journal article·2022-04

Hot deformation characteristics of NiTiV shape memory alloy and modeling using constitutive equations and artificial neural networks

S. Santosh, V. Sampath, R.R. Mouliswar

Publisher page

Abstract

In this study, an alloy conforming to the composition Ni 50Ti 48V 2 (at. %)was cast in a vacuum induction melting furnace, and hot deformation tests were performed on the samples using a GLEEBLE 3800 thermomechanical simulator over a range of strain rates (0.01 s −1, 0.1 s −1, 1 s −1, 10 s −1 ) and temperatures (1073 K, 1173 K, 1273 K, 1373 K). Deformation processing maps, which are a combination of instability map and efficiency map, were derived based on dynamic materials model. The mechanisms of deformation were interpreted based on stress-strain plots, kinetic analysis, process maps and microstructure. Material constants along with activation energy, which was found out to be 205.58 kJ/mol., were calculated. Since strain also plays a major role in this analysis, a Strain-Compensated Arrhenius-Type (SCAT) model was developed. A comparison between strain-compensated Arrhenius type and artificial neural network models (ANNM) was made through the use of relative error, adjusted R 2 values and root mean square errors between the predicted and experimental stress values. All three parameters unanimously indicated the use of ANNM for predicting the stresses developed in the material during hot deformation process. Finally, the flow stress required for the onset of dynamic recrystallization (DRX) was calculated using work hardening theory and correlated with the power dissipation efficiency generated from processing maps. Results show that Ni 50Ti 48V 2 exhibits the highest power dissipation efficiency of 43.50% when deformed at 1173 K and 0.01 s −1. The least critical stress of 58.014 MPa was also captured under the same working conditions. Results are elaborately discussed in the paper.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. ASM Handbook, Volume 2: Properties and Selection: Nonferrous Alloys and Special Purpose Materials ASM Handbook Committee, p 897–902.
2. Saburi · 1998 · 49
3. Honma · 1987 · 61
4. Characterization of a nanocrystalline NiTiHf high temperature shape memory alloy thin film10.1016/j.scriptamat.2005.01.030 ↗
5. Effect of plastic deformation of V nanowires on the transformation characteristics of NiTiV alloys10.1016/j.msea.2018.08.041 ↗
6. A study of NiTiV ternary shape memory alloys10.1016/S0925-8388(98)00937-2 ↗
7. Elastocaloric effect in polycrystalline Ni50 Ti45.3 V4.7 shape memory alloy10.1016/j.scriptamat.2017.09.048 ↗
8. Prediction of flow stress of annealed 7075 Al alloy in hot deformation using strain-compensated arrhenius and neural network models10.3390/ma14205986 ↗
9. Hot deformation behavior and 3D processing maps of AA7020 aluminium alloy10.1016/j.jallcom.2020.156113 ↗
10. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
11. Dynamic behavior and modified artificial neural network model for predicting flow stress during hot deformation of Alloy 925
12. Research on hot deformation behavior of Zr-4 alloy based on PSO-BP artificial neural network10.1016/j.jallcom.2020.154047 ↗
13. A comparison study of constitutive equation, neural networks and support vector regression for modeling hot deformation of 316L stainless steel10.3390/ma13173766 ↗
14. Hot deformation behavior of a CuAlMn shape memory alloy10.1016/j.jallcom.2020.156161 ↗
15. Hot deformation and dynamic recrystallization of NiTi intermetallic compound10.1016/j.jallcom.2014.06.063 ↗
16. Dynamic Recovery and dynamic recrystallization of NiTi shape memory alloy under hot compression deformation10.1016/S1003-6326(13)62440-1 ↗
17. Deformation behavior of TiNiFe alloy in isothermal compression10.1007/s12598-012-0513-8 ↗
18. Effect of ternary additions of Cu and Fe on the hot deformation behavior of NiTi shape memory alloy – A study using processing maps10.1016/j.intermet.2021.107084 ↗
19. Hot workability of a NiTiCu shape memory alloy with acicular martensite phase based on processing maps10.1016/j.intermet.2017.03.013 ↗
20. Effect of Cu addition on the hot deformation behavior of NiTi shape memory alloys10.1016/j.jallcom.2010.01.124 ↗
21. Processing map of NiTiNb shape memory alloy subjected to plastic deformation at high temperatures10.3390/met7090328 ↗
22. High quality vacuum induction melting of small quantities of NiTi shape memory alloys in graphite crucibles10.1016/j.jallcom.2004.05.002 ↗
23. Flow curve analysis of 17-4 PH stainless steel under hot deformation test10.1007/s11661-009-0029-5 ↗
24. Microstructural evolution during the hot deformation of Ti-55Ni (at. pct) intermetallic alloy10.1007/s11661-010-0338-8 ↗
25. Constitutive relationships for hot deformation of austenite10.1016/j.actamat.2011.07.008 ↗
26. Variation of activation energy determined by a modified Arrhenius approach: Roles of dynamic recrystallization on the hot deformation of Ni-based superalloy10.1016/j.jmst.2020.09.024 ↗
27. Deformation behavior and processing maps of Ni3Al-based superalloy during isothermal hot compression10.1016/j.jallcom.2017.04.116 ↗
28. A study on the hot workability of wrought NiTi shape memory alloy10.1016/j.msea.2011.04.036 ↗
29. A study on the mechanical behaviour and microstructure of NiTiHf shape memory alloy under hot deformation10.1016/j.msea.2012.09.039 ↗
30. Deformation behavior and microstructure evolution of NiTiCu shape memory alloy subjected to plastic deformation at high temperatures10.3390/met7080294 ↗
31. Deformation behavior TiNiFe alloy in isothermal compression10.1007/s12598-012-0513-8 ↗
32. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
33. Processing maps: a status report10.1361/105994903322692420 ↗
34. Prasad · 1997
35. Zeigler · 1963 · 63
36. Dynamic recrystallization kinetics10.1179/msc.1979.13.3-4.195 ↗
37. Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloy10.1007/s10853-015-9200-0 ↗
38. Initiation of dynamic recrystallization in constant strain rate hot deformation10.2355/isijinternational.43.684 ↗