Microstructural evolution and degradation mechanism of SiC–Cu chip attachment using sintered nano-Ag paste during high-temperature ageing
Source abstract
Abstract
Abstract The high-temperature reliability of nano-Ag pastes on bare Cu substrates is of great significance in power electronics. Although Cu metallization in sintered joints is susceptible to oxidation in air, methods to inhibit the oxidation under high temperatures are rarely studied. In this paper, a SiC–Cu interconnection with an average shear strength of 161.7 MPa was fabricated using nano-Ag paste by a two-step sintering process. The microstructure of the sintered silver was investigated by the transmitted Kikuchi diffraction (TKD) technique, and the formation of robust joints was attributed to the low porosity, fine gain size and high density of twins. Pores in the sintered silver were isolated, which effectively impeded the penetration of oxygen and growth of Cu oxide during high-temperature thermal storage. Two kinds of failure mechanisms were determined: the growth of a Cu2O band and the evolution of a dense sintered layer. Overall, we propose a sintering method for SiC–Cu interconnections that could guarantee long-term service at 200 °C and short-term service at 300 °C in air.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. High-temperature degradation of GaN LEDs related to passivation10.1109/TED.2006.885544 ↗
2. High temperature stability and the performance degradation of SiC MOSFETs10.1109/TPEL.2013.2283509 ↗
3. Electronics without lead10.1126/science.1110168 ↗
4. Thermal behavior of silver nanoparticles for low-temperature interconnect applications10.1007/s11664-005-0229-8 ↗
5. Bimodal sintered silver nanoparticle paste with ultrahigh thermal conductivity and shear strength for high temperature thermal interface material applications10.1021/acsami.5b01341 ↗
6. Bonding strength of multiple SiC die attachment prepared by sintering of Ag nanoparticles10.1016/j.jmatprotec.2014.08.002 ↗
7. Reliability of Ag sintering for power semiconductor die attach in high-temperature applications10.1109/TPEL.2016.2631128 ↗
8. High-temperature reliability of low-temperature and pressureless micron Ag sintered joints for die attachment in high-power device10.1007/s10854-018-8903-9 ↗
9. Microstructural and mechanical evolution of silver sintering die attach for SiC power devices during high temperature applications10.1016/j.jallcom.2018.10.067 ↗
10. Low-stress design of bonding structure and its thermal shock performance (− 50 to 250 °C) in SiC/DBC power die-attached modules10.1007/s10854-018-9568-0 ↗
11. Effects of twin grain boundaries on the subgrain rotation of the solder joint during thermal shock10.1016/j.microrel.2017.03.013 ↗
12. Pressureless sintering of microscale silver paste for 300 °C applications10.1109/TCPMT.2015.2455811 ↗
13. Metal-metal bonding process using Ag metallo-organic nanoparticles10.1016/j.actamat.2005.01.047 ↗
14. Silver nanoparticle paste for low-temperature bonding of copper10.1007/s11664-011-1594-0 ↗
15. Low-temperature Cu-to-Cu bonding using silver nanoparticles stabilised by saturated dodecanoic acid10.1016/j.msea.2014.07.002 ↗
16. A novel multiscale silver paste for die bonding on bare copper by low-temperature pressure-free sintering in air10.1016/j.matdes.2017.11.054 ↗
17. Low-temperature and pressureless sinter joining of Cu with micron/submicron Ag particle paste in air10.1016/j.jallcom.2018.11.251 ↗
18. Study on high temperature bonding reliability of sintered nano-silver joint on bare copper plate10.1016/j.microrel.2015.10.017 ↗
19. Microstructure evolution during 300 °C storage of sintered Ag nanoparticles on Ag and Au substrates10.1016/j.jallcom.2014.08.062 ↗
20. High-temperature reliability of sintered microporous Ag on electroplated Ag, Au, and sputtered Ag metallization substrates10.1007/s10854-017-8087-8 ↗
21. Interfacial oxidation protection and thermal-stable sinter Ag joining on bare Cu substrate by single-layer graphene coating10.1016/j.apsusc.2019.143797 ↗
22. Are sintered silver joints ready for use as interconnect material in microelectronic packaging?10.1007/s11664-013-2967-3 ↗
23. Patent landscape and market segments of sintered silver as die attach materials in microelectronic packaging
24. The mechanism of pore segregation in the sintered nano Ag for high temperature power electronics applications10.1016/j.matlet.2018.06.007 ↗
25. Ag microflake-reinforced nano-Ag paste with high mechanical reliability for high-temperature applications10.1007/s10854-019-00846-8 ↗
26. Low-pressure-assisted large-area (>800 mm2) sintered-silver bonding for high-power electronic packaging10.1109/TCPMT.2017.2773100 ↗
27. Sintering of nanoceramics10.1179/174328008X254358 ↗
28. In situ rapid thermal oxidation and reduction of copper thin films and their applications in ultralarge scale integration10.1149/1.1413480 ↗
29. Diffusion coefficient and electromigration velocity of copper in thin silver films10.1063/1.1663466 ↗
30. Diffusion in copper and copper alloys, Part II. Copper-silver and copper-gold systems10.1063/1.3253145 ↗
31. Microstructural studies and bonding strength of pressureless sintered nano-silver joints on silver, direct bond copper (DBC) and copper substrates aged at 300 °C10.1016/j.jallcom.2016.06.132 ↗
32. Evolution of the nanoporous microstructure of sintered Ag at high temperature using in-situ X-ray nanotomography10.1016/j.actamat.2018.06.047 ↗
33. Mechanical properties of nano-silver joints as die attach materials10.1016/j.jallcom.2011.10.092 ↗
34. Review of silver nanoparticle based die attach materials for high power/temperature applications10.1016/j.microrel.2017.01.010 ↗
35. Die attach materials for high temperature applications: a review10.1109/TCPMT.2010.2100432 ↗
36. Ageing sintered silver: relationship between tensile behavior, mechanical properties and the nanoporous structure evolution10.1016/j.msea.2016.05.108 ↗
37. In situ bridging effect of Ag2O on pressureless and low-temperature sintering of micron-scale silver paste10.1016/j.jallcom.2016.11.225 ↗
38. Deformation behavior of sintered nanocrystalline silver layers10.1016/j.actamat.2015.06.040 ↗
39. Orientation mapping of nanostructured materials using transmission Kikuchi diffraction in the scanning electron microscope10.1016/j.ultramic.2012.06.004 ↗
40. Nano twins in ultrafine-grained Ti processed by dynamic plastic deformation10.1016/j.scriptamat.2012.11.025 ↗
41. On-axis TKD for orientation mapping of nanocrystalline materials in SEM10.1016/j.matchar.2017.05.036 ↗
42. Rapid pressureless low-temperature sintering of Ag nanoparticles for high-power density electronic packaging10.1016/j.scriptamat.2013.08.031 ↗
43. Deep crystallization induced high thermal conductivity of low-temperature sintered Ag nanoparticles10.1016/j.matlet.2013.11.030 ↗
44. Deformation twinning in nanocrystalline materials10.1016/j.pmatsci.2011.05.001 ↗
45. Oxidation-rate excursions during the oxidation of copper in gaseous environments at moderate temperatures10.1023/A:1027331605417 ↗
46. A study of the transient liquid phase bonding process applied to a Ag/Cu/Ag sandwich joint10.1007/BF02649282 ↗
47. The Ag-Cu (silver-copper) system