journal article·2023-12

Microstructure and mechanical properties of in-situ Ti5Si3/TC4 composites via spark plasma sintering and hot rolling

Chongyang Tao, Lanyun Li, Ni He, Guodong Sun, Chengze Liu, Junjie Xu, Mingyang Li, Longlong Dong, Yusheng Zhang, Lianwen Wang, Mingjia Li

Publisher page

Abstract

In this study, low energy ball milling and spark plasma sintering techniques prepared the in-situ synthesized Ti 5Si 3 reinforced Ti-6Al-4V (TC4) matrix composites and then rolled them at high temperatures. In the composites with high Si content, the Ti 5Si 3 particles distributed at the interface of α-phase and β-phase agglomerated and then formed a quasi-continuous network structure, which will deteriorate the plasticity of the composites. After hot rolling, the grains of the composite were significantly refined, and more Ti 5Si 3 particles were precipitated. With the increase in Si content, the tensile strength of sintered composites increased slightly, but the elongation decreased greatly. After hot rolling, the tensile strength of the composite increased significantly with an increment of 359.4 MPa, among which the composite with 0.6 wt% Si achieved a synchronous increase in strength and plasticity. The strengthening mechanism of sintered composites included dislocation strengthening, solution strengthening, and grain refinement, among which dislocation strengthening and grain refinement were the main strengthening mechanisms. The strengthening mechanism of rolled composites was mainly the dislocation strengthening caused by rolling, the grain refinement, and the mismatch of thermal expansion coefficient.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Microstructure characteristics and enhanced properties of network-structured TiB/(TA15-Si) composites via rolling deformation at different temperatures10.1016/j.msea.2021.142176 ↗
2. High temperature deformation behavior of melt hydrogenated (TiB + TiC)/Ti-6Al-4V composites10.1016/j.matdes.2017.02.075 ↗
3. Spark plasma forging and network size effect on strength-ductility trade-off in graphene reinforced Ti6Al4V matrix nanocomposites10.1016/j.msea.2022.144480 ↗
4. Interface configuration effect on mechanical and tribological properties of three-dimension network architectural titanium alloy matrix nanocomposites10.1016/j.compositesa.2022.106981 ↗
5. Strength-ductility synergy of in-situ TiB/Ti6Al4V composites with tailored hierarchical TiB distributions10.1016/j.ceramint.2022.08.096 ↗
6. Insight into the formation mechanism and interaction of matrix/TiB whisker textures and their synergistic effect on property anisotropy in titanium matrix composites10.1016/j.jmst.2021.08.033 ↗
7. The influences of trace TiB and TiC on microstructure refinement and mechanical properties of in situ synthesized Ti matrix composite10.1016/j.compositesb.2012.01.075 ↗
8. Properties and deformation behaviour of Mg–Y2O3 nanocomposites10.1016/j.actamat.2007.05.032 ↗
9. Carbonaceous nanomaterial reinforced Ti-6Al-4V matrix composites: Properties, interfacial structures and strengthening mechanisms10.1016/j.carbon.2020.04.009 ↗
10. Advanced tensile properties and strain rate sensitivity of titanium matrix composites reinforced with CaTiO3 particles10.1016/j.jallcom.2021.163229 ↗
11. Microstructure and mechanical properties of in situ TiC/Ti composites with a laminated structure synthesized by spark plasma sintering10.1016/j.msea.2021.141136 ↗
12. Mechanical property and microstructure of in-situ TiB/Ti composites via vacuum sintering and hot rolling10.1016/j.jallcom.2022.165042 ↗
13. Microstructure and mechanical properties of GNPs and in-situ TiB hybrid reinforced Ti–6Al–4V matrix composites with 3D network architecture10.1016/j.msea.2022.143536 ↗
14. In-situ synthesis and superhigh modulus of network structured TiC/Ti composites based on diamond-Ti system10.1016/j.jallcom.2020.155248 ↗
15. Tensile and bending behaviors and characteristics of laminated Ti-(TiBw/Ti) composites with different interface status10.1016/j.compositesb.2016.10.001 ↗
16. Achieving high performance in (NiTi2 + TiC)/Ti composites with network architecture via reaction interface design10.1016/j.jallcom.2022.166230 ↗
17. Duplex strengthening via SiC addition and in-situ precipitation in additively manufactured composite materials10.1016/j.compositesb.2022.109820 ↗
18. Visual assessment of special rod-like α-Ti precipitates within the in situ TiC crystals and the mechanical responses of titanium matrix composites10.1016/j.compositesb.2021.109511 ↗
19. High temperature tensile fracture characteristics of the oriented TiB whisker reinforced TA15 matrix composites fabricated by pre-sintering and canned extrusion10.1016/j.jallcom.2017.12.132 ↗
20. Effects of Ti5Si3 characteristics adjustment on microstructure and tensile properties of in-situ (Ti5Si3+TiBw)/Ti6Al4V composites with two-scale network architecture10.1016/j.msea.2016.07.112 ↗
21. Nano-scaled Ti5Si3 evolution and Strength Enhancement of titanium matrix composites with two-scale architecture via heat treatment10.1016/j.msea.2017.06.067 ↗
22. Effects of first-scale TiBw on secondary-scale Ti5Si3 characteristics and mechanical properties of in-situ (Ti5Si3+TiBw)/Ti6Al4V composites10.1016/j.jallcom.2017.02.044 ↗
23. Microstructure, mechanical properties and strengthening mechanisms of in-situ prepared (Ti5Si3 + TiC0.67)/TC4 composites10.1016/j.jallcom.2019.04.056 ↗
24. Microstructure evolution mechanisms and strength improvement of (6.5 vol% TiC + 3.3 vol% Ti5Si3)/Ti6Al4V composites via heat treatments10.1016/j.msea.2020.140581 ↗
25. Fabrication and mechanical properties of the titanium matrix composites based on Ti6Al4V-ZrB2-(Si) system10.1016/j.msea.2021.141488 ↗
26. Effect of multi-directional forging on the microstructure and mechanical properties of TiBw/TA15 composite with network architecture10.1016/j.matdes.2017.08.055 ↗
27. Evolution of microstructure and mechanical properties of Ti/TiB metal-matrix composite during isothermal multiaxial forging10.1016/j.jallcom.2018.08.215 ↗
28. The effect of heat treatment on α/ β phases evolution of TC4 titanium alloy fabricated by spark plasma sintering10.1016/j.promfg.2020.08.128 ↗
29. Ultrafine duplex microstructure and excellent mechanical properties of TC4 alloy via a novel thermo-mechanical treatment10.1016/j.jallcom.2018.07.141 ↗
30. Microstructure and tensile properties of a multi-alloyed α + β titanium alloy Ti4.5Al10.5V3Fe10.1016/j.matchemphys.2022.127110 ↗
31. Microstructure evolution, mechanical properties and high temperature deformation of (TiB + TiC)/Ti–3.5Al–5Mo–6V–3Cr–2Sn–0.5Fe titanium alloy10.1016/j.matchar.2021.111616 ↗
32. Microstructure evolution, mechanical properties and strengthening mechanism of titanium matrix composite sheets10.1016/j.msea.2022.144256 ↗
33. Microstructure evolution and tensile properties of as-rolled TiB/TA15 composites with network microstructure10.1016/j.msea.2021.140783 ↗
34. Effects of rolling deformation on microstructure orientations and tensile properties of TiB/(TA15-Si) composites10.1016/j.matchar.2022.112425 ↗
35. Structure and mechanical properties of in-situ titanium matrix composites with homogeneous Ti5Si3 equiaxial particle-reinforcements10.1016/j.msea.2017.05.043 ↗
36. The sintering, sintered microstructure and mechanical properties of Ti-Fe-Si alloys10.1007/s11661-012-1272-8 ↗
37. On the peritectoid Ti3Si formation in Ti–Si alloys10.1016/j.matchar.2005.09.009 ↗
38. Reactions between Ti and Ti3SiC2 in temperature range of 1273–1573 K10.1016/S1003-6326(07)60007-7 ↗
39. Microstructural stability on aging of an α + β titanium alloy: Ti- 6Al- 1.6Zr-3.3Mo- 0.30Si10.1007/BF02649855 ↗
40. Precipitation of Ti5Si3 phase in TiAl alloys10.1016/S0921-5093(01)01678-1 ↗
41. Microstructure and mechanical properties of P/M titanium matrix composites reinforced by in-situ synthesized10.1016/j.msea.2015.01.033 ↗
42. Microstructure and mechanical properties of SiC nanowires reinforced titanium matrix composites10.1016/j.jallcom.2019.152953 ↗
43. Improving the strengthening efficiency of carbon nanotubes in titanium metal matrix composites10.1016/j.msea.2017.04.026 ↗
44. Tensile property enhancement by oxygen solutes in selectively laser melted titanium materials fabricated from pre-mixed pure Ti and TiO2 powder10.1016/j.msea.2020.139983 ↗
45. Study on rolling of a new near-α titanium alloy: Microstructure refinement and dual-scale silicides evolution10.1016/j.jallcom.2020.156867 ↗
46. Effects of direct rolling deformation on the microstructure and tensile properties of the 2.5 vol% (TiBw +TiCp)/Ti composites10.1016/j.msea.2016.12.113 ↗
47. Effect of ball milling time on microstructure and mechanical properties of graphene nanoplates and TiBw reinforced Ti–6Al–4V alloy composites10.1016/j.msea.2022.144240 ↗
48. Microstructure and properties of TiCx/TC4 composites with a quasi-network structure prepared by the decomposition of the Ti2AlC precursor10.1016/j.jallcom.2022.166011 ↗
49. Investigation on the microstructure, room and high temperature mechanical behaviors and strengthening mechanisms of the (TiB+TiC)/TC4 composites10.1016/j.jallcom.2017.08.017 ↗
50. Strengthening and plasticity improvement mechanisms of titanium matrix composites with two-scale network microstructure10.1016/j.powtec.2019.09.008 ↗
51. Facile manipulation of mechanical properties of Ti-6Al-4V through composition tailoring in laser powder bed fusion10.1016/j.jallcom.2023.169022 ↗
52. High-performance Ti composites reinforced with in-situ TiC derived from pyrolysis of polycarbosilane10.1016/j.msea.2020.139924 ↗
53. In-situ TiB/Ti-6Al-4V composites with a tailored architecture produced by hot isostatic pressing: microstructure evolution, enhanced tensile properties and strengthening mechanisms10.1016/j.compositesb.2019.01.080 ↗
54. Achieving well-balanced strength and ductility in GNFs/Ti composite via laminated architecture design10.1016/j.carbon.2021.11.049 ↗
55. The dislocation behaviour and GND development in a nickel based superalloy during creep10.1016/j.ijplas.2019.02.015 ↗
56. Effect of high-pressure torsion on structure and properties of Ti-15Mo/TiB metal-matrix composite10.3390/ma11122426 ↗