Effects of elemental segregation and scanning strategy on the mechanical properties and hot cracking of a selective laser melted FeCoCrNiMn-(N,Si) high entropy alloy
Source abstract
Abstract
Abstract The effects of scanning rotation, elements N and Si additions on the grain size distribution, elemental segregations, mechanical properties and hot cracking behaviors of a FeCoCrNiMn high entropy alloy fabricated by selective laser melting were systematically investigated. The alloy fabricated by 45° scanning rotation strategy has a higher hot crack density than by 67° scanning rotation strategy, due to the prevailing epitaxial growth of the columnar dendrites and withstanding high local strain and low strength. The additions of N and Si elements promote the preferred segregations of Mn and Ni elements, which facilitates the initiation and propagation of the intergranular hot cracks. The investigation also illustrates that the additions of N and Si elements can form a hierarchical structure, including elemental segregations, dislocation cell, nanotwins, fine precipitates and multimodal grain structure, which effectively improve the mechanical properties. The investigation indicates that in order to prepare a crack-free alloy, the processing parameters and alloy composition should be carefully tailored to reduce the epitaxial growth of dendrites, and to avoid the elemental segregation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. High-entropy alloys10.1038/s41578-019-0121-4 ↗
2. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
3. Functional properties and promising applications of high entropy alloys10.1016/j.scriptamat.2020.06.017 ↗
4. Microstructural and mechanical behavior of a CoCrFeNiCu4 non-equiatomic high entropy alloy
5. The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermo-mechanically treated Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys10.1016/j.actamat.2016.12.074 ↗
6. Nitrogen induced heterogeneous structures overcome strength-ductility trade-off in an additively manufactured high-entropy alloy
7. Boron doped ultrastrong and ductile high-entropy alloys10.1016/j.actamat.2018.04.004 ↗
8. CALPHAD aided design of high entropy alloy to achieve high strength via precipitate strengthening10.1007/s40843-019-1170-7 ↗
9. Effect of thermomechanical processing on microstructure and mechanical properties of the carbon-containing CoCrFeNiMn high entropy alloy10.1016/j.jallcom.2016.09.208 ↗
10. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
11. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
12. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
13. An investigation of the microstructural evolution and tensile properties of a nickel-based GH648 superalloy manufactured through selective laser melting10.1016/j.msea.2020.139704 ↗
14. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting10.1016/j.scriptamat.2018.05.015 ↗
15. A Si-containing FeCoCrNi high-entropy alloy with high strength and ductility synthesized in situ via selective laser melting
16. Tailored microstructures and strengthening mechanisms in an additively manufactured dual-phase high-entropy alloy via selective laser melting10.1007/s40843-020-1291-9 ↗
17. Selective laser melting enabling the hierarchically heterogeneous microstructure and excellent mechanical properties in an interstitial solute strengthened high entropy alloy10.1080/21663831.2019.1650131 ↗
18. Superior tensile properties of 1%C-CoCrFeMnNi high-entropy alloy additively manufactured by selective laser melting
19. The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 71810.1016/j.jallcom.2010.11.176 ↗
20. Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites10.1016/j.jallcom.2017.08.022 ↗
21. Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)10.1016/j.msea.2014.10.003 ↗
22. Stress and deformation evaluations of scanning strategy effect in selective laser melting
23. Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder10.1016/j.matdes.2014.07.006 ↗
24. Effect of minor alloying elements on crack-formation characteristics of Hastelloy-X manufactured by selective laser melting
25. Misorientation-dependent solute enrichment at interfaces and its contribution to defect formation mechanisms during laser additive manufacturing of superalloys
26. The formation of eutectic phases and hot cracks in one Ni–Mo–Cr superalloy10.1016/j.matdes.2015.12.152 ↗
27. Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron beam melting10.1016/j.actamat.2017.09.047 ↗
28. The initiation and propagation mechanism of the overlapping zone cracking during laser solid forming of IN-738LC superalloy10.1016/j.jallcom.2018.03.366 ↗
29. Revealing hot tearing mechanism for an additively manufactured high-entropy alloy via selective laser melting10.1016/j.scriptamat.2019.04.036 ↗
30. A fracture-resistant high-entropy__alloy for cryogenic applications10.1126/science.1254581 ↗
31. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: processability, non-equilibrium microstructure and mechanical property10.1016/j.jallcom.2018.02.298 ↗
32. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts10.1016/j.matdes.2016.03.111 ↗
33. Crystallographic-orientation-dependent tensile behaviours of stainless steel 316L fabricated by laser powder bed fusion10.1016/j.msea.2019.138395 ↗
34. Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles10.1016/j.matdes.2015.10.027 ↗
35. Microstructures and mechanical properties of C-containing FeCoCrNi high-entropy alloy fabricated by selective laser melting10.1016/j.intermet.2018.01.002 ↗
36. Textures formed in a CoCrMo alloy by selective laser melting10.1016/j.jallcom.2015.01.096 ↗
37. Modulated structures of Fe–10Mn–2Cr–1.5C alloy10.1016/S0261-3069(02)00072-9 ↗
38. Effects of process parameters on microstructures and tensile properties of laser melting deposited CrMnFeCoNi high entropy alloys10.1016/j.msea.2018.11.110 ↗
39. Effects of annealing on the microstructural evolution and phase transition in an AlCrCuFeNi2 high-entropy alloy10.1016/j.micron.2017.06.007 ↗
40. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
41. Solidification and liquation cracking issues in welding10.1007/s11837-003-0137-4 ↗
42. Hot tearing of nickel-based superalloys during directional solidification10.1016/S1359-6454(02)00042-3 ↗
43. Last-stage solidification of alloys: theoretical model of dendrite-arm and grain coalescence10.1007/s11661-003-0083-3 ↗
44. Cracking behavior and control of Rene 104 superalloy produced by direct laser fabrication10.1016/j.jmatprotec.2015.06.002 ↗
45. Grain boundary decohesion by nanoclustering Ni and Cr separately in CrMnFeCoNi high-entropy alloys
46. Interfacial segregation and grain boundary embrittlement: an overview and critical assessment of experimental data and calculated results10.1016/j.pmatsci.2016.11.001 ↗
47. Influence of texture on Hall–Petch relationships in an Mg alloy10.1016/j.actamat.2014.08.023 ↗
48. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
49. Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗
50. Influences of nitrogen alloying on microstructural evolution and tensile properties of CoCrFeMnNi high-entropy alloy treated by cold-rolling and subsequent annealing10.1016/j.msea.2020.139472 ↗
51. Microstructure and enhanced strength of laser aided additive manufactured CoCrFeNiMn high entropy alloy10.1016/j.msea.2018.12.005 ↗
52. Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: effect of heat treatment on microstructure, residual stress and mechanical property10.1016/j.jallcom.2019.01.213 ↗
53. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗