Industrial-scale fabrication of FeSiCr magnetic powder cores with high magnetic permeability and low loss
Source abstract
Abstract
FeSiCr magnetic powders is the key raw material for inductive components such as molding choke and power factor correction (PFC) inductors. In this paper, the industrial-scale insulation coating process of high-performance FeSiCr soft magnetic powder cores (SMPCs) were studied by using mature and environmentally friendly silica sol (SiO 2 ), aluminum dihydrogen phosphate solution (AHP), glass powders (GP), and phosphoric acid (PA) as insulators and water-soluble sodium silicate (NSO) as an inorganic binder, respectively. A comprehensive analysis of the SEM, EDS, and XPS results showed that the surface insulation layer uniformity of the four coating powders is poor due to the irregular morphology of the FeSiCr powder, with the glass powder having the worst coating uniformity due to partial agglomeration occurring in mechanical mixing. The four coated powders all had high saturation magnetization (173.1–176.5 emu∙g −1 ), in which the chemical reaction of FeSiCr in the phosphoric acid coating process consumed Fe atoms, resulting in the lowest M s of the powders in the several coating processes. At the corresponding optimum heat treatment temperature, the FeSiCr@SiO 2 @NSO SMPCs had the highest permeability of 96.1, while the FeSiCr@PA@NSO SMPCs had the lowest at 75.5, due to the phosphoric acid consuming part of the ferromagnetic material and the loose porous structure of the phosphate layer further reducing the density of SMPCs. The total losses of the four powder cores are low (228.9–259.2 mW·cm −3 , 100 Gs, 1000 kHz), while loss separation and experiments with different pressing tonnages showed that the eddy current losses of SMPCs was higher than the hysteresis losses, which was caused by the irregular morphology of FeSiCr powders. The FeSiCr@SiO 2 @NSO SMPCs exhibit optimum corrosion resistance due to the uniform coating of the SiO 2 nano-insulating layer on the powders surface as a result of the strong bonding of the silica sol with FeSiCr. As can be seen, FeSiCr@SiO 2 @NSO SMPCs prepared using silica sols have very high saturation magnetization, very high permeability, low core loss, and good corrosion resistance compared to the other three insulation processes and can be industrially produced on a large scale, offering great application prospects in the field of high current and high frequency.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties and Applications · Magnetic Properties of Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Soft magnetic materials for a sustainable and electrified world10.1126/science.aao0195 ↗
2. Past, present, and future of soft magnetic composites10.1063/1.5027045 ↗
3. High density Fe-based soft magnetic composites with nice magnetic properties prepared by warm compaction10.1016/j.jallcom.2023.169460 ↗
4. Study of bulk amorphous and nanocrystalline alloys fabricated by high-sphericity Fe84Si7B5C2Cr2 amorphous powders at different Spark-Plasma-Sintering temperatures10.3390/ma15031106 ↗
5. Synthesis of well-insulated Fe-Si-Al soft magnetic composites via a silane-assisted organic/inorganic composites coating route10.1016/j.jpcs.2020.109841 ↗
6. FeSiBCrC amorphous magnetic powder fabricated by gas-water combined atomization10.1016/j.jallcom.2020.157991 ↗
7. Magnetic properties of selected Fe-based soft magnetic composites interpreted in terms of Jiles-Atherton model parameters10.1016/j.jmmm.2020.166514 ↗
8. Magnetic properties of iron-based soft magnetic composites prepared via phytic acid surface treatment10.1016/j.ceramint.2020.11.245 ↗
9. magnetic composite materials (SMCs)10.1016/j.jmatprotec.2007.02.034 ↗
10. Novel Fe-based nanocrystalline powder cores with excellent magnetic properties produced using gas-atomized powder10.1016/j.jmmm.2017.12.049 ↗
11. Crystal-like microstructural Finemet/FeSi compound powder core with excellent soft magnetic properties and its loss separation analysis10.1016/j.matdes.2020.108769 ↗
12. Breakup process modeling and production of FeSiAl magnetic powders by close-coupled gas atomization10.1016/j.jmrt.2022.12.169 ↗
13. Effect of polyimide-phosphating double coating and annealing on the magnetic properties of Fe-Si-Cr SMCs10.3390/ma15093350 ↗
14. Enhanced high frequency properties of FeSiBPC amorphous soft magnetic powder cores with novel insulating layer10.1016/j.apt.2021.03.017 ↗
15. Enhanced magnetic properties of FeSiAl soft magnetic composites prepared by utilizing PSA as resin insulating layer10.3390/polym13091350 ↗
16. High permeability and low loss bioinspired soft magnetic composites with nacre-like structure for high frequency applications10.1016/j.actamat.2019.01.035 ↗
17. Facile synthesis of Fe-6.5 wt%Si/SiO2 soft magnetic composites as an efficient soft magnetic composite material at medium and high frequencies10.1016/j.jallcom.2018.01.307 ↗
18. Insulation layer design for soft magnetic composites by synthetically comparing their magnetic properties and coating process parameters10.1016/j.jmmm.2020.167496 ↗
19. Effect of heat treatment on magnetic properties of iron-based soft magnetic composites with Al2O3 insulation coating produced by sol–gel method10.1016/j.jallcom.2013.07.008 ↗
20. Microstructure and magnetic properties of FeSiCr soft magnetic powder cores with a MgO insulating layer prepared by the sol-gel method
21. High-performance core-shell-type FeSiCr@MnZn soft magnetic composites for high-frequency applications10.1016/j.jallcom.2020.158215 ↗
22. Magnetic properties and loss separation in FeSi/MnZnFe2O4 soft magnetic composites10.1016/j.jmmm.2016.03.051 ↗
23. Preparation and characterization of MnZn/FeSiAl soft magnetic composites10.1016/j.jmmm.2016.11.068 ↗
24. Low-loss and high-induction Fe-based soft magnetic composites coated with magnetic insulating layers10.1016/j.jmmm.2019.165651 ↗
25. Permeability dispersion and magnetic loss of Fe/NixZn1-xFe2O4 soft magnetic composites10.1109/TMAG.2012.2202271 ↗
26. Magnetic properties and loss separation mechanism of FeSi soft magnetic composites with in situ NiZn-ferrite10.1007/s10854-021-06551-9 ↗
27. Properties of FeSiAl-based soft magnetic composites with AlN/Al2O3 and hybrid phosphate–silane insulation coatings10.1016/j.jallcom.2017.11.312 ↗
28. Phosphate coatings evolution study and effects of ultrasonic on soft magnetic properties of FeSiAl by aqueous phosphoric acid solution passivation10.1016/j.jallcom.2018.12.328 ↗
29. Effects of processed parameters on the magnetic performance of a powder magnetic core10.1016/j.jmmm.2013.10.014 ↗
30. Evolution of phosphate coatings during high-temperature annealing and its influence on the Fe and FeSiAl soft magnetic composites10.1016/j.jallcom.2015.04.201 ↗
31. Low melting glass as adhesive and insulating agent for soft magnetic composites: case in FeSi powder core10.1016/j.jmmm.2020.166480 ↗
32. Effect of magnetic properties in FeSi soft magnetic composites by low melting glass powder as adhesive and insulating agent10.1007/s10854-021-07348-6 ↗
33. Fe-based amorphous magnetic powder cores with low core loss fabricated by novel gas–water combined atomization powders10.3390/ma15186296 ↗
34. Effects of axial pressure on the evolution of core–shell heterogeneous structures and magnetic properties of Fe–Si soft magnetic powder cores during hot-press sintering10.1039/D2RA02497G ↗
35. The percolation effect and optimization of soft magnetic properties of FeSiAl magnetic powder cores10.1016/j.jmmm.2017.03.016 ↗
36. Enhanced soft magnetic properties of Fe-based amorphous powder cores by longitude magnetic field annealing10.1016/j.jallcom.2017.02.202 ↗
37. Effects of annealing on the magnetic properties of Fe-based amorphous powder cores with inorganic-organic hybrid insulating layer10.1016/j.jmmm.2019.165827 ↗
38. Relationship between the microstructure and magnetic properties of Fe–Si–Cr powder cores10.1109/TMAG.2018.2792433 ↗
39. Preparation and characterization of flaky FeSiAl composite magnetic powder core coated with MnZn ferrite10.1016/j.cap.2019.05.003 ↗
40. Novel Fe-based nanocrystalline powder cores with excellent magnetic properties produced using gas-atomized powder10.1016/j.jmmm.2017.12.049 ↗
41. In situ synthesis of Fe3O4 coated on iron-based magnetic microwave absorbing materials and the influence of oxide magnetic materials on microwave absorption mechanism10.1016/j.ceramint.2022.12.170 ↗
42. Regulation of magnetic and electrical performances in core-shell-structured FeSiCr@ BaTiO3 soft magnetic composites10.1016/j.jallcom.2021.162724 ↗
43. Improved magnetic properties of FeSiCr amorphous soft magnetic composites by adding carbonyl iron powder10.1016/j.jnoncrysol.2021.120673 ↗
44. Improved high-frequency magnetic properties of FeSiBCCr amorphous soft magnetic composites by adding carbonyl iron powders10.1016/j.jnoncrysol.2023.122166 ↗
45. The phosphating effect on the properties of FeSiCr
46. Electromagnetic properties of FeSiCr alloy powders modified with amorphous SiO210.1016/j.jmmm.2020.167151 ↗
47. The magnetic properties and microstructure of phosphated amorphous FeSiCr/silane soft magnetic composite10.1016/j.jmmm.2018.11.058 ↗
48. Static and dynamic magnetic properties of Co2Z barium ferrite nanoparticle composites10.1007/s10853-005-6312-y ↗
49. Phosphoric acid addition effect on the microstructure and magnetic properties of iron-based soft magnetic composites10.1016/j.jmmm.2017.08.096 ↗
50. Microstructure and properties of FeSiCr/PA6 composites by injection molding using FeSiCr powders by phosphating and coupling treatment10.1016/j.jmmm.2017.12.067 ↗
51. The enhanced magnetic properties of FeSiCr powder cores composited with carbonyl iron powder
52. Soft magnetic composites based on the Fe elemental, binary and ternary alloy systems fabricated by surface nitridation10.1016/j.jmmm.2019.01.070 ↗
53. Core-shell structured Mn-Zn-Fe ferrite/Fe-Si-Cr particles for magnetic composite cores with low loss10.1016/j.apt.2018.03.012 ↗