Mechanism of in situ synthesis of TiC in Cu melts and its microstructures
Source abstract
Abstract
Abstract In this work, in situ TiC particles reinforced Cu matrix composites were fabricated by melting-casting method. The synthesized mechanism of TiC in Cu melts and microstructures of prepared composites were investigated. It is found that TiC are synthesized in Cu–Ti melts by the reaction of graphite and soluble Ti. After adding graphite into Cu–Ti melts, Ti will firstly react with graphite on the surface to form small TiC nucleus and then the TiC will further grow by the continuous diffusion of Ti. During the formation process, most of the prepared TiC particles will be separated with graphite and incorporated into the melts. Once TiC particles into melts, they will hardly grow further due to the lack of C element in Cu melts. Since TiC particles will be separated with graphite at different growth stage, TiC with a wide range of size and various morphologies can be obtained. At the same time, some TiC particle may never be broken with the graphite and will grow into different agglomerations or integrate into larger plate-like TiC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. In-situ fabrication and characterization of ultrafine structured Cu–TiC composites with high strength and high conductivity by mechanical milling10.1016/j.jallcom.2015.10.061 ↗
2. Microstructure, properties and wear behaviors of (Ni3Al)p reinforced Cu matrix composites10.1016/S1005-0302(11)60167-9 ↗
3. Effect of Cr content on the compression properties and abrasive wear behavior of the high-volume fraction (TiC–TiB2)/Cu composites10.1007/s40195-014-0158-8 ↗
4. The Cu matrix cermets remarkably strengthened by TiB2 “in situ” synthesized via self-propagating high temperature synthesis10.1016/j.matdes.2013.07.092 ↗
5. Relationship between microstructure, properties and reaction conditions for Cu–TiB2 alloys prepared by in situ reaction10.1016/j.actamat.2009.06.030 ↗
6. In situ production of tantalum carbide nanodispersoids in a copper matrix by reactive milling and hot extrusion10.1016/j.jallcom.2014.01.191 ↗
7. Strengthening in rapidly solidified age hardened Cu–Cr and Cu–Cr–Zr alloys10.1016/S1359-6454(96)00142-5 ↗
8. Microstructure, mechanical properties, electrical conductivity and wear behavior of high volume TiC reinforced Cu-matrix composites10.1016/j.matchar.2008.09.014 ↗
9. Effect of La addition on the particle characteristics, mechanical and electrical properties of in situ Cu–TiB2 composites10.1016/j.jallcom.2016.06.129 ↗
10. In-situ combustion synthesis of ultrafine TiB2 particles reinforced Cu matrix composite10.1023/B:JMSC.0000034171.47412.7f ↗
11. Synthesis of Ni–TiC composite powder electrochemically in molten chlorides10.1016/j.jallcom.2016.08.101 ↗
12. Cast in situ Cu–TiC composites: synthesis by SHS route and characterization10.1016/j.msea.2008.10.002 ↗
13. Reaction synthesis of Cu–TiCx master-alloys for the production of copper-based composites10.1016/j.scriptamat.2004.01.007 ↗
14. In-situ formation of copper matrix composites by laser sintering10.1016/S0921-5093(02)00050-3 ↗
15. Fabrication and simultaneous bonding of metal matrix composite by combustion synthesis reaction10.1016/j.scriptamat.2003.11.056 ↗
16. Carbide stoichiometry in TiCx and Cu–TiCx produced by self-propagating high-temperature synthesis10.1016/S1359-6462(01)01205-2 ↗
17. Microstructure of Cu–C interface in Cu-based metal matrix composite10.1016/S0924-4247(98)00307-0 ↗
18. Wetting of titanium nitride and titanium carbide by liquid metals10.1016/1359-6454(95)00165-0 ↗
19. The solubility of carbon in solid gold, copper, and silver10.1016/0036-9748(69)90262-2 ↗
20. 1990 · vol. 1 · 839
21. Evolution process of the synthesis of TiC in the Cu–Ti–C system10.1016/j.jallcom.2006.11.024 ↗
22. Thermodynamic assessment of the Cu–Ti–Zr system10.1016/S0925-8388(02)01035-6 ↗
23. Wetting of TiC by non-reactive liquid metals10.1016/S1359-6454(01)00349-4 ↗