Study on 6-DOF active vibration-isolation system of the ultra-precision turning lathe based on GA-BP-PID control for dynamic loads
Source abstract
Abstract
The vibration disturbance from an external environment affects the machining accuracy of ultra-precision machining equipment. Most active vibration-isolation systems (AVIS) have been developed based on static loads. When a vibration-isolation load changes dynamically during ultra-precision turning lathe machining, the system parameters change, and the efficiency of the active vibration-isolation system based on the traditional control strategy deteriorates. To solve this problem, this paper proposes a vibration-isolation control strategy based on a genetic algorithm-back propagation neural network-PID control (GA-BP-PID), which can automatically adjust the control parameters according to the machining conditions. Vibration-isolation simulations and experiments based on passive vibration isolation, a PID algorithm, and the GA-BP-PID algorithm under dynamic load machining conditions were conducted. The experimental results demonstrated that the active vibration-isolation control strategy designed in this study could effectively attenuate vibration disturbances in the external environment under dynamic load conditions. This design is reasonable and feasible.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Iterative Learning Control Systems · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Ma S, Zhang GQ, Wang JP et al (2022) An on-line identification method of tool-below-center error in single-point diamond turning. J Manuf Process 79:154–16510.1016/j.jmapro.2022.04.040 ↗
2. Jiang X, Guo M, Li B (2018) Active control of high-frequency tool-workpiece vibration in micro-grinding. Int J Adv Manuf Technol 94(1/4):1429–143910.1007/s00170-017-1015-5 ↗
3. Ma H, Guo J, Wu J et al (2020) An active control method for chatter suppression in thin plate turning. IEEE Trans Ind Inf 16(3):1742–175310.1109/TII.2019.2924829 ↗
4. Qian F, Wu Z, Zhang M et al (2019) Youla parameterized adaptive vibration control against deterministic and band-limited random signals. Mech Syst Signal Process 134:106359. https://doi.org/10.1016/j.ymssp.2019.10635910.1016/j.ymssp.2019.106359 ↗
5. Ding YY, Rui XT, Chen YH et al (2023) Theoretical and experimental investigation on the surface stripes formation in ultra-precision fly cutting machining. Int J Adv Manuf Technol 124:1041–1063. https://doi.org/10.1007/s00170-022-10493-910.1007/s00170-022-10493-9 ↗
6. Chai YY, Jing XJ, Chao X (2022) X-shaped mechanism based enhanced tunable QZS property for passive vibration isolation. Int J Mech Sci 218:107077. https://doi.org/10.1016/j.ijmecsci.2022.10707710.1016/j.ijmecsci.2022.107077 ↗
7. Yan G, Qi WH, Shi JW et al (2022) Bionic paw-inspired structure for vibration isolation with novel nonlinear compensation mechanism. J Sound Vib 525:116799. https://doi.org/10.1016/j.jsv.2022.116799r10.1016/j.jsv.2022.116799r ↗
8. Yang B, Hu Y, Fang H et al (2017) Research on arrangement scheme of magnetic suspension isolator for multi-degree freedom vibration isolation system. J Ind Inf Integr 6:47–55
9. Zhang B, Dong W, Li X et al (2020) Design of active-passive composite vibration isolation system of magnetic levitation and spring based on fuzzy PID control. In: Chinese automation congress, Shanghai, 6‒8 November, pp 2381–238610.1109/CAC51589.2020.9326769 ↗
10. Xu J, Yang X, Li W et al (2020) Research on semi-active vibration isolation system based on electromagnetic spring. Mech Ind 21(1):101. https://doi.org/10.1051/meca/201904810.1051/meca/2019048 ↗
11. Kheiri Sarabi B, Sharma M, Kaur D (2018) Active vibration control based on LQR technique for two degrees of freedom system. In: Nandi A, Sujatha N, Menaka R et al (eds) Computational signal processing and analysis. Lecture notes in electrical engineering, vol 490, Springer, Singapore. https://doi.org/10.1007/978-981-10-8354-9_1510.1007/978-981-10-8354-9_15 ↗
12. Jiang D, Li J, Li X et al (2020) Modeling identification and control of a 6-DOF active vibration isolation system driving by voice coil motors with a Halbach array magnet. J Mech Sci Technol 34(2):617–63010.1007/s12206-019-1208-y ↗
13. Ab Rahim S, Muthalif AGA, Tunthim KK et al (2019) Active vibration isolation system (AVIS) using a voice coil actuator to improve free space optics communication. In: IEEE 10th control and system graduate research colloquium (ICSGRC), Shah Alam, Malaysia. https://doi.org/10.1109/ICSGRC.2019.883705310.1109/ICSGRC.2019.8837053 ↗
14. Lee JH, Kim HY, Kim KH et al (2017) Control of a hybrid active–passive vibration isolation system. J Mech Sci Technol 31(12):5711–571910.1007/s12206-017-1112-2 ↗
15. Chen F (2018) Vibration suppression with electromagnetic hybrid vibration isolators. In: The 9th international conference on mechatronics and manufacturing (ICMM 2018), Phuket, Thailand. https://doi.org/10.1088/1757-899X/361/1/01201210.1088/1757-899X/361/1/012012 ↗
16. Yonezawa H, Kajiwara I, Yonezawa A et al (2019) Model-free vibration control to enable vibration suppression of arbitrary structures. In: The 12th Asian control conference (ASCC), Kitakyushu, Japan, pp 289–294
17. Liu YJ, Xu H, Zhang YG et al (2017) Burner-electrode position control of calcium carbide furnace based on BP-PID controller. In: IEEE international conference on mechatronics and automation (ICMA), Takamatsu, Japan. https://doi.org/10.1109/ICMA.2017.801592010.1109/ICMA.2017.8015920 ↗
18. Wang JL, Tan R, Nie LY (2022) A steady-state flight control algorithm combining stretching ratio coefficient and PID control for UAVs in uncertain environments. Sustainability 14(22):14678. https://doi.org/10.3390/su14221467810.3390/su142214678 ↗
19. Song C, Yu C, Xiao Y et al (2017) Fuzzy logic control based on genetic algorithm for a multi-source excitations floating raft active vibration isolation system. Adv Mech Eng 9(6):1–1310.1177/1687814017705843 ↗
20. Su Z, Li W, Xie W (2019) Simulation analysis of control system for six degrees of freedom damping platform based on Matlab. In: IOP conference series: materials science and engineering, vol 612, pp 032078. https://doi.org/10.1088/1757-899X/612/3/03207810.1088/1757-899X/612/3/032078 ↗
21. Liu Y, Jiang D, Yun JT et al (2022) Self-tuning control of manipulator positioning based on fuzzy PID and PSO algorithm. Front Bioeng Biotechnol 9:12. https://doi.org/10.3389/fbioe.2021.81772310.3389/fbioe.2021.817723 ↗
22. Yang L, Su K, Liu S et al (2017) Study on active vibration isolation system using neural network sliding mode control. J Vibroengineering 19(8):6094–610410.21595/jve.2017.15195 ↗
23. Liu J, Li X, Zhang X et al (2019) Modeling and simulation of energy-regenerative active suspension based on BP neural network PID control. Shock Vib 2019:4609754. https://doi.org/10.1155/2019/460975410.1155/2019/4609754 ↗
24. Wang R, Yang S, Wang D (2019) Intelligent piezoelectric peristaltic linear driving model based on neural network. J Intell Fuzzy Syst 37(1):455–46510.3233/JIFS-179100 ↗
25. Gulcu S (2022) Training of the feed forward artificial neural networks using dragonfly algorithm. Appl Soft Comput 124:109023. https://doi.org/10.1016/j.asoc.2022.10902310.1016/j.asoc.2022.109023 ↗
26. Ren HJ, Hou B, Zhou G et al (2020) Variable pitch active disturbance rejection control of wind turbines based on BP neural network PID. IEEE Access 8:71782–7179710.1109/ACCESS.2020.2987912 ↗
27. Ye HY, Ni XD, Chen HJ et al (2022) Constant speed control of hydraulic travel system based on neural network algorithm. Processes 10(5):17. https://doi.org/10.3390/pr1005094410.3390/pr10050944 ↗
28. Song L, Huang LJ, Long B et al (2020) A genetic-algorithm-based DC current minimization scheme for transformless grid-connected photovoltaic inverters. Energies 13(3):746. https://doi.org/10.3390/en1303074610.3390/en13030746 ↗
29. Yang J, Hu YP, Zhang KX et al (2021) An improved evolution algorithm using population competition genetic algorithm and self-correction BP neural network based on fitness landscape. Soft Comput 25(3):1751–177610.1007/s00500-020-05250-7 ↗
30. Chen YP, Liu SR, Xiong C et al (2019) Research on UAV flight tracking control based on genetic algorithm optimization and improved bp neural network pid control. In: 2019 Chinese automation congress (CAC), Hangzhou, China. https://doi.org/10.1109/CAC48633.2019.899617910.1109/CAC48633.2019.8996179 ↗
31. Zhang XL, Fan HM, Zang JY et al (2015) Nonlinear control of triple inverted pendulum based on GA-PIDNN. Nonlinear Dyn 79(2):1185–119410.1007/s11071-014-1735-0 ↗