journal article·2019-04

Mechanism for improvement of friction/wear by using Al2O3 and SiO2/Gear oil nanolubricants

Ankit Kotia, Gaurab Kumar Ghosh, Isha Srivastava, Piyush Deval, Subrata Kumar Ghosh

Publisher page

Abstract

Abstract Gear oil of heavy mining machineries are designed to provide anti-wear and anti-friction protection under extreme load condition. In present study thermophysical and tribological properties of industrial gear oil with nanoparticles additives (Al2O3 and SiO2) has been experimentally evaluated. Morphology of dry nanoparticles under FE-SEM shows that both nanoparticles are spherical. DLS test shows the presence of mild-agglomeration of nanoparticles in the dispersion. Density and viscosity of nanolubricants is tested with varying temperature and particle volume fraction. Measured viscosity results for Al2O3/gear oil nanolubricants follow the existing empirical model and new model has been proposed for SiO2/gear oil nanolubricants. Anti-friction and anti-wear properties of nanolubricants are tested on pin-on-disc test apparatus. FE-SEM and energy dispersive spectroscopy (EDS) analysis of wear scar (pin SS-304), evident the occurrence of ball bearing and surface polishing effects, which may be responsible for advanced tribological properties of the oil. Test results reveals that ball bearing have dominating effect in enhancement of tribological performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Lubricants and Their Additives · Tribology and Wear Analysis · Gear and Bearing Dynamics Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Enhancing the thermophysical and tribological performance of gear oil using Ni-promoted ultrathin MoS2 nanocomposites10.1016/j.triboint.2018.03.030 ↗
2. Experimental evaluation on the tribological properties of coconut oil by the addition of CuO nanoparticles10.1007/s12541-012-0015-5 ↗
3. Experimental analysis of tribological properties of biolubricant with nanoparticle additive10.1016/j.proeng.2013.12.161 ↗
4. Nanodiamond-based nanolubricants for motor oils10.1016/j.cossms.2016.07.003 ↗
5. Kotia · 2018
6. Influence of oil temperature on gear failures10.1016/S0301-679X(03)00047-1 ↗
7. Thermo-physical properties of hybrid nanofluids and hybrid nanolubricants: a comprehensive review on performance10.1016/j.icheatmasstransfer.2017.03.008 ↗
8. Enhanced thermophysical properties of copper nanoparticles dispersed in gear oil10.1016/j.applthermaleng.2013.03.022 ↗
9. A novel study on rheological behavior of ZnO-MWCNT/10w40 nanofluid for automotive engines10.1016/j.molliq.2017.11.135 ↗
10. Experimental analysis for rheological properties of aluminium oxide (Al2O3)/gear oil (SAE EP-90) nanolubricant used in HEMM10.1108/ILT-03-2015-0029 ↗
11. An experimental investigation of the influence of the lubricant viscosity and additives on gear wear10.1080/05698190490278949 ↗
12. Analysis of anti-wear properties of CuO nanoparticles as friction modifiers in mineral oil (460cSt Viscosity) using pin-on-disk tribometer
13. Experimental analysis of tribological properties of lubricating oils with nanoparticle additives10.1016/j.wear.2006.08.021 ↗
14. Tribological properties of CeF3 nanoparticles as additives in lubricating oils10.1016/S0043-1648(99)00084-8 ↗
15. CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants10.1016/j.wear.2007.11.013 ↗
16. Influence of magnetic field on Al2O3-H2O nanofluid forced convection heat transfer in a porous lid driven cavity with hot sphere obstacle by means of LBM10.1016/j.molliq.2018.04.111 ↗
17. MHD mixed convection in a vertical annulus filled with Al2O3-water nanofluid considering nanoparticle migration10.1016/j.jmmm.2015.01.060 ↗
18. Forced convection analysis for MHD Al2O3-water nanofluid flow over a horizontal plate10.1016/j.molliq.2013.08.008 ↗
19. Numerical modeling for alumina nanofluid magnetohydrodynamic convective heat transfer in a permeable medium using Darcy law10.1016/j.ijheatmasstransfer.2018.07.013 ↗
20. Numerical study of mixed convection in an inclined two sided lid driven cavity filled with nanofluid using two-phase mixture model10.1016/j.icheatmasstransfer.2011.08.003 ↗
21. Wear and performance analysis of a 4-stroke diesel engine employing nanolubricants10.1016/j.partic.2017.05.016 ↗
22. Rheology of mineral oil-SiO2 nanofluids at high pressure and high temperatures10.1016/j.ijthermalsci.2013.10.016 ↗
23. Investigation on ethylene glycol-water mixture fluid suspend by hybrid nanoparticles (TiO2-CuO) over rotating cone with considering nanoparticles shape factor10.1016/j.molliq.2018.09.084 ↗
24. Finite element method for PCM solidification in existence of CuO nanoparticles10.1016/j.molliq.2018.05.132 ↗
25. MHD raviative boundary layer analysis of micropolar dusty fluid with graphene oxide (Go)- engine oil nanoparticles in a porous medium over a stretching sheet with joule heating effect10.1016/j.powtec.2018.07.045 ↗
26. Effect of the size and morphology of particles dispersed in nano-oil on friction performance between rotating discs10.1007/s12206-011-0724-1 ↗
27. Tribological properties of Al2O3 nanoparticles as lubricating oil additives10.1016/j.ceramint.2013.12.050 ↗
28. Tribological properties of Al2O3 nanoparticles added in SN-500 base oil
29. Tribological properties of SiO2 nanoparticles added in SN-500 base oil
30. Fundamental understanding of the tribological and thermal behavior of Ag–MoS2 nanoparticle-based multi-component lubricating system10.1016/j.wear.2012.03.003 ↗
31. Stachowiak · 2001
32. Friction and wear behaviour of boron based surface treatment and nano-particle lubricant additives for wind turbine gearbox applications10.1016/j.wear.2010.11.060 ↗
33. Morphology investigation of worn bearing surfaces using SiO2 nanolubrication system10.1007/s00170-013-5340-z ↗
34. Wear and performance analysis of a 4-stroke diesel engine employing nanolubricants10.1016/j.partic.2017.05.016 ↗
35. Lubricating oil effects on the transient performance of a turbocharged diesel engine10.1016/j.energy.2009.08.009 ↗
36. Rheology of mineral oil-SiO2 nanofluids at high pressure and high temperatures10.1016/j.ijthermalsci.2013.10.016 ↗
37. Effect of copper oxide nanoparticles on thermophysical properties of hydraulic oil-based nanolubricants10.1007/s40430-016-0664-x ↗
38. Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil10.1016/j.jclepro.2014.10.027 ↗
39. Preparation of Ni nanoparticles and evaluation of their tribological performance as potential additives in oils10.1115/1.1286152 ↗
40. A study on the tribological characteristics of graphite nano lubricants10.1007/s12541-009-0013-4 ↗
41. Mechanism of action of colloidal solid dispersions10.1115/1.1537752 ↗
42. The tribology properties of alumina/silica composite nanoparticles as lubricant additives10.1016/j.apsusc.2011.01.084 ↗