journal article·2024-05

Microstructural evolution and strengthening mechanisms of additively-manufactured Al-Mg-Sc-Zr alloys: Laser directed energy deposition versus laser powder bed fusion

Zihong Wang, LingGuo Zeng, Xin Lin, Jingfeng Wang, Zhe Feng, Cong Dang, Hongyun Li, Yanfang Wang, Weidong Huang

Publisher page

Abstract

Al-Mg-Sc-Zr is a high-performance Al alloy developed for laser additive manufacturing (LAM). The addition of Sc/Zr can stimulate both grain-boundary and precipitation strengthening, which are closely related to the precipitation behavior of the primary and secondary Al 3 (Sc,Zr) phases, respectively. For LAM, laser direct energy deposition (L-DED) and laser powder bed fusion (L-PBF) are two typical processes. However, little is known about the disparities in the microstructural evolution and strengthening behavior of Al-Mg-Sc-Zr alloys under the L-PBF and L-DED processes. In this study, a comparative analysis of the microstructure and strengthening behavior of L-DED- and L-PBF-processed Al-Mg-Sc-Zr alloys was conducted. Owing to the higher cooling rate during L-PBF, fewer primary Al 3(Sc,Zr) phases precipitated during solidification, and more secondary Al 3 (Sc,Zr) phases formed during aging, resulting in higher precipitation strengthening. More importantly, the ultrafine grains at the submicron scale in the L-PBF sample not only enhanced grain-boundary strengthening but also provided additional strengthening owing to the lack of mobile dislocations in the microstructure. This work is helpful for further optimizing the mechanical properties of LAM-processed Al-Mg-Sc-Zr alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. An overview of modern metal additive manufacturing technology10.1016/j.jmapro.2022.10.060 ↗
2. The scandium effect in multicomponent alloys10.1080/09506608.2015.1137692 ↗
3. Recent advances in inoculation treatment for powder-based additive manufacturing of aluminium alloys10.1016/j.mser.2024.100773 ↗
4. The latest development of Sc-strengthened aluminum alloys by laser powder bed fusion10.1016/j.jmst.2022.11.028 ↗
5. Investigation and characterization of an Al-Mg-Zr-Sc alloy with reduced Sc content for laser powder bed fusion10.1016/j.jallcom.2022.166519 ↗
6. Influence mechanism of process parameters on relative density, microstructure, and mechanical properties of low Sc-content Al-Mg-Sc-Zr alloy fabricated by selective laser melting, Chin
7. Process and mechanical properties: applicability of a scandium modified Al-alloy for laser additive manufacturing10.1016/j.phpro.2011.03.047 ↗
8. Temperature gradient induced tough-brittle transition behavior of a high-strength Al-4.2Mg-0.4Sc-0.2Zr alloy fabricated by laser powder bed fusion additive manufacturing
9. Effect of the heat treatment on the mechanical properties and microstructure of Scalmalloy® manufactured by Selective Laser Melting (SLM) under certified conditions10.1016/j.matchar.2022.112549 ↗
10. Excellent strength–ductility balance of Sc-Zr-modified Al-Mg alloy by tuning bimodal microstructure via hatch spacing in laser powder bed fusion10.1016/j.matdes.2022.110976 ↗
11. High strength Al-Mg-Sc-Zr alloy with heterogeneous grain structure and intragranular precipitation produced by laser powder bed fusion10.1016/j.jallcom.2023.168722 ↗
12. Recent progress on the additive manufacturing of aluminum alloys and aluminum matrix composites: microstructure, properties, and applications10.1016/j.ijmachtools.2023.104047 ↗
13. Laser-based directed energy deposition (DED-LB) of advanced materials10.1016/j.msea.2022.142967 ↗
14. Wire arc additive manufacturing of Al-Mg-Sc alloy: an analysis of the effect of Sc on microstructure and mechanical properties10.1016/j.matchar.2023.113116 ↗
15. Achieving high strength-ductility properties of wire-arc additive manufactured Al-Mg-Sc aluminum alloy via friction stir processing post-treatment and high temperature aging treatment10.1016/j.matlet.2023.134913 ↗
16. Microstructures and mechanical properties of Al-Mg-Sc-Zr alloy additively manufactured by laser direct energy deposition
17. Directed energy deposition additive manufacturing of a Sc/Zr-modified Al-Mg alloy: effect of thermal history on microstructural evolution and mechanical properties10.1016/j.msea.2020.140606 ↗
18. Laser powder bed fusion of Zr-modified Al-Cu-Mg alloy: crack-inhibiting, grain refinement, and mechanical properties10.1016/j.msea.2022.142618 ↗
19. Investigations of the processing–structure–performance relationships of an additively manufactured AlSi10Mg alloy via directed energy deposition10.1016/j.jallcom.2023.169050 ↗
20. Additivity of strengthening mechanisms in ultrafine grained Al-Mg-Sc alloy10.1016/j.msea.2013.05.006 ↗
21. Influence of the degree of scandium supersaturation on the precipitation kinetics of rapidly solidified Al-Mg-Sc-Zr alloys10.1016/j.actamat.2016.07.001 ↗
22. ASTM E8/E8M-11, Standard Test Methods for Tension Testing of Metallic Materials, 2011.
23. Effect of Sc on microstructure and mechanical properties of as-cast Al-Mg alloys10.1016/j.matdes.2015.10.132 ↗
24. Criteria for developing castable, creep resistant aluminum-based alloys – a review10.3139/146.101249 ↗
25. On the mechanisms of nucleation and subsequent development of the PLC bands in an AlMg alloy10.1016/j.jallcom.2021.159135 ↗
26. New Al-Mg-Sc alloys10.1016/S0921-5093(99)00673-5 ↗
27. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
28. A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles
29. Single-crystal laser deposition of superalloys: processing–microstructure maps10.1016/S1359-6454(00)00367-0 ↗
30. Application of cellular automaton–finite element model to the grain refinement of directionally solidified Al-4.15 wt% Mg alloys10.1016/S1359-6454(02)00015-0 ↗
31. Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition
32. Strengthening mechanisms in solid solution aluminum alloys10.1007/s11661-006-0142-7 ↗
33. Strengthening mechanisms of an Al-Mg-Sc-Zr alloy10.1016/S1359-6454(02)00258-6 ↗
34. Effects of the grain shape and crystallographic texture on the grain-scale mechanical behavior of additively manufactured aluminum alloys
35. Precipitation evolution in Al-0.1Sc, Al-0.1Zr and Al-0.1Sc-0.1Zr (at%) alloys during isochronal aging10.1016/j.actamat.2010.05.054 ↗
36. Precipitation hardening caused by a difference in shear modulus between particle and matrix10.1002/pssa.2210780223 ↗
37. Transition of tensile deformation behaviors in ultrafine-grained aluminum10.1016/j.actamat.2005.05.005 ↗
38. Inhomogeneous yielding and work hardening of a fine grained Al-Mg alloy10.1016/j.msea.2013.07.044 ↗