data for the electro-thermo-mechanical behaviour of the wire-bond design of a power module obtained through non-linear transient finite element simulations, in particular for the fatigue life-time of the aluminium wire attached to the silicon chip of the wire in the module. The reduced order models that capture the black box function of the accumulated plastic strain are used in predicting the mean fatigue life time of the wire bond structure under random loads. One of the widely used cycle counting algorithms, rainflow counting algorithm, is used to count cycles of the temperature profile at the specific point of the wire bond structure in a power electronic module. The cycle data from the rainflow algorithm mean life time of the wire bond structure are predicted with various cumulative fatigue models. Non-linear cumulative fatigue models such as damage curve approach (DCA), double linear damage rule (DLDR), and double damage curve approach (DDCA), and linear cumulative fatigue damage model such as Palmgren–Miner rule are used to predict the mean fatigue life of the wire bond structure, and the results are compared.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Electronic Packaging and Soldering Technologies · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Held M, Jacob P, Nicoletti G, Scacco P, Poech MH (1999) Fast power cycling test for insulated gate bipolar transistor modules in traction application’. Int J Electron 86(10):1193–120410.1080/002072199132743 ↗
2. Hua L, Bailey C, Yin C (2009) Design for reliability of power electronics modules. Microelectron Reliab 49:1250–125510.1016/j.microrel.2009.07.055 ↗
3. Ramminger S, Türkes P, Wachutka G (1998) Crack mechanism in wire bonding joints’. Microelectron Reliab 38:1301–130510.1016/S0026-2714(98)00141-3 ↗
4. Ramminger S, Seliger N, Wachutka G (2000) Reliability model for Al wire bonds subjected to heel crack failures. Microelectron Reliab 40:1521–152510.1016/S0026-2714(00)00139-6 ↗
5. Bielen J, Gommans JJ, Theunis F (2006) Prediction of high cycle fatigue in aluminum bond wires: a physics of failure approach combining experiments and multi-physics simulations. In: The 7th international conference on thermal, mechanical and multiphysics simulation and experiments in micro-electronics and micro-systems, 2006. EuroSime 2006. IEEE, New York, pp 1–710.1109/ESIME.2006.1644022 ↗
6. Celnikier Y, Benabou L, Coquery G (2011) Investigation of heel crack mechanism in Al connections for power electronics modules. Microelectron Reliab 51:965–97410.1016/j.microrel.2011.01.001 ↗
7. Hager C (2000) Lifetime estimation of aluminum wire bonds based on computational plasticity. Dissertation, Swiss Federal Institute of Technology, Hartung-Gorre
8. Van Driel WD, Van Silfhout RBR, Zhang GQ (2008) Reliability of wirebonds in micro-electronic packages. Microelectron Int 25(2):15–2210.1108/13565360810875967 ↗
9. Meyyappan KN, Hansen P, McCluskey P (2003) Wire flexure fatigue model for asymmetric bond height. In: Proceedings of IPACK conference, Hawai, 200310.1115/IPACK2003-35136 ↗
10. Shinohara K, Yu Q (2010) Evaluation of fatigue life of semiconductor power device by power cycle test and thermal cycle test using finite element analysis. Engineering 2:1006–101810.4236/eng.2010.212127 ↗
11. Kostandyan EE, Sorensen J (2011) Reliability assessment of solder joints in power electronic modules by crack damage model for wind turbine applications. Energies 4:2236–224810.3390/en4122236 ↗
12. White M (2008) Microelectronics reliability: physics-of-failure based modeling and lifetime evaluation. http://nepp.nasa.gov . Assessed 6 July 2011
13. Yin CY, Lu H, Musallam M et al (2008) A physics-of-failure based prognostic method for power modules. In: Electronics packaging technology conference (EPTC) 2008, Singapore. IEEE, New York, pp 1190–119510.1109/EPTC.2008.4763591 ↗
14. Fatemi A, Yang L (1998) Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials. Int J Fatigue 20(1):9–3410.1016/S0142-1123(97)00081-9 ↗
15. Miner MA (1945) Cumulative damage in fatigue. J Appl Mech 12(3):159–16410.1115/1.4009458 ↗
16. Manson SS, Halford GR (1981) Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage. Int J Fract 17(2):169–19210.1007/BF00053519 ↗
17. Manson SS, Freche JC, Ensign CR (1967) Application of a double linear damage rule to cumulative fatigue. Paper from fatigue crack propagation, ASTM STP NO 415:384–41210.1520/STP47237S ↗
18. Halford GR (1997) Cumulative fatigue damage modeling: crack nucleation and early growth. Int J Fatigue 19:S253–S26010.1016/S0142-1123(97)00048-0 ↗
19. Nikolaidis E, Ghiocel DM, Singhal S (eds) (2007) Engineering design reliability applications: for the aerospace, automotive and ship industries. CRC Press, Boca Raton
20. Lu H, Loh WS, Bailey C et al (2008) Computer modelling analysis of the globtop’s effects on aluminium wirebond reliability. In: 2nd Electronics system-integration technology conference (ESTC). IEEE, New York, pp 1369–1374
21. ANSYS T M (2009) Academic research advanced version 12.0. ANSYS T M, Canonsburg
22. Khan WA, Culham JR (2008) Modelling of cylindrical pin-fin heat sinks for electronic packaging. IEEE Trans Compon Packag Technol 31(3):536–54510.1109/TCAPT.2008.2002554 ↗
23. Holman JP (2010) Heat transfer, 10th edn. McGraw-Hill, New York
24. Lee WW, Nguyen LT, Selvaduray GS (2000) Solder joint fatigue models: a review and applicability to chip scale packages. Microelectron Reliab 40:231–24410.1016/S0026-2714(99)00061-X ↗
25. Syed A (2004) Accumulated creep starin and energy density based thermal fatigue life prediction models for SnAgCu solder joints. In: Proceedings of the 54th electronic components and technology conference, June, 2004, pp 737–746
26. Matsuishi M, Endo T (1968) Fatigue of metals subjected to varying stress. In: Paper presented to Japan Society of Mechanical Engineers, Fukuoka, Japan, pp 37–40
27. Downing SD, Socie DF (1982) Simple rainflow counting algorithms. Int J Fatigue 4:31–4010.1016/0142-1123(82)90018-4 ↗
28. Standard A. E1049 (1985) Standard practices for cycle counting in fatigue analysis, Philadelphia
29. Stoyanov S, Rajaguru P, Bailey C (2010) Reduced order modelling for reliability optimisation of advanced micro-systems. In: 2nd International conference on engineering optimization, Lisbon, Portugal, 6–9 September
30. Cressie N (1991) Statistics for spatial data. Wiley, New York
31. Gumerov N, Duraiswami R (2007) Fast radial basis function interpolation via preconditioned Krylov iteration. SIAM J Sci Comput 29(5):1876–189910.1137/060662083 ↗
32. Wang JG, Liu GR (2002) A point interpolation meshless method based on radial basis function. Int J Numer Methods Eng 54:1623–164810.1002/nme.489 ↗