Compressive mechanical properties of thermal sprayed AlCoCrFeNi high entropy alloy coating
Source abstract
Abstract
Atmospheric plasma spraying (APS) was used to deposit an AlCoCrFeNi high entropy alloy (HEA) coating on stainless steel substrate. The as-deposited coating was about 300 μm thick and the microstructure consisted of a nickel solid-solution matrix, together with a number of secondary phases/intermetallics. In addition, phase and splat boundaries were also prevailing. However, the extent of intermetallics and secondary phases were supressed, compared to other processing techniques (e.g., melting) of HEA, due to fast solidification in the APS process. In-situ micro-pillar compression was employed to evaluate the mechanical properties of the coating. The experimental results show that, mechanical properties of the coating in the cross-sectional direction (963.14 ± 28.58 MPa of yield strength and 1005.58 ± 22.08 MPa of compressive strength) is marginally higher than that of planar direction (802.33 ± 43.76 MPa of yield strength and 817.73 ± 43.84 MPa of compressive strength). The presence of secondary phases and/or intermetallics in the coating microstructure acts as a reinforcement medium to allow effective load bearing capacities of the coating. On the hindsight, phase and splat boundary areas are the ‘weakest link’, that acts as a slip/shear plan initiation site. The orientation of these phase/splat boundaries to that of direction of loading plays a significant role on the coating failure mode.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. High-entropy alloys–a new era of exploitation
2. Review of recent research on AlCoCrFeNi high-entropy alloy10.3390/met11081302 ↗
3. The effect of boron on the corrosion resistance of the high entropy alloys Al0. 5CoCrCuFeNiB x10.1149/1.2744133 ↗
4. Microstructure and properties of FeCoNiCrX (XMn, Al) high-entropy alloy coatings10.1016/j.jallcom.2022.166061 ↗
5. Synthesis and properties of multiprincipal component AlCoCrFeNiSix alloys10.1016/j.msea.2010.07.049 ↗
6. Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties10.1063/1.2734517 ↗
7. Microstructure and wear behavior of AlxCo1. 5CrFeNi1. 5Tiy high-entropy alloys10.1016/j.actamat.2011.06.041 ↗
8. Microstructure, hardness, and tribological properties of CoCrFeNiX (X= Mo, Ti, W) high entropy alloy coating by red-blue composite laser cladding on copper alloy10.1016/j.surfcoat.2024.130761 ↗
9. Transition in microstructural and mechanical behavior by reduction of sigma-forming element content in a novel high entropy alloy10.1016/j.matdes.2018.02.036 ↗
10. Microstructure and wear behavior of atmospheric plasma-sprayed AlCoCrFeNiTi high-entropy alloy coating10.1007/s11665-016-2396-6 ↗
11. On the superior hot hardness and softening resistance of AlCoCrxFeMo0. 5Ni high-entropy alloys10.1016/j.msea.2011.01.072 ↗
12. High-entropy pyrochlores with low thermal conductivity for thermal barrier coating materials10.1007/s40145-019-0342-4 ↗
13. High-temperature oxidation behavior of CuAlNiCrFe high-entropy alloy bond coats deposited using high-speed laser cladding process10.1016/j.surfcoat.2020.126093 ↗
14. Abrasive wear of nanostructured cermet coatings in dry and slurry conditions10.1016/j.ijrmhm.2021.105638 ↗
15. Dual-phase high-entropy alloys for high-temperature structural applications10.1016/j.jallcom.2017.09.089 ↗
16. Recent progress in high entropy alloys10.3166/acsm.31.633-648 ↗
17. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
18. Murty · 2019
19. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
20. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
21. Corrosion of high entropy alloys10.1038/s41529-017-0009-y ↗
22. Elastic and plastic deformations in a high entropy alloy investigated using a nanoindentation method10.1016/j.intermet.2015.10.002 ↗
23. Microstructure and oxidation behavior of new refractory high entropy alloys10.1016/j.jallcom.2013.08.102 ↗
24. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
25. A combinatorial assessment of AlxCrCuFeNi2 (0< x< 1.5) complex concentrated alloys: microstructure, microhardness, and magnetic properties10.1016/j.actamat.2016.06.025 ↗
26. Entropy-driven phase stability and slow diffusion kinetics in an Al0. 5CoCrCuFeNi high entropy alloy10.1016/j.intermet.2012.07.001 ↗
27. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
28. Wang, F., et al., Cooling rate and size effect on the microstructure and mechanical properties of AlCoCrFeNi high entropy alloy. 2009.10.1115/1.3120387 ↗
29. Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤ x≤ 2) high-entropy alloys10.1016/j.mseb.2009.05.024 ↗
30. Microstructure and mechanical property of as-cast,-homogenized, and-deformed AlxCoCrFeNi (0≤ x≤ 2) high-entropy alloys10.1016/j.jallcom.2009.08.090 ↗
31. Pressure-induced phase transition in the AlCoCrFeNi high-entropy alloy10.1016/j.scriptamat.2018.10.020 ↗
32. Macrostructure, microstructure, and mechanical properties of Al0. 2CoCrFeNi high-entropy alloy produced by vacuum induction melting
33. The influence of Al elements on the structure and the creep behavior of AlxCoCrFeNi high entropy alloys10.1016/j.matlet.2015.11.016 ↗
34. Solidification behaviour in laser cladding of AlCoCrCuFeNi high-entropy alloy on magnesium substrates10.1016/j.jallcom.2013.10.254 ↗
35. Slurry erosion behaviour of AlCoCrFeNi high entropy alloy coating prepared by atmospheric plasma spraying
36. Corrosion–wear behaviour of thermal sprayed nanostructured FeCu/WC–Co coatings10.1016/j.wear.2006.03.026 ↗
37. Effect of nanostructuring and Al alloying on friction and wear behaviour of thermal sprayed WC–Co coatings10.1016/j.surfcoat.2012.02.030 ↗
38. Microstructural, mechanical and wear properties of atmospheric plasma-sprayed and high-velocity oxy-fuel AlCoCrFeNi equiatomic high-entropy alloys (HEAs) coatings10.1007/s11666-022-01520-y ↗
39. Investigation on the microstructure and micro-mechanical properties of thermal-sprayed NiCoCrAlY high entropy alloy coating10.3390/designs8020037 ↗
40. Characterisation and property evaluation of high entropy alloy coating on 316L steel via thermal spray synthesis10.1016/j.triboint.2023.108525 ↗
41. Electrochemical and hot corrosion behaviour of annealed AlCoCrFeNi HEA coating over steel10.1038/s41598-024-55962-1 ↗
42. Deformation and strengthening of SiC reinforced Al-MMCs during in-situ micro-pillar compression10.1016/j.msea.2019.138141 ↗
43. Strength of a 3D printed Al 7068 alloy under micro-pillar compression10.1007/s12540-022-01171-2 ↗
44. Deformation of electrodeposited gradient Co/Sn multilayered coatings under micro-pillar compression10.1016/j.engfracmech.2018.08.022 ↗
45. Deformation behavior of the hybrid S-phase layer formed on a stainless-steel substrate by thermochemical heat treatment under mechanical loading10.1016/j.msea.2024.146462 ↗
46. Micro-compression testing: a critical discussion of experimental constraints10.1016/j.msea.2009.01.005 ↗
47. Strength effects in micropillars of a dispersion strengthened superalloy10.1002/adem.201000089 ↗
48. Microstructural design and oxidation resistance of CoNiCrAlY alloy coatings in thermal barrier coating system10.1016/j.jallcom.2016.07.018 ↗
49. Thermal stability of phases in a NiCoCrAlY coating alloy10.1557/JMR.2008.0282 ↗
50. Modelling of phase equilibria in MCrAlY coating systems10.1016/j.surfcoat.2004.02.018 ↗
51. Microstructure assessment at high temperature in NiCoCrAlY overlay coating obtained by laser metal deposition10.1016/j.jmrt.2018.12.006 ↗
52. Haynes · Elev. Temp. Coat. Sci. Technol. · 1999 · 185
53. Microstructural evolution of platinum modified nickel aluminide bond coat during thermal cycling10.1016/S0257-8972(02)00591-1 ↗
54. Effect of heat treatment on the microstructure and nanoindentation behavior of AlCoCrFeNi high entropy alloy10.1016/j.intermet.2024.108302 ↗
55. Arun, S., N. Radhika, and B. Saleh, Exploring the potential of high entropy alloys: a comprehensive review on microstructure, properties, and applications. Johnson Matthey Technology Review, 2027.
56. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
57. Heat treatment impacts the micro-structure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.jallcom.2016.05.034 ↗
58. Effect of Al and Cr addition on tribological behaviour of HVOF and APS nanostructured WC–Co coatings10.1179/174591907X229626 ↗
59. Microstructure and micro-mechanical properties of friction stir processed Al 5086-based surface composite. Materials Today