journal article·2019-11

Enhanced mechanical properties and near unity yield asymmetry in equiatomic high entropy alloy particles reinforced magnesium composites

Khin Sandar Tun, Manoj Gupta

Publisher page

Abstract

Abstract This work presents the use of equiatomic high entropy alloy (HEA) particles as unconventional reinforcement phase in Mg matrix. Mg-HEA composites were fabricated by powder metallurgy method incorporating microwave sintering and hot extrusion. Recrystallized fine grains (∼50% reduction) were observed in all the composites due to the capability of HEA particles to serve as nucleation sites and for grain boundary pinning following extrusion. Grain refinement coupled with intrinsic high hardness of HEA particles led to an improvement in hardness of 47%, 51% and 54% in Mg-2.5 wt% HEA, Mg-5 wt.% HEA and Mg-7.5 wt% HEA composites, respectively. In comparison with traditional micron size reinforced composites, Mg-HEA composites displayed superior hardness improvement. In addition, HEA reinforcement particles also enhanced both tensile and compressive strengths of magnesium with marginally compromised tensile ductility and marginally enhanced compressive ductility. Relatively strong fiber texture of extruded pure Mg was weakened in the composites due to the presence of HEA particles effectively reducing the yield asymmetry to near unity in Mg-5 wt.% HEA and Mg-7.5 wt% HEA composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Magnesium: properties — applications — potential10.1016/S0921-5093(00)01351-4 ↗
2. Gupta · 2011
3. Review of recent studies in magnesium matrix composites10.1023/B:JMSC.0000043583.47148.31 ↗
4. Magnesium-based nanocomposites: lightweight materials of the future10.1016/j.matchar.2015.04.015 ↗
5. Bulk metallic glasses10.1016/j.mser.2004.03.001 ↗
6. Light weight high entropy alloys: processing challenges and properties10.2174/1874464811666180327121606 ↗
7. An insight into evolution of light weight high entropy alloys: a review10.3390/met6090199 ↗
8. A light-weight high-entropy alloy Al20Be20Fe10Si15Ti3510.1007/s11431-017-9073-0 ↗
9. Synthesis of light weight high entropy alloys: characterization of microstructure and mechanical response
10. Enhancing the hardness and compressive response of magnesium using complex composition alloy reinforcement10.3390/met8040276 ↗
11. Processing-microstructure-mechanical properties of an Al-Cu/SiC metal matrix composite synthesized using disintegrated melt deposition technique10.1016/0025-5408(95)00141-7 ↗
12. Mechanical characterization of cryomilled Al powder consolidated by high-frequency induction heat sintering
13. Effect of bimodal size SiC particulates on microstructure and mechanical properties of AZ31B magnesium matrix composites10.1016/j.matdes.2013.05.067 ↗
14. Tensile-compressive yield asymmetries in high strength wrought magnesium alloys10.1016/0956-716X(94)90159-7 ↗
15. Dynamic recrystallization behavior of particle reinforced Mg matrix composites fabricated by stir casting10.1016/j.msea.2012.02.077 ↗
16. Microstructure and tensile properties of ECAPed Mg-9Al-1Si-1SiC composites: the influence of initial microstructures10.3390/ma11010136 ↗
17. Dynamic recrystallization in a thermomechanically processed metal matrix composite10.1016/0921-5093(94)09753-4 ↗
18. Effect of volume fraction and particle size on the microstructure and plastic deformation of Mg–Y2O3 composites10.1016/j.msea.2006.01.026 ↗
19. Effect of the extrusion texture on the mechanical behaviour of Mg–SiCp composites10.1016/j.scriptamat.2004.11.024 ↗
20. Effect of submicron size SiC particulates on microstructure and mechanical properties of AZ91 magnesium matrix composites10.1016/j.jallcom.2010.05.159 ↗
21. Development of high performance magnesium composites using Ni50Ti50 metallic glass reinforcement and microwave sintering approach10.1016/j.jallcom.2014.12.009 ↗
22. Strengthening mechanisms in particulate metal matrix composites10.1016/0956-716X(91)90349-6 ↗
23. Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites10.1016/j.msea.2006.10.184 ↗
24. Jayalakshmi · 2015
25. Influence of SiC particles on compressive deformation of magnesium matrix composites10.1016/j.msea.2011.10.103 ↗
26. Compressive deformation behavior of Mg and Mg/(Y2O3+ Ni) nanocomposites10.1016/j.msea.2010.05.025 ↗
27. Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn10.1016/j.actamat.2004.07.015 ↗