Effect of Ti or Zr alloying on the microstructure evolution and mechanical properties of W-Cu immiscible bimetallic composite
Source abstract
Abstract
W-Cu immiscible bimetallic composite is an electrically and thermally conductive material with high temperature service potential. In present work, to improve its load bearing capacity, Ti and Zr were introduced to enhance the W-Cu interfacial bond strength and to achieve solid solution reinforcement. By infiltration of Cu-Ti/Zr alloy with different compositions into the W skeleton, both the strength and hardness were enhanced without sacrificing ductility. The Ti/Zr incorporation transformed the incoherent interface of W-Cu to a (W-Ti/Zr)-(Cu-Ti/Zr) semi-coherent interface. By utilizing the EDS technique, significant compositional interdiffusion between immiscible metals was revealed. Moreover, the introduction of Ti/Zr purified grain boundaries by capturing the reactive oxygen to generate TiO 2 and ZrO 2 , which inhibited W-Ti/Zr grain growth by Zenner pinning. As the alloy content rose from 0 wt% to 5 wt%, the average grain size of the W-Ti/Zr (or W) alloy decreased from 2.14 µm to 1.40 µm. It is noteworthy that the alloying with 2.50 wt% Ti reached peak microhardness (417 HV), bending strength (1546 MPa), and ultimate tensile strength (532 MPa). However, the presence of Cu-Ti/Zr solid solution and oxide particles increased the scattering effect of electrons in the Cu matrix, leading to a falling in electrical conductivity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Alloys created between immiscible elements10.1016/j.pmatsci.2004.07.001 ↗
2. Glass-forming ability determined by an n-body potential in a highly immiscible Cu-W system through molecular dynamics simulations10.1103/PhysRevB.68.144201 ↗
3. A comparative assessment of explosive and other methods of compaction in the production of tungsten—copper composites10.1179/pom.1976.19.1.31 ↗
4. Progress, challenges and potentials/trends of tungsten-copper (WCu) composites/pseudo-alloys: fabrication, regulation and application10.1016/j.ijrmhm.2021.105648 ↗
5. W–Cu composites with submicron-and nanostructures: progress and challenges10.1038/s41427-019-0179-x ↗
6. Synthesis of nanocrystalline copper–tungsten alloys by mechanical alloying10.1016/S0921-5093(00)01444-1 ↗
7. Experimental investigations on the synthesis of W–Cu nanocomposite through spark plasma sintering10.1016/j.jallcom.2015.03.183 ↗
8. Densification and properties investigation of W-Cu composites prepared by electroless-plating and activated sintering10.1016/j.ijrmhm.2017.11.042 ↗
9. W–Cu composites with homogenous Cu–network structure prepared by spark plasma sintering using core–shell powders10.1016/j.ijrmhm.2019.05.003 ↗
10. Infiltration sintering of WCu alloys from copper-coated tungsten composite powders for superior mechanical properties and arc-ablation resistance10.1016/j.jallcom.2017.08.164 ↗
11. Three-dimensional characterization of the permeability of W–Cu composites using a new “TriBeam” technique10.1016/j.actamat.2013.10.043 ↗
12. Spark plasma sintering of W–15Cu alloy from ultrafine composite powder prepared by spray drying and calcining-continuous reduction technology10.1016/j.matchar.2008.07.012 ↗
13. Formation of a W–25% Cu nanocomposite during high pressure torsion10.1016/j.scriptamat.2005.02.017 ↗
14. Assessment of solid state and liquid phase sintering models by comparison of isothermal densification kinetics in W and W-Cu systems10.1016/j.actamat.2015.12.041 ↗
15. Effects of Zn additions on the solid-state sintering of W–Cu composites10.1016/j.matdes.2011.10.006 ↗
16. The influence of pre-sintering temperature on the microstructure and properties of infiltrated ultrafine-grained tungsten-copper composites10.1016/j.jallcom.2020.153761 ↗
17. Investigation on preparation and mechanical properties of W–Cu–Zn alloy with low W–W contiguity and high ductility10.1016/j.matdes.2015.07.106 ↗
18. Thermal stability and high-temperature mechanical performance of nanostructured W–Cu–Cr–ZrC composite10.1016/j.compositesb.2020.108600 ↗
19. Enhanced ductility of WMoCu alloy through the formation of nanometer-to-micrometer-thick dual-phase transition phase layer10.1016/j.matdes.2018.12.008 ↗
20. Fabricating fine-grained tungsten heavy alloy by spark plasma sintering of low-energy ball-milled W–2Mo–7Ni–3Fe powders10.1016/j.msea.2013.04.065 ↗
21. Preparation and properties of multiphase solid-solution strengthened high-performance W–Cu alloys through alloying with Mo, Fe and Ni10.1016/j.msea.2023.144909 ↗
22. Preparation and properties of W-30 wt% Cu alloy with the additions of Ni and Fe elements10.1016/j.jallcom.2022.167040 ↗
23. Design of stable nanocrystalline alloys10.1126/science.1224737 ↗
24. Preparation of W-Cu alloy with high density and ultrafine grains by mechanical alloying and high pressure sintering10.1016/j.ijrmhm.2016.07.013 ↗
25. Insight into the microstructure and tensile behavior of the W–Cu composite reinforced with tungsten fibers and particulates10.1002/adem.202000502 ↗
26. Effects of Zr alloying on cohesion properties of Cu/W interfaces10.1016/j.jallcom.2015.11.154 ↗
27. Grain boundary segregation, chemical ordering and stability of nanocrystalline alloys: atomistic computer simulations in the Ni–W system10.1016/j.actamat.2007.03.024 ↗
28. Nanoscale segregation behavior and high-temperature stability of nanocrystalline W–20 at% Ti10.1016/j.actamat.2014.03.039 ↗
29. First-principles determination of grain boundary strengthening in tungsten: dependence on grain boundary structure and metallic radius of solute10.1016/j.actamat.2016.08.048 ↗
30. Accelerated sintering in phase-separating nanostructured alloys10.1038/ncomms7858 ↗
31. Effect of Zn and Ni added in W–Cu alloy on penetration performance and penetration mechanism of shaped charge liner10.1016/j.ijrmhm.2015.07.022 ↗
32. Interdiffusion of Cu substrate/electrodeposits for Cu/Co, Cu/Co-W, Cu/Co/Ni and Cu/Co-W/Ni systems10.1016/S0257-8972(97)00524-0 ↗
33. Solid state and liquid phase sintering of mechanically activated W–20 wt% Cu powder mixture10.1016/j.jallcom.2007.08.080 ↗
34. Tungsten–copper composite production by activated sintering and infiltration10.1016/j.ijrmhm.2011.03.009 ↗
35. High hardness and wear resistance of W-Cu composites achieved by elemental dissolution and interpenetrating nanostructure10.1088/1361-6528/ab5e5d ↗
36. A novel approach to fabricate W–Cu functionally graded materials via sedimentation and infiltration method10.1016/j.msea.2021.141276 ↗
37. Densification of W-Ni-Cu and W-Fe-Cu alloys at 1573 K
38. Alloy effects in nanostructures10.1016/0965-9773(93)90088-S ↗
39. Fabrication of W–Cu/CeO2 composites with excellent electric conductivity and high strength prepared from copper-coated tungsten and Ceria powders10.1016/j.msea.2014.12.047 ↗
40. From solid solutions to fully phase separated interpenetrating networks in sputter deposited “immiscible” W–Cu thin films10.1016/j.actamat.2015.07.050 ↗
41. Theory of photon emission in electron tunneling to metallic particles10.1103/PhysRevLett.68.3224 ↗
42. Modified Matthiessen's rule: more scattering leads to less resistance10.1103/PhysRevB.105.045140 ↗
43. Microstructure and fracture behavior of 90W–7Ni-3Fe alloy fabricated by laser directed energy deposition10.1016/j.jallcom.2021.158975 ↗
44. Mechanical properties and microstructures of W-1% Y2O3 microalloyed with Zr10.1016/j.msea.2016.02.072 ↗
45. Matrix and interfacial precipitation in the W-Ni-Fe system10.1007/BF02644990 ↗
46. J. Fu, K. Ren, L. Yin, R. Yang, T. Zhao, Z. Chen, Preparation methods and performance of new tungsten-based ceramic alloy, Materials & Design 206 (2021) 109781.10.1016/j.matdes.2021.109781 ↗
47. Preparation, microstructure, and constitutive equation of W-0.25 wt% Al2O3 alloy10.1016/j.msea.2018.12.001 ↗
48. Effect of Al2O3 content and swaging on microstructure and mechanical properties of Al2O3/W alloys10.1016/j.ijrmhm.2019.105082 ↗
49. Microstructure refinement and mechanical properties improvement in the W-Y2O3 alloys via optimized freeze-drying10.1016/j.ijrmhm.2020.105453 ↗
50. Coupling effect of intergranular and intragranular particles on ductile fracture of Mo–La2O3 alloys10.1016/j.msea.2015.05.032 ↗
51. Fabrication of nanostructured powders by chemical processes10.1016/S1359-6462(01)00896-X ↗
52. The role of copper in the enhanced performance of W/Ti catalysts for low-temperature selective catalytic reduction10.1016/j.apsusc.2020.148643 ↗
53. On the rule of mixtures for the hardness of particle reinforced composites10.1016/S0921-5093(00)00909-6 ↗
54. The simultaneous improvements of strength and ductility in W–Y2O3 alloy obtained via an alkaline hydrothermal method and subsequent low temperature sintering10.1016/j.msea.2020.139329 ↗
55. Strengthening nanocrystalline immiscible bimetallic composite by high-entropy effect10.1016/j.compositesb.2022.110127 ↗
56. Study on the arc erosion resistance and mechanism of Cr- doped WCu composites10.1016/j.matchar.2023.113291 ↗
57. Preparation and properties of Al2O3 dispersed fine-grained W-Cu alloy10.1016/j.apt.2022.103523 ↗
58. Effect of ZrB2 addition on microstructure evolution and mechanical properties of 93 wt% tungsten heavy alloys10.1016/j.msea.2021.141870 ↗
59. Grain boundary migration and Zener pinning in particle-containing copper crystals10.1016/1359-6454(95)00421-1 ↗
60. Finite element simulation of Zener pinning behavior10.1016/S1359-6454(99)00069-5 ↗
61. Microstructure and mechanical properties of mechanically alloyed and solid-state sintered tungsten heavy alloys10.1016/S0921-5093(00)00968-0 ↗
62. Microstructure and mechanical properties of super-strong nanocrystalline tungsten processed by high-pressure torsion10.1016/j.actamat.2006.05.005 ↗
63. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
64. Geometrically necessary dislocation and size-dependent plasticity10.1016/S1359-6462(02)00329-9 ↗
65. Sintering atmosphere effects on the ductility of W-Ni-Fe heavy metals10.1007/BF02644206 ↗
66. Flow behaviour of a heat treated tungsten heavy alloy10.1016/j.msea.2012.05.101 ↗
67. Simultaneous enhancements of strength and hardness for fine-grained W-NiFeCoCrMn composites10.1016/j.matchar.2023.112933 ↗
68. Microstructural evolution and mechanical properties of Cu–Al alloys subjected to equal channel angular pressing10.1016/j.actamat.2008.12.002 ↗
69. Dislocation structure and the effect of stacking-fault energy in high temperature creep of Cu-Al solid solutions10.1080/14786437108216386 ↗
70. Effects of multiple trace alloying elements on the microstructure and properties of Cu-4 wt% Ti alloys10.1016/j.msea.2017.09.072 ↗
71. Correlation of structure and flow behaviour of Cu–Ti–Cd alloys10.1016/j.msea.2006.05.034 ↗
72. Tensile deformation and fracture behavior of an oxide dispersion strengthened copper alloy10.1016/S0261-3069(99)00096-5 ↗