Enhancement of thermal stability of Nd–Fe–B sintered magnets with tuned Tb-diffused microstructures via temperature control
Source abstract
Abstract
Abstract We investigate the magnetic properties and thermal stability of Tb-diffused Nd–Fe–B magnets prepared at various grain-boundary diffusion temperatures and additional heat-treatment temperatures. These heat-treatment processes improved the coercivity of Tb-diffused Nd–Fe–B magnets than that of the base magnets. The diffusion temperature was found to play a key role in controlling the magnetic thermal stability; temperature variations induced precise changes in the decoupled Tb-diffused microstructures in the magnets. The magnet fabricated at a high diffusion temperature showed the best coercivity at room temperature but poor thermal stability. This was due to the formation of Tb-rich (Tb, Nd)2Fe14B phases with high magnetocrystalline anisotropy produced inside the grains and less core–shell structures during diffusion at a higher temperature. The best thermal stability was observed for the magnet prepared at a lower diffusion temperature. This magnet had more well-formed core–shell structures than the remaining magnets. By analyzing its microstructure, using electron microscopy and a micromagnetic equation, it was found that a decoupled microstructure with diffused Tb atoms was mainly responsible for the better thermal magnetic stability. Results obtained herein suggest that an optimized diffusion temperature can provide a magnet with good thermal stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnetic properties of thin films · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
2. Emadi · 2005
3. Coercivity and its thermal stability of NdFeB hot-deformed magnets enhanced by the eutectic grain boundary diffusion process10.1016/j.actamat.2018.09.018 ↗
4. Investigation of the wettability and the interface feature of the melted Nd70Cu30 alloy on the surface of a sintered Nd-Fe-B magnet10.1016/j.scriptamat.2018.08.014 ↗
5. The mechanism of coercivity enhancement by the grain boundary diffusion process of Nd–Fe–B sintered magnets10.1016/j.actamat.2012.12.018 ↗
6. High-coercivity ultrafine-grained anisotropic Nd–Fe–B magnets processed by hot deformation and the Nd–Cu grain boundary diffusion process10.1016/j.actamat.2013.07.049 ↗
7. Cullity · 2009 · vol. 11
8. Influence of Nb, Mo, and Ti as doping metals on structure and magnetic response in NdFeB based melt spun ribbons10.1016/j.jmmm.2018.05.004 ↗
9. Investigations of the corrosion behaviour of nanocrystalline Nd–Fe–B hot pressed magnets10.1016/S0925-8388(00)01112-9 ↗
10. Production for high thermal stability NdFeB magnets10.1016/j.jmmm.2007.11.022 ↗
11. Improved magnetic properties and thermal stabilities of Pr-Nd-Fe-B sintered magnets by Hf addition10.1063/1.5006088 ↗
12. Magnetic properties of bulk, and rapidly solidified nanostructured (Nd1-xCex)2Fe14-yCoyB ribbons10.1016/j.actamat.2015.09.049 ↗
13. Effect of Nb substitution on the temperature characteristics and microstructures of rapid-quenched NdFeB alloy10.1016/j.jallcom.2006.03.034 ↗
14. Improvement of the thermal stability of sintered Nd-Fe-B magnets by intergranular addition of Dy82.3Co17.710.1063/1.4868491 ↗
15. The gradient change of microstructures and the diffusion principle after grain boundary diffusion process10.3390/ma12233881 ↗
16. Effect of oxygen, carbon, and nitrogen contents on the corrosion resistance of Nd-Fe-B magnets10.1109/20.104576 ↗
17. Properties improvement and structural optimization of sintered NdFeB magnets by non-rare earth compound grain boundary diffusion10.1016/j.matdes.2015.07.067 ↗
18. On the squareness factor behavior of RE-FeB (RE = Nd or Pr) magnets above room temperature10.1109/TMAG.2009.2025190 ↗
19. Maximizing loop squareness by minimizing gradients in the microstructure10.1063/1.369915 ↗
20. Magnetic behavior of sintered NdFeB magnets on a long-term timescale
21. Microstructural parameters in high-remanent sintered NdFeB magnets10.1002/(SICI)1521-396X(199902)171:2<583::AID-PSSA583>3.0.CO;2-C ↗
22. Magnetic and microstructural properties of nanocrystalline exchange coupled PrFeB permanent magnets10.1016/S0304-8853(98)00030-4 ↗
23. Microstructure and improved properties of sintered Nd-Fe-B magnets by grain boundary diffusion of non-rare earth10.1016/j.jmmm.2018.12.048 ↗
24. Microstructure and improved properties of sintered Nd-Fe-B magnets by grain boundary diffusion of non-rare earth10.1016/0304-8853(87)90097-7 ↗
25. Grain size dependence of coercivity of hot-deformed Nd–Fe–B anisotropic magnets10.1016/j.actamat.2014.09.021 ↗