High-throughput evaluation of stress–strain relationships in Ni–Co–Cr ternary systems via indentation testing of diffusion couples
Source abstract
Abstract
The experimental investigations of multi-component alloy systems require considerable time and effort in terms of sample preparation; in particular, when studying numerous material compositions, the melting, processing, and machining of each specimen at each composition are significantly time- and effort-intensive. To overcome this challenge, the high-throughput evaluation of the stress–strain curves associated with the chemical compositions and microstructures of a Ni–Co–Cr ternary system was performed by estimating the yield stress and tangent modulus via indentation testing. Four diffusion couples (involving the diffusion of Ni and Co) with different nominal Cr contents were prepared, and more than 570 stress-strain curves at the points with different chemical compositions and microstructures were measured. The addition of Cr solute increased the elastic modulus and hardness and decreased the normalized pile-up height, indicating a low strain hardening behavior. The estimated yield stress was strongly dependent on the Cr content, whereas the Co content did not sufficiently affect the strength. Moreover, the effects of crystal orientation on the indentation testing of the face-centered cubic and hexagonal close-packed phases are discussed. The proposed technique can facilitate the evaluation of elastoplastic behavior in multi-component systems in single phase (fcc), which can help achieve the statistical data-driven material development of Ni-based superalloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced materials and composites · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Reed · 2006
2. Optimum microstructure combination for maximizing tensile strength in a polycrystalline superalloy with a two-phase structure10.1016/j.actamat.2012.12.004 ↗
3. Strength prediction of Ni-base disc superalloys: modified γ′ hardening models applicable to commercial alloys10.1016/j.msea.2020.140103 ↗
4. First-principles data for solid-solution strengthening of magnesium: from geometry and chemistry to properties10.1016/j.actamat.2010.06.045 ↗
5. Assessing elastic property and solid-solution strengthening of binary Ni–Co, Ni–Cr, and ternary Ni–Co–Cr alloys from first-principles theory10.1557/jmr.2018.174 ↗
6. Nanoindentation investigations to study solid solution hardening in Ni-based diffusion couples10.1557/jmr.2009.0135 ↗
7. Evaluation of solid-solution hardening in several binary alloy systems using diffusion couples combined with nanoindentation10.1007/s11661-017-4250-3 ↗
8. Effects of Ni, Cr and W on the microstructural stability of multicomponent CoNi-base superalloys studied using CALPHAD and diffusion-multiple approaches10.1016/j.jmst.2020.10.080 ↗
9. High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys10.1016/j.jallcom.2021.160618 ↗
10. High-throughput mapping method for mechanical properties, oxidation resistance, and phase stability in Ni-based superalloys using composition-graded unidirectional solidified alloys10.1016/j.scriptamat.2020.10.043 ↗
11. Mo segregation and distribution in Ti–Mo alloy investigated using nanoindentation10.1016/j.msea.2018.01.098 ↗
12. A combinatorial approach for studying the effect of Mg concentration on precipitation in an Al–Cu–Li alloy10.1016/j.scriptamat.2015.07.042 ↗
13. Combinatorial alloy design by laser additive manufacturing10.1002/srin.201600416 ↗
14. Compositionally graded metals: a new frontier of additive manufacturing10.1557/jmr.2014.208 ↗
15. The correlation of indentation experiments10.1016/0022-5096(70)90029-3 ↗
16. A statistical theory of solid solution hardening10.1002/pssb.19700410221 ↗
17. Materials informatics for the screening of multi-principal elements and high-entropy alloys10.1038/s41467-019-10533-1 ↗
18. The use of diffusion multiples to examine the compositional dependence of phase stability and hardness of the Co-Cr-Fe-Mn-Ni high entropy alloy system10.1016/j.intermet.2016.04.007 ↗
19. Plastic indentation in metals with cones10.1016/0022-5096(65)90018-9 ↗
20. Multiscale analysis of mechanical behavior of multilayer steel structures fabricated by wire and arc additive manufacturing10.1080/14686996.2020.1788908 ↗
21. Identification of the plastic properties of structural steel using spherical indentation10.1016/j.msea.2017.10.097 ↗
22. Theoretical model for predicting uniaxial stress-strain relation by dual conical indentation based on equivalent energy principle10.1016/j.actamat.2016.09.008 ↗
23. A dual triangular pyramidal indentation technique for material property evaluation10.1557/jmr.2015.67 ↗
24. K. Goto, I. Watanabe, T. Ohmura, Sensitivity analysis of indentation and inverse estimation of elastoplastic property, Proc. Mater. Mech. Conf., 2018, p. OS0903. 〈https://doi.org/10.1299/jsmemm.2018.OS0903〉.10.1299/jsmemm.2018.OS0903 ↗
25. Inverse estimation approach for elastoplastic properties using the load-displacement curve and pile-up topography of a single Berkovich indentation10.1016/j.matdes.2020.108925 ↗
26. Thermo-calc & DICTRA, computational tools for materials science, Calphad Comput10.1016/S0364-5916(02)00037-8 ↗
27. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
28. High-throughput nanoindentation for statistical and spatial property determination10.1007/s11837-018-2752-0 ↗
29. The Co-Ni (Cobalt-Nickel) system10.1007/BF02868090 ↗
30. The fcc solid solution stability in the Co-Cr-Fe-Mn-Ni multi-component system10.1016/j.actamat.2017.02.017 ↗
31. Measuring the elastic properties of anisotropic materials by means of indentation experiments10.1016/0022-5096(94)90033-7 ↗
32. Sensitivity of the residual topography to single crystal plasticity parameters in Berkovich nanoindentation on FCC nickel10.1016/j.ijplas.2015.10.002 ↗
33. T.B. Britton, H. Liang, F.P.E. Dunne, A.J. Wilkinson, The effect of crystal orientation on the indentation response of commercially pure titanium: experiments and simulations, Proc. R. Soc. A Math. Phys. Eng. Sci. 466, 2010, pp. 695–719. 〈https://doi.org/10.1098/rspa.2009.0455〉.10.1098/rspa.2009.0455 ↗
34. Microstructural and mechanical characteristics of Ni-Cr thin films10.1016/j.materresbull.2015.02.002 ↗
35. Determining suitable parameters for inverse estimation of plastic properties based on indentation marks10.1016/j.ijplas.2018.12.007 ↗
36. Indentation size effect in metallic materials: correcting for the size of the plastic zone10.1016/j.scriptamat.2005.02.009 ↗
37. Multi-component solid solution hardening10.1007/BF00540987 ↗
38. Theory of strengthening in fcc high entropy alloys10.1016/j.actamat.2016.07.040 ↗
39. Modeling solid solution strengthening in nickel alloys10.1007/s11661-997-0268-2 ↗
40. Plastic deformation of Ni-Cr single crystals10.1007/BF02813249 ↗
41. Effect of cobalt-content on mechanical properties of non-equiatomic Co–Cr–Ni medium entropy alloys10.2320/matertrans.MT-MK2019004 ↗