journal article·2024-07

Revisiting precipitates in Al-Cu-Li alloys: Experiments and first-principles calculations of thermodynamic stability of Al2CuLi(T1) precipitate

Maya Putri Agustianingrum, Shailendra Kumar Verma, Danny Petschke, Frank Lotter, Torsten E.M. Staab, Songbai Tang, Lingfei Cao, Najla Zulfikar, Hyeonseok Cho, Timothy Alexander Listyawan, Hyojung Kim, Chanumul Jung, Su-Hyeon Kim, Alireza Zargaran, Kyoungdoc Kim

Publisher page

Abstract

We recently proposed two atomic structures of the Al 2CuLi (T1) phase using first-principles density functional theory calculations. Here, we find that both the previously proposed T1 phases (Al 6Cu 4Li 3, Al 13Cu 7Li 6) are predicted using X-ray absorption fine structure (XAFS) spectroscopy. It is found that the semi-coherent T1/Al interface of two T1 phases shows approximately 0.70 J/m 2 with Al-Li termination at interface. Thus, there is a coexistence of both T1 phases in Al-Cu-Li alloys based on our computations. It is also found that the T1 formation is controlled by Ag and Mg solute segregations at interface over Cu/Li ratio based on bulk thermodynamics.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Structure and properties during aging of an ultra-high strength Al-Cu-Li-Ag-Mg alloy10.1016/0956-716X(90)90570-7 ↗
2. Fabrication methods to manufacture isotropic Al-Li alloys and products for space and aerospace applications10.1016/S0921-5093(98)00827-2 ↗
3. The elastic modulus of aluminium-lithium alloys10.1007/BF00591481 ↗
4. Quantification and modelling of the microstructure/strength relationship by tailoring the morphological parameters of the T1 phase in an Al–Cu–Li alloy10.1016/j.actamat.2014.04.046 ↗
5. Quantification of the influence of increased pre-stretching on microstructure-strength relationships in the Al–Cu–Li alloy AA219510.1016/j.actamat.2016.02.017 ↗
6. Crystal structure and stability of T1 precipitates in aged Al–Li–Cu alloys
7. Structure and Deformation Behavior of T1 Precipitate Plates in an AI-2Li-1Cu Alloy10.1007/BF02647717 ↗
8. Atomic structure of T1 precipitates in Al–Li–Cu alloys revisited with HAADF-STEM imaging and small-angle X-ray scattering10.1016/j.actamat.2010.09.044 ↗
9. Combined electron beam imaging and ab initio modeling of T1 precipitates in Al–Li–Cu alloys10.1063/1.3590171 ↗
10. First-principles study of crystal structure and stability of T1 precipitates in Al-Li-Cu alloys10.1016/j.actamat.2017.12.013 ↗
11. First-principles calculations of bulk and interfacial thermodynamic properties of the T1 phase in Al-Cu-Li alloys10.1016/j.scriptamat.2021.114009 ↗
12. Coarsening mechanism of T1 precipitation and calculation of T1/Al interface properties in 2198 Al–Cu–Li alloys: experimental and DFT studies10.1016/j.vacuum.2022.111333 ↗
13. Refinement of the crystal structure of hexagonal Al2CuLi10.1016/S0022-4596(05)80086-6 ↗
14. Melting and Casting of Aluminium-lithium Alloys, In: Alum.-lithium Alloys Process
15. Effect of heat treatment on the microstructure and mechanical properties of extruded Al–4Cu–1Li–0.4Mg–0.4Ag–0.18Zr alloy10.1016/j.msea.2018.01.063 ↗
16. Microstructural evolution and mechanical properties of as-cast and T6-treated AA2195 DC cast alloy10.1016/j.msea.2012.07.075 ↗
17. Thompson · 2001
18. Self-consistent aspects of x-ray absorption calculations10.1088/0953-8984/21/34/345501 ↗
19. ATHENA, ARTEMIS, HEPHAESTUS: data analysis for X-ray absorption spectroscopy using IFEFFIT10.1107/S0909049505012719 ↗
20. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
21. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
22. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
23. Multiscale modeling of θ′ precipitation in Al–Cu binary alloys10.1016/j.actamat.2004.03.001 ↗
24. Interfacial stability of θ′/Al in Al-Cu alloys10.1016/j.scriptamat.2018.09.018 ↗
25. Microstructural evolution during ageing of Al–Cu–Li–x alloys10.1016/j.actamat.2013.12.001 ↗
26. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
27. Effect of precipitates on mechanical properties of AA219510.1016/j.jallcom.2016.01.229 ↗
28. Precipitation hardening of AA2195 DC cast alloy10.1179/1879139514Y.0000000149 ↗
29. Effects of heat treatment on the microstructure and mechanical properties of extruded 2196 Al-Cu-Li alloy10.1016/j.matdes.2020.108746 ↗
30. First-principles analysis of the Al-rich corner of Al-Li-Cu phase diagram10.1016/j.actamat.2022.118129 ↗
31. Influence of thermal exposure on the microstructure evolution and mechanical behaviors of an Al-Cu-Li alloy10.1016/j.matdes.2023.111767 ↗
32. Effect of aging time on the microstructure evolution and mechanical property in an Al-Cu-Li alloy sheet10.1016/j.msea.2018.10.064 ↗
33. The role of plastic deformation on the competitive microstructural evolution and mechanical properties of a novel Al-Li-Cu-X alloy10.1016/S1471-5317(00)00002-X ↗
34. The influence of Cu/Li ratio on precipitation in Al–Cu–Li–x alloys10.1016/j.actamat.2012.12.041 ↗
35. Influence of Cu/Li ratio on the microstructure evolution of bobbin-tool friction stir welded Al–Cu–Li alloys10.1016/j.jmrt.2019.01.014 ↗
36. A novel GP-Li precursor and the correlated precipitation behaviors in Al-Cu-Li alloys with different Cu/Li ratio10.1016/j.actamat.2022.118442 ↗
37. Precipitation processes in Al-Cu-Li alloy studied by DSC10.4028/www.scientific.net/MSF.13-14.377 ↗
38. The effect of minor solute additions on the precipitation path of an Al Cu Li alloy10.1016/j.actamat.2016.05.050 ↗
39. Atom probe tomography and transmission electron microscopy characterisation of precipitation in an Al–Cu–Li–Mg–Ag alloy10.1016/j.ultramic.2010.12.004 ↗
40. Role of Ag and Mg on precipitation of T1 phase in an Al-Cu-Li-Mg-Ag alloy10.1016/S1359-6462(00)00651-5 ↗
41. Heterogeneous nucleation of T1 precipitates in solid solution of Al-Cu-Li alloys from Ag-rich structures: An ab initio study10.1016/j.scriptamat.2022.115191 ↗
42. Quantitative analysis of the influences of pre-treatments on the microstructure evolution and mechanical properties during artificial ageing of an Al–Cu–Li–Mg–Ag alloy10.1016/j.msea.2020.139253 ↗
43. S.K. Verma, 2023, Novel L12 precipitate hardened Co-base alloys, Indian Institute of Science.
44. One parameter model for strength properties of hardenable aluminium alloys10.1016/j.matdes.2008.02.001 ↗
45. Statistical theories of solid solution hardening10.1016/0001-6160(72)90085-5 ↗
46. The theory of solution hardening10.1080/14786437708235994 ↗
47. Modelling mechanical properties for non-hardenable aluminium alloys10.1016/j.commatsci.2007.03.013 ↗
48. Robust atomistic calculation of dislocation line tension10.1088/0965-0393/23/8/085008 ↗
49. First-principles study of solute-dislocation interaction in aluminum-rich alloys10.1103/PhysRevB.64.224203 ↗
50. Argon · 2008
51. The possibilities to lower the stacking fault energies of aluminum materials investigated by first-principles energy calculations10.1016/j.commatsci.2015.06.015 ↗
52. Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: a review10.1016/j.jare.2017.12.004 ↗
53. A model for precipitation strengthening in multi-particle systems10.1016/j.commatsci.2014.04.025 ↗
54. Modeling the age-hardening behavior of Al-Si-Cu alloys10.1007/s11661-006-0221-9 ↗