Effects of Ni and Mn doping on physicochemical and electrochemical performances of LiFePO4/C
Source abstract
Abstract
Abstract The LiNixFe1−xPO4/C (x = 0.00, 0.01, 0.02, 0.03, 0.04), LiMnyFe1−yPO4/C (y = 0.00, 0.01, 0.02, 0.03, 0.04) and LiNi0.02Mn0.03FePO4 composites have been successfully synthesized by a simple solid-state method. The structure, morphology and electrochemical property of the as-prepared materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and charge/discharge tests. The XRD patterns indicate that doping with Ni2+ or Mn2+ do not affect the structure of olivine LiFePO4. The results of electrochemical performance measurements reveal that the LiNi0.02Fe0.98PO4/C shows the best electrochemical performance among all of the single Ni-doped samples. Meanwhile, comparing with other single Mn-doped materials, the LiMn0.03Fe0.97PO4/C show the highest initial discharge capacity and excellent cyclic stability. In order to further improve the electrochemical performance of LiFePO4/C, LiNi0.02Mn0.03Fe0.95PO4/C composite with Ni and Mn co-doping was also synthesized by the same route. Relative to other samples, the LiNi0.02Mn0.03Fe0.95PO4/C delivers higher initial discharge capacity of 164.3 mAh g−1 at a rate of 0.1 C. Moreover, it also exhibits excellent cyclic stability with capacity retention of 98.7% cycled at 1 C after 100 cycles. CV shows that the Ni and Mn dual-doping reduce the electrode polarization, which may be the important factors for improving the electrochemical properties of the cathode materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Performance and resource considerations of Li-ion battery electrode materials10.1039/C5EE00685F ↗
2. Ultimate limits to intercalation reactions for lithium batteries10.1021/cr5003003 ↗
3. Nickel-rich and lithium-rich layered oxide cathodes: progress and perspectives10.1002/aenm.201501010 ↗
4. Olivine LiFePO4: the remaining challenges for future energy storage10.1039/C4EE04016C ↗
5. Li fast ion conductive La0.56Li0.33TiO3 inlaid LiFePO4/C microspheres with enhanced high-rate performance as cathode materials10.1016/j.electacta.2014.11.179 ↗
6. Electrochemical properties of V and Ti co-doping Li1.02FePO4/C material prepared by solid-state synthesis route10.1016/j.jallcom.2015.12.067 ↗
7. Development and challenges of LiFePO4 cathode material for lithium-ion batteries10.1039/C0EE00029A ↗
8. Effect of vanadium incorporation on electrochemical performance of LiFePO4 for lithium-ion batteries10.1021/jp2034906 ↗
9. An economic and scalable approach to synthesize high power LiFePO4/C nanocomposites from nano·FePO4 precipitated from an impinging jet reactor10.1039/c3ta11586k ↗
10. A novel preparation route for multi-doped LiFePO4/C from spent electroless nickel plating solution10.1016/j.jallcom.2015.01.110 ↗
11. Improved electrochemical properties of LiFePO4/graphene cathode nanocomposite prepared by one-step hydrothermal method10.1016/j.jallcom.2014.12.025 ↗
12. A novel nano structured LiFePO4/C composite as cathode for Li-ion batteries10.1016/j.jpowsour.2014.04.147 ↗
13. Influence of particle size and crystal orientation on the electrochemical behavior of carbon-coated LiFePO410.1021/jp1025834 ↗
14. Synthesis of Fe2P coated LiFePO4 nanorods with enhanced Li-storage performance10.1016/j.jallcom.2014.12.046 ↗
15. Effect of thermal treatment on the properties of electrospun LiFePO4-carbon nanofiber composite cathode materials for lithium-ion batteries10.1016/j.jallcom.2014.12.067 ↗
16. Crystal orientation tuning of LiFePO4 nanoplates for high rate lithium battery cathode materials10.1021/nl3027839 ↗
17. Plate-like LiFePO4/C composite with preferential (010) lattice plane synthesized by cetyltrimethyl ammonium bromide-assisted hydrothermal carbonization10.1016/j.jallcom.2015.08.071 ↗
18. Mesoporous carbon-coated LiFePO4 nanocrystals CO-modified with graphene and Mg2+ doping as superior cathode materials for lithium ion batteries10.1039/C3NR04611G ↗
19. Improved electrochemical performance of LiFePO4/C cathode via Ni and Mn co-doping for lithium-ion batteries10.1016/j.jpowsour.2013.03.035 ↗
20. Rapid and facile synthesis of Mn doped porous LiFePO4/C from iron carbonyl complex10.1016/j.joei.2015.01.013 ↗
21. Structural and electrochemical properties of Nd-doped LiFePO4/C prepared without using inert gas10.1016/j.ssi.2011.03.025 ↗
22. Chemical lithiation route to size-controllable LiFePO4/C nanocomposite10.1007/s10800-013-0542-5 ↗
23. Ammonia assisted hydrothermal synthesis of monodisperse LiFe'/C microspheres as cathode material for lithium ion batteries10.1149/2.095112jes ↗