Application of microcrystalline cellulose to fabricate ZnO with enhanced photocatalytic activity
Source abstract
Abstract
Abstract Microcrystalline cellulose (MCC), deriving from naturally renewable biomass resources, has been used to fabricate nanocrystalline ZnO materials via a facile hydrothermal method. XRD analysis results indicate that the obtained ZnO crystallite possess hexagonal wurtzite structure. Its morphology was measured by SEM, showing slice clusters and flowers. Comparatively, ZnO of irregular slices was prepared when no MCC was added in the synthetic route. ZnO synthesized with and without MCC behaves quite different photocatalytic activity. It is found that photocatalytic efficiency of ZnO prepared by 1 g MCC on degrading methylene blue reaches 98.3% under UV irradiation (power of 6 W). This is higher than the catalytic efficiency of both the ZnO prepared without MCC addition and of the commercial Degussa P25. Simultaneously, the as-prepared ZnO also exhibits excellent reusable ability. No obvious abatement is observed after the catalyst is re-used for 5 cycles. Taken together high photocatalytic and re-used efficiency, we anticipate that our controllable, environment-friendly and cost-effective approach can be applied to synthesize ZnO catalytic materials on a large scale.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Aerogels and thermal insulation · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Performance of advanced photocatalytic detoxification of municipal wastewater under solar radiation – a mini review
2. Solar photocatalysis for treatment of Acid Yellow-17 (AY-17) dye contaminated water using Ag@TiO2 core–shell structured nanoparticles10.1007/s11356-013-1582-4 ↗
3. Novel nanoparticles for water and waste water treatment
4. Photocatalytic activity of nanoneedles, nanospheres, and polyhedral shaped ZnO powders in organic dye degradation processes10.1016/j.jallcom.2013.03.258 ↗
5. Photocatalytic treatment of textile dyehouse effluents with simulated and natural solar light10.30955/gnj.000914 ↗
6. The Degradation of Natural Organic Matter in Surface Water by a NanoTiO2/Diatomite Photocatalytic Reactor10.1002/clen.201200713 ↗
7. Enhancement of visible light photocatalysis by grafting ZnO nanoplatelets with exposed (0001) facets onto a hierarchical substrate10.1039/c1cc14360c ↗
8. Interfacial nanostructuring of ZnO nanoparticles by fullerene surface functionalization for “annealing-free” hybrid bulk heterojunction solar cells10.1021/jp207686c ↗
9. Tip shaping for zno nanorods via hydrothermal growth of ZnO nanostructures in a stirred aqueous solution10.1021/cg2013182 ↗
10. A preliminary study of the preparation of a KBr-doped ZnO nanoparticle and its photocatalytic performance on the removal of oil from oily sewage10.1021/ie202313w ↗
11. ZnO nanocubes with (101) basal plane photocatalyst prepared via a low-frequency ultrasonic assisted hydrolysis process10.1016/j.ultsonch.2013.10.009 ↗
12. Synthesis, structural characterization and photoluminescent properties of mesoporous ZnO by direct precipitation with lignin-phosphate quaternary ammonium salt10.1016/j.jallcom.2012.10.035 ↗
13. Vertically aligned ZnO@ CdS nanorod heterostructures for visible light photoinactivation of bacteria10.1016/j.jallcom.2013.12.158 ↗
14. Photogenerated charge carriers and reactive oxygen species in ZnO/Au hybrid nanostructures with enhanced photocatalytic and antibacterial activity10.1021/ja410800y ↗
15. Synthesis and substantially enhanced gas sensing sensitivity of homogeneously nanoscale Pd-and Au-particle decorated ZnO nanostructures10.1016/j.jallcom.2014.01.167 ↗
16. Room temperature hydrogen gas sensor based on ZnO nanorod arrays grown on a SiO2/Si substrate via a microwave-assisted chemical solution method10.1016/j.jallcom.2012.08.040 ↗
17. ZnO nanocrystalline metal oxide semiconductor via sol gel method
18. Synthesis of ZnO/Zn nano photocatalyst using modified polysaccharides for photodegradation of dyes10.1016/j.carbpol.2014.01.017 ↗
19. Partial replacement of silica with microcrystalline cellulose in rubber composites10.1016/j.compositesa.2009.07.006 ↗
20. Zn5 (OH) 8Cl2·H2O sheets formed using cellulose as matrix via microwave-assisted method and its transformation to ZnO10.1016/j.matlet.2012.10.103 ↗
21. Facile approach for the dispersion of regenerated cellulose in aqueous system in the form of nanoparticles10.1021/bm3009022 ↗
22. Formation and characterization of spherelike bacterial cellulose particles produced by Acetobacter xylinum JCM 9730 strain10.1021/bm100060v ↗
23. Surface engineering of ultrafine cellulose nanofibrils toward polymer nanocomposite materials10.1021/bm400178m ↗
24. Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis10.1007/s10570-006-9061-4 ↗
25. Zinc oxide/carbohydrate hybrid materials via mineralization of starch and cellulose in the strongly hydrated ionic liquid tetrabutylammonium hydroxide10.1021/cg0701372 ↗
26. Preparation and characterization of ZnO nanoparticles coated paper and its antibacterial activity study10.1039/b605623g ↗
27. Novel synthesis of TiO2 nanocrystals induced by nanocrystal cellulose
28. Bacterial cellulose/TiO2 hybrid nanofibers prepared by the surface hydrolysis method with molecular precision10.1039/B9NR00158A ↗
29. The shape dependence of core–shell and hollow titania nanoparticles on coating thickness during layer-by-layer and sol–gel synthesis10.1088/0957-4484/17/13/024 ↗
30. Titanium dioxide/cellulose nanocomposites prepared by a controlled hydrolysis method10.1016/j.compscitech.2005.07.029 ↗
31. Growth of BiVO4 particles in cellulosic fibres by in situ reaction10.1016/j.dyepig.2004.07.005 ↗
32. Low-temperature precipitation synthesis of flower-like ZnO with lignin amine and its optical properties10.1186/1556-276X-8-431 ↗
33. Controlled precipitation of zinc oxide particles at room temperature10.1021/cm0213725 ↗
34. Biopolymer based nanocomposites: comparing layered silicates and microcrystalline cellulose as nanoreinforcement10.1016/j.compscitech.2005.12.010 ↗
35. How does epoxidized soybean oil improve the toughness of microcrystalline cellulose filled polylactide acid composites?10.1016/j.compscitech.2013.10.009 ↗
36. Isolation and characterization of microcrystalline cellulose from oil palm biomass residue10.1016/j.carbpol.2013.01.035 ↗
37. The SL-assisted synthesis of hierarchical ZnO nanostructures and their enhanced photocatalytic activity10.1007/s11051-013-1725-z ↗