journal article·2022-02

A high-density non-equiatomic WTaMoNbV high-entropy alloy: Alloying behavior, microstructure and mechanical properties

Xin Hu, Xinli Liu, Dingshun Yan, Zhiming Li

Publisher page

Abstract

Abstract A bulk fine-grained W35Ta35Mo10Nb10V10 (at%) high-density high-entropy alloy (HEA) was successfully fabricated by mechanical alloying (MA) and spark plasma sintering (SPS) with varying parameters. Microstructure evolution and mechanical behavior of the HEA samples in various processing conditions were investigated. The alloying effect in the mixed high-purity powders becomes more significant as the increase of ball milling time during MA. Upon SPS at various temperatures ranging from 1600 to 1800 °C, a supersaturated body-centered-cubic (BCC) matrix prevails with the precipitation of Ta2VO6 oxides. After SPS at 1700 °C for 10 min, the average mass density, ultimate compressive strength and microhardness of the bulk HEA at room temperature are 14.65 g cm−3, 2519 MPa and 6.50 GPa, respectively. The mechanisms responsible for the high strength and hardness include massive substitutional solid solution strengthening by the alloying of multiple principal elements, grain boundary strengthening, precipitation strengthening by Ta2VO6 particles, and interstitial solid solution strengthening by interstitials (e.g., tramp O from processing) in the matrix. The systematic information on the relationships among processing parameters, alloy densities, microstructure characteristics (e.g., grain sizes, volume fractions and sizes of precipitated oxides) and mechanical properties provide useful insights for the development of novel high-density and high-strength materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Densification, microstructural evolutions of 90W–7Ni-3Fe tungsten heavy alloys during laser melting deposition process10.1016/j.ijrmhm.2020.105254 ↗
2. Effect of high energy ball milling on structure and properties of 95W-3.5Ni-1.5Fe heavy alloys10.1016/j.ijrmhm.2017.08.007 ↗
3. Binder jet printing of tungsten heavy alloy10.1016/j.ijrmhm.2019.104981 ↗
4. Study on characteristics and sintering behavior of W-Ni-Co tungsten heavy alloy by a secondary ball milling method10.1016/j.jallcom.2017.09.125 ↗
5. Bose · 2012
6. Substitution of Ni with NiB prevents shape distortion of liquid phase sintered 90W–6Ni–2Fe–2Co heavy alloys10.1016/j.jallcom.2020.155785 ↗
7. Preparation of fine-grained tungsten heavy alloys by spark plasma sintered W–7Ni–3Fe composite powders with different ball milling time10.1016/j.jallcom.2013.02.014 ↗
8. Morphology and microstructure characterization of 95W-3.5Ni-1.5Fe powder prepared by mechanical alloying
9. A comparison of the sintering characteristics of ball-milled and attritor-milled W–Ni–Fe heavy alloy.pdf10.1557/JMR.1996.0210 ↗
10. Refractory metal alloying: a new method for improving mechanical properties of tungsten heavy alloys10.1016/j.jallcom.2017.03.174 ↗
11. Densification behavior of nanocrystalline W–Ni–Fe composite powders prepared by sol-spray drying and hydrogen reduction process10.1016/j.jallcom.2009.09.050 ↗
12. Microstructure and properties of tungsten heavy alloys fabricated by laser direct deposition10.1080/02670836.2016.1221492 ↗
13. Effect of recrystallization annealing treatment on the hydrogen embrittlement behavior of equimolar CoCrFeMnNi high entropy alloy10.1016/j.ijhydene.2020.11.154 ↗
14. Achieving fine-grain tungsten heavy alloys by selecting a high entropy alloy matrix with low W grain growth rate10.1016/j.matlet.2020.128405 ↗
15. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
16. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
17. Strong and ductile non-equiatomic high-entropy alloys: design, processing, microstructure, and mechanical properties10.1007/s11837-017-2540-2 ↗
18. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
19. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
20. Microstructure and deformation behavior of two TWIP/TRIP high entropy alloys upon grain refinement10.1016/j.msea.2020.140661 ↗
21. A TWIP-TRIP quinary high-entropy alloy: Ttuning phase stability and microstructure for enhanced mechanical properties10.1016/j.msea.2020.140441 ↗
22. On the mechanism of extraordinary strain hardening in an interstitial high-entropy alloy under cryogenic conditions10.1016/j.jallcom.2018.12.061 ↗
23. Interstitial equiatomic CoCrFeMnNi high-entropy alloys: carbon content, microstructure, and compositional homogeneity effects on deformation behavior10.1016/j.actamat.2018.10.050 ↗
24. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
25. High temperature strength of refractory complex concentrated alloys10.1016/j.actamat.2019.06.032 ↗
26. Self-sharpening tungsten high-entropy alloy10.1016/j.actamat.2020.01.005 ↗
27. Microstructure and mechanical properties of ultra-fine grained MoNbTaTiV refractory high-entropy alloy fabricated by spark plasma sintering10.1016/j.jmst.2019.07.013 ↗
28. A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties10.1016/j.jallcom.2018.11.318 ↗
29. Processing, microstructure and properties of Ni1.5CoCuFeCr0.5−xVx high entropy alloys with carbon introduced from process control agent10.1016/j.jallcom.2016.10.288 ↗
30. Thermal stability and grain boundary strengthening in ultrafine-grained CoCrFeNi high entropy alloy composite10.1016/j.matdes.2017.08.053 ↗
31. Alloying behavior, microstructure and mechanical properties in a FeNiCrCo0.3Al0.7 high entropy alloy10.1016/j.matdes.2013.04.061 ↗
32. Influence of Ti addition and sintering method on microstructure and mechanical behavior of a medium-entropy Al 0.6 CoNiFe alloy10.1016/j.msea.2014.09.077 ↗
33. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
34. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
35. Competition between elements during mechanical alloying in an octonary multi-principal-element alloy system10.1016/j.jallcom.2009.03.087 ↗
36. Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys10.1016/j.msea.2011.11.044 ↗
37. Characterization of nanocrystalline CoCrFeNiTiAl high-entropy solid solution processed by mechanical alloying10.1016/j.jallcom.2009.12.010 ↗
38. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
39. Effect of elemental interaction on microstructure of CuCrFeNiMn high entropy alloy system10.1016/j.jallcom.2009.12.183 ↗
40. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
41. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
42. A new thermodynamic parameter to predict formation of solid solution or intermetallic phases in high entropy alloys10.1016/j.jallcom.2015.10.279 ↗
43. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
44. Ultra-high strength WNbMoTaV high-entropy alloys with fine grain structure fabricated by powder metallurgical process10.1016/j.msea.2017.12.021 ↗
45. Atomic-size effect and solid solubility of multicomponent alloys10.1016/j.scriptamat.2014.09.010 ↗
46. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
47. Experimental and theoretical study of Ti20Zr20Hf20Nb20X20 (XV or Cr) refractory high-entropy alloys10.1016/j.ijrmhm.2014.07.009 ↗
48. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗