journal article·2022-06Open access

Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: a review

Prveen Bidare, Amaia Jiménez, Hany Hassanin, Khamis Essa

Advances in Manufacturing· Volume 10· Issue 2

Abstract

Abstract Additive manufacturing (AM) technologies are currently employed for the manufacturing of completely functional parts and have gained the attention of high-technology industries such as the aerospace, automotive, and biomedical fields. This is mainly due to their advantages in terms of low material waste and high productivity, particularly owing to the flexibility in the geometries that can be generated. In the tooling industry, specifically the manufacturing of dies and molds, AM technologies enable the generation of complex shapes, internal cooling channels, the repair of damaged dies and molds, and an improved performance of dies and molds employing multiple AM materials. In the present paper, a review of AM processes and materials applied in the tooling industry for the generation of dies and molds is addressed. AM technologies used for tooling applications and the characteristics of the materials employed in this industry are first presented. In addition, the most relevant state-of-the-art approaches are analyzed with respect to the process parameters and microstructural and mechanical properties in the processing of high-performance tooling materials used in AM processes. Concretely, studies on the AM of ferrous (maraging steels and H13 steel alloy) and non-ferrous (stellite alloys and WC alloys) tooling alloys are also analyzed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Merklein M, Junker D, Schaub A et al (2016) Hybrid additive manufacturing technologies: an analysis regarding potentials and applications. Phys Procedia 83:549–55910.1016/j.phpro.2016.08.057 ↗
2. Essa K, Hassanin H, Attallah MM et al (2017) Development and testing of an additively manufactured monolithic catalyst bed for HTP thruster applications. Appl Catal A Gen 542:125–13510.1016/j.apcata.2017.05.019 ↗
3. Sabouri HBA, Yetisen AK, Sadigzade R et al (2017) Three-dimensional microstructured lattices for oil sensing. Energy Fuels 31:2524–252910.1021/acs.energyfuels.6b02850 ↗
4. Li S, Hassanin H, Attallah MM et al (2016) The development of TiNi-based negative Poisson’s ratio structure using selective laser melting. Acta Mater 105:75–8310.1016/j.actamat.2015.12.017 ↗
5. Hassanin H, Alkendi Y, Elsayed M et al (2020) Controlling the properties of additively manufactured cellular structures using machine learning approaches. Adv Eng Mater 22:1–910.1002/adem.201901338 ↗
6. Hassanin H, Finet L, Cox SC et al (2018) Tailoring selective laser melting process for titanium drug-delivering implants with releasing micro-channels. Addit Manuf 20:144–155
7. Yasa E, Poyraz O, Cizioglu N et al (2015) Repair and manufacturing of high performance tools by additive manufacturing. In: The 8th international conference and exhibition on design and production of machines and dies/molds, Kuşadası, Aydın, Turkey
8. Bajaj P, Hariharan A, Kini A et al (2019) Steels in additive manufacturing: a review of their microstructure and properties. Mater Sci Eng A 772:138633. https://doi.org/10.1016/j.msea.2019.13863310.1016/j.msea.2019.138633 ↗
9. Mazur M, Leary M, McMillan M et al (2016) SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices. Rapid Prototyp J 22(3):504–51810.1108/RPJ-06-2014-0075 ↗
10. Nee AYC (2015) Handbook of manufacturing engineering and technology. Springer, London10.1007/978-1-4471-4670-4 ↗
11. Shah M, Unanue L, Bidare P et al (2010) Tool control monitoring applied to drilling. In: Proc. 6th MUGV conference, Cluny, 13–15 Oct
12. Kruth JP, Froyen L, Van Vaerenbergh J et al (2004) Selective laser melting of iron-based powder. J Mater Process Technol 149(1/3):616–62210.1016/j.jmatprotec.2003.11.051 ↗
13. Frazier WE (2014) Metal additive manufacturing: a review. J Mater Eng Perform 23(6):1917–192810.1007/s11665-014-0958-z ↗
14. Selcuk C (2011) Laser metal deposition for powder metallurgy parts. Powder Metall 54(2):94–9910.1179/174329011X12977874589924 ↗
15. 3D hubs. Producing metal parts: CNC vs. additive manufacturing. HUBS company, Amsterdam
16. Manogharan G, Wysk R, Harrysson O et al (2015) AIMS-a metal additive-hybrid manufacturing system: system architecture and attributes. Procedia Manuf 1:273–28610.1016/j.promfg.2015.09.021 ↗
17. Tofail SAM, Koumoulos EP, Bandyopadhyay A et al (2018) Additive manufacturing: scientific and technological challenges, market uptake and opportunities. Mater Today 21(1):22–3710.1016/j.mattod.2017.07.001 ↗
18. Additive Manufacturing Research Group (2020) About additive manufacturing: directed energy deposition. https://www.lboro.ac.uk/research/amrg/about/the7categoriesofadditivemanufacturing/directedenergydeposition
19. King WE, Anderson AT, Ferencz RM et al (2015) Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Appl Phys Rev 2(4):41304. https://doi.org/10.1063/1.493780910.1063/1.4937809 ↗
20. Das S (2003) Physical aspects of process control in selective laser sintering of metals. Adv Eng Mater 5(10):701–71110.1002/adem.200310099 ↗
21. Mohammed MT (2018) Mechanical properties of SLM-titanium materials for biomedical applications: a review. Mater Today Proc 5(9):17906–1791310.1016/j.matpr.2018.06.119 ↗
22. Igor S (2019) Aerospace applications of the SLM process of functional and functional graded metal matrix composites based on NiCr superalloys. In: Froes F, Boyer R (eds) Additive manufacturing for the aerospace industry, Elsevier, Amsterdam, pp 265–28110.1016/B978-0-12-814062-8.00014-5 ↗
23. Jiménez A, Bidare P, Hassanin H et al (2021) Powder-based laser hybrid additive manufacturing of metals: a review. Int J Adv Manuf Technol 114:63–9610.1007/s00170-021-06855-4 ↗
24. Gu DD, Meiners W, Wissenbach K et al (2012) Laser additive manufacturing of metallic components: materials, processes and mechanisms. Int Mater Rev 57(3):133–16410.1179/1743280411Y.0000000014 ↗
25. Liverani E, Toschi S, Ceschini L et al (2017) Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel. J Mater Process Technol 249:255–26310.1016/j.jmatprotec.2017.05.042 ↗
26. Read N, Wang W, Essa K et al (2015) Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development. Mater Des 65:417–42410.1016/j.matdes.2014.09.044 ↗
27. Bidare P, Maier RRJ, Beck RJ et al (2017) An open-architecture metal powder bed fusion system for in-situ process measurements. Addit Manuf 16:177–185
28. Bidare P, Bitharas I, Ward RM et al (2018) Fluid and particle dynamics in laser powder bed fusion. Acta Mater 142:107–12010.1016/j.actamat.2017.09.051 ↗
29. Ferrar B, Mullen L, Jones E et al (2012) Gas flow effects on selective laser melting (SLM) manufacturing performance. J Mater Process Technol 212(2):355–36410.1016/j.jmatprotec.2011.09.020 ↗
30. Seabra M, Azevedo J, Araújo A et al (2016) Selective laser melting (SLM) and topology optimization for lighter aerospace componentes. Procedia Struct Integr 1:289–29610.1016/j.prostr.2016.02.039 ↗
31. Tang L, Wu C, Zhang Z et al (2016) A lightweight structure redesign method based on selective laser melting. Metals 6(11):280. https://doi.org/10.3390/met611028010.3390/met6110280 ↗
32. Renishaw PLC (2017) RenAM 500Q multi-laser AM system. https://resources.renishaw.com/en/details/data-sheet-renam-500q--99032
33. Qiu C, Adkins NJE, Hassanin H (2015) In-situ shelling via selective laser melting: modelling and microstructural characterization. Mater Des 87:845–85310.1016/j.matdes.2015.08.091 ↗
34. Hassanin H, Essa K, Qiu C et al (2017) Net-shape manufacturing using hybrid selective laser melting/hot isostatic pressing. Rapid Prototyp J 23(4):720–72610.1108/RPJ-02-2016-0019 ↗
35. Additive Industries (2015) Tailor-made for your operation: the modular and scalable MetalFAB1. https://www.additiveindustries.com/systems/metalfab1. Accessed 17 Mar 2020
36. Bidare P, Bitharas I, Ward RM et al (2018) Laser powder bed fusion at sub-atmospheric pressures. Int J Mach Tools Manuf 130(131):65–7210.1016/j.ijmachtools.2018.03.007 ↗
37. Bidare P, Bitharas I, Ward RM et al (2018) Laser powder bed fusion in high-pressure atmospheres. Int J Adv Manuf Technol 99(1/4):543–55510.1007/s00170-018-2495-7 ↗
38. GE Additive (2015) Concept laser. https://www.ge.com/additive/de/who-we-are/concept-laser. Accessed 06 Apr 2020
39. EOS (2017) EOSTATE monitoring and quality assurance - real-time monitoring for industrial 3D printing. https://www.eos.info/software/monitoring-software. Accessed 06 Apr 2020
40. Graff HKP, Ståhlbom B, Nordenberg E et al (2016) Evaluating measuring techniques for occupational exposure during additive manufacturing of metals: a pilot study. J Ind Ecol. https://doi.org/10.1111/jiec.1249810.1111/jiec.12498 ↗
41. Yadroitsev I, Bertrand P, Smurov I (2007) Parametric analysis of the selective laser melting process. Appl Surf Sci 253(19):8064–806910.1016/j.apsusc.2007.02.088 ↗
42. Mumtaz KA, Erasenthiran P, Hopkinson N (2008) High density selective laser melting of waspaloy. J Mater Process Technol 195(1/3):220–232
43. Spierings AB, Herres N, Levy G (2011) Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts. Rapid Prototyp J 17(3):195–20210.1108/13552541111124770 ↗
44. Liu B, Wildman R, Tuck C et al (2011) Investigation the effect of particle size distribution on processing parameters optimisation in selective laser melting process. In: The 22nd annual international solid freeform fabrication symposium: an additive manufacturing conference, Austin, pp 227–238
45. Yadroitsev I, Thivillon L, Bertrand P et al (2007) Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder. Appl Surf Sci 254(4):980–98310.1016/j.apsusc.2007.08.046 ↗
46. Simonelli M, Tuck C, Aboulkhair NT et al (2015) A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V. Met Mater Trans A 46:3842–385110.1007/s11661-015-2882-8 ↗
47. King WE, Anderson AT, Ferencz RM et al (2015) Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Appl Phys Rev 2(4):41304. https://doi.org/10.1063/1.493780910.1063/1.4937809 ↗
48. Thompson SM, Bian L, Shamsaei N et al (2015) An overview of direct laser deposition for additive manufacturing; Part I: transport phenomena, modeling and diagnostics. Addit Manuf 8:36–62
49. Löffler K (2013) Developments in disk laser welding. In: Katayama S (ed) Handbook of laser welding technologies. Elsevier, pp 73–10210.1533/9780857098771.1.73 ↗
50. Petrat T, Brunner-Schwer C, Graf B et al (2019) Microstructure of Inconel 718 parts with constant mass energy input manufactured with direct energy deposition. Procedia Manuf 36:256–26610.1016/j.promfg.2019.08.033 ↗
51. Bax B, Rajput R, Kellet R et al (2018) Systematic evaluation of process parameter maps for laser cladding and directed energy deposition. Addit Manuf 21:487–494
52. Terrassa KL, Smith TR, Jiang S et al (2019) Improving build quality in directed energy deposition by cross-hatching. Mater Sci Eng A 765:138269. https://doi.org/10.1016/j.msea.2019.13826910.1016/j.msea.2019.138269 ↗
53. MAZAK (2020) Additive manufacturing: the integration of additive manufacturing technology and multi-tasking machining. https://www.mazakeu.co.uk/AM/ . Accessed 08 Apr 2020
54. Trumpf (2020) Laser metal deposition (LMD). https://www.trumpf.com/en_GB/applications/additive-manufacturing/laser-metal-deposition-lmd/. Accessed Mar 17, 2020
55. Azarniya A et al (2019) Additive manufacturing of Ti-6Al-4V parts through laser metal deposition (LMD): process, microstructure, and mechanical properties. J Alloys Compd 804:163–19110.1016/j.jallcom.2019.04.255 ↗
56. Jinoop AN, Paul CP, Mishra SK et al (2019) Laser additive manufacturing using directed energy deposition of Inconel-718 wall structures with tailored characteristics. Vacuum 166:270–27810.1016/j.vacuum.2019.05.027 ↗
57. Liu DR, Wang SH, Yan WT (2020) Grain structure evolution in transition-mode melting in direct energy deposition. Mater Des 194:108919. https://doi.org/10.1016/j.matdes.2020.10891910.1016/j.matdes.2020.108919 ↗
58. Dinovitzer M, Chen X, Laliberte J et al (2018) Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure. Addit Manuf 26:138–146
59. Wu BT, Pan ZX, Ding DH et al (2018) A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. J Manuf Process 35:127–13910.1016/j.jmapro.2018.08.001 ↗
60. McAndrew AR, Rosales MA, Colegrove PA et al (2018) Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement. Addit Manuf 21:340–349
61. Tabernero I, Paskual A, Álvarez P et al (2018) Study on arc welding processes for high deposition rate additive manufacturing. Procedia CIRP 68:358–36210.1016/j.procir.2017.12.095 ↗
62. Li JZ, Alkahari MR, Rosli NA et al (2019) Review of wire arc additive manufacturing for 3D metal printing. Int J Autom Technol 13(3):346–35310.20965/ijat.2019.p0346 ↗
63. Ding D, Pan Z, Cuiuri D et al (2015) Wire-feed additive manufacturing of metal components: technologies, developments and future interests. Int J Adv Manuf Technol 81(1/4):465–48110.1007/s00170-015-7077-3 ↗
64. Prado-Cerqueira JL, Diéguez JL, Camacho AM (2017) Preliminary development of a wire and arc additive manufacturing system (WAAM). Procedia Manuf 13:895–90210.1016/j.promfg.2017.09.154 ↗
65. Zhang X, Cui W, Li W et al (2019) A hybrid process integrating reverse engineering, pre-repair processing, additive manufacturing, and material testing for component remanufacturing. Materials 12(12):1961. https://doi.org/10.3390/ma1212196110.3390/ma12121961 ↗
66. Schmidt J (2020) Stable honeycomb structures and temperature based trajectory optimization for wire-arc additive manufacturing georg radow. Optim Eng 22:913–974
67. Ziaee M, Crane NB (2019) Binder jetting: a review of process, materials, and methods. Addit Manuf 28:781–801
68. Bai Y, Williams CB (2018) Binder jetting additive manufacturing with a particle-free metal ink as a binder precursor. Mater Des 147:146–15610.1016/j.matdes.2018.03.027 ↗
69. Lv X, Ye F, Cheng L et al (2019) Binder jetting of ceramics: powders, binders, printing parameters, equipment, and post-treatment. Ceram Int 45(10):12609–1262410.1016/j.ceramint.2019.04.012 ↗
70. Binder Jetting (BJ) (2020) Additive manufacturing. http://additivemanufacturing.com/tag/binder-jetting/. Accessed 11 May 2020
71. Vangapally S, Agarwal K, Sheldon A et al (2017) Effect of lattice design and process parameters on dimensional and mechanical properties of binder jet additively manufactured stainless steel 316 for bone scaffolds. Procedia Manuf 10:750–75910.1016/j.promfg.2017.07.069 ↗
72. Digital metal (2020) Components. https://digitalmetal.tech/. Accessed 11 May 2020
73. Cramer CL, Nandwana P, Yan J et al (2019) Binder jet additive manufacturing method to fabricate near net shape crack-free highly dense Fe-6.5 wt.% Si soft magnets. Heliyon 5(11):e02804. https://doi.org/10.1016/j.heliyon.2019.e0280410.1016/j.heliyon.2019.e02804 ↗
74. AZO materials (2012) Tool steel clasifications. https://www.azom.com/article.aspx?ArticleID=6138. Accessed 11 May 2020
75. Alizadeh E (2008) Factors influencing the machinability of sintered steels. Powder Metall Met Ceram 47(5/6):304–31510.1007/s11106-008-9021-7 ↗
76. Grzesik W (2017) Machinability of engineering materials. In Grzesik W (ed) Advanced machining processes of metallic materials, 2nd edn. Elsevier, Amsterdam, pp 241–26410.1016/B978-0-444-63711-6.00013-2 ↗
77. Jin LZ, Sandström R (1994) Machinability data applied to materials selection. Mater Des 15(6):339–34610.1016/0261-3069(94)90028-0 ↗
78. O’Sullivan D, Cotterell M (2002) Machinability of austenitic stainless steel SS303. J Mater Process Technol 124(1/2):153–15910.1016/S0924-0136(02)00197-8 ↗
79. Lanz RW, Melkote SN, Kotnis MA (2002) Machinability of rapid tooling composite board. J Mater Process Technol 127(2):242–24510.1016/S0924-0136(02)00150-4 ↗
80. Thakur DG, Ramamoorthy B, Vijayaraghavan L (2009) Study on the machinability characteristics of superalloy Inconel 718 during high speed turning. Mater Des 30(5):1718–172510.1016/j.matdes.2008.07.011 ↗
81. Benghersallah M, Boulanouar L, Coz GL et al (2010) Machinability of Stellite 6 hardfacing. EPJ Web of Conferences 6:02001. https://doi.org/10.1051/epjconf/2010060200110.1051/epjconf/20100602001 ↗
82. Hasan MS, Mazid AM, Clegg R (2016) The basics of Stellites in machining perspective. Int J Eng Mater Manuf 1(2):35–50
83. Sandberg N (2012) On the machinability of high performance tool steels. Digit Compr Summ Uppsala Diss from Fac Sci Technol 927:400
84. Zhang PR, Liu ZQ, Guo YB (2017) Machinability for dry turning of laser cladded parts with conventional vs. wiper insert. J Manuf Process 28:494–49910.1016/j.jmapro.2017.04.017 ↗
85. Courbon C et al (2019) Near surface transformations of stainless steel cold spray and laser cladding deposits after turning and ball-burnishing. Surf Coatings Technol 371:235–24410.1016/j.surfcoat.2019.01.092 ↗
86. Wang C, Li K, Chen M et al (2015) Evaluation of minimum quantity lubrication effects by cutting force signals in face milling of Inconel 182 overlays. J Clean Prod 108:145–15710.1016/j.jclepro.2015.06.095 ↗
87. Lee JC, Kang HJ, Chu WS et al (2007) Repair of damaged mold surface by cold-spray method. CIRP Ann Manuf Technol 56(1):577–58010.1016/j.cirp.2007.05.138 ↗
88. Jhavar S, Paul CP, Jain NK (2013) Causes of failure and repairing options for dies and molds: a review. Eng Fail Anal 34:519–53510.1016/j.engfailanal.2013.09.006 ↗
89. Silva B, Pires I, Quintino L (2008) Welding technologies for repairing plastic injection moulds. Mater Sci Forum 587/588:936–94010.4028/www.scientific.net/MSF.587-588.936 ↗
90. Ahn DG, Lee HJ, Cho JR et al (2016) Improvement of the wear resistance of hot forging dies using a locally selective deposition technology with transition layers. CIRP Ann Manuf Technol 65(1):257–26010.1016/j.cirp.2016.04.013 ↗
91. Cora ÖN, Koç M (2018) Wear resistance evaluation of hard-coatings for sheet blanking die. Procedia Manuf 15:590–59610.1016/j.promfg.2018.07.282 ↗
92. Ratna D (2012) Thermal properties of thermosets. In: Guo Q (ed) thermosets, Woodhead Publishing, Cambridge, UK, pp 62–9110.1533/9780857097637.1.62 ↗
93. Valls I, Hamasaiid A, PadréA (2017) High thermal conductivity and high wear resistance tool steels for cost-effective hot stamping tools. In: The 36th IDDRG conference-materials modelling and testing for sheet metal forming, Munich, Germany10.1088/1742-6596/896/1/012046 ↗
94. Launey ME, Ritchie RO (2009) On the fracture toughness of advanced materials. Adv Mater 21(20):2103–211010.1002/adma.200803322 ↗
95. Viale D, Béguinot J, Chenou F (2002) Optimizing microstructure for high toughness cold-work tool steels. In: Proceedings of the 6th international tooling conference-the use of tool steels, Karlsbad, Sweden, pp 299–318
96. Cornacchia G, Gelfi M, Faccoli M et al (2008) Influence of aging on microstructure and toughness of die-casting die steels. Int J Microstruct Mater Prop 3(2/3):195–205
97. Ebara R (2010) Fatigue crack initiation and propagation behavior of forging die steels. Int J Fatigue 32(5):830–84010.1016/j.ijfatigue.2009.07.020 ↗
98. Lee YC, Chen FK (2001) Fatigue life of cold-forging dies with various values of hardness. J Mater Process Technol 113(1/3):539–54310.1016/S0924-0136(01)00720-8 ↗
99. Ebara R, Kubota K (2008) Failure analysis of hot forging dies for automotive components. Eng Fail Anal 15(7):881–89310.1016/j.engfailanal.2007.10.016 ↗
100. Davis JR (1995) ASM specialty handbook: tool materials. ASM International, Ohio, USA